HON HAI PRECISION IND T60093 User Manual

PCI Full Rate ADSL Modem Driver Installation

Ambit PCI Full Rate ADSL Modem

A2RAI-081699

Installation Manual

For Windows 95, 98, and NT4.0

Dec 16, 1999

Date Printed: 12/20/99 Page 1 Man_A2.DOC1

PCI Full Rate ADSL Modem Driver Installation

A2RAI-081699

Table of Contents

ABOUT THIS GUIDE

1.INTRODUCTION......................................................................................................................................................3

SYSTEM REQUIREMENT ..............................................................................................................................................4

Hardware Requirement..........................................................................................................................................4

Software Requirement...........................................................................................................................................4

2.INSTALLING THE AMBIT PCI FULL RATE ADSL MODEM BOARD...............................................6

3.INSTALLING THE AMBIT PCI DEVICE DRIVERS AND UTILITY....................................................7

3.1 WINDOWS 98.........................................................................................................................................................7

3.2 WINDOWS 95........................................................................................................................................................11

3.3 WINDOWS NT4.0 WITH SERVICE PACK 3.......................................................................................................12

3.4 INSTALLING THE AMBIT PCI MODEM ICON UTILITY...................................................................12

4.VERIFYING THE DRIVER INSTALLATION ..............................................................................................13

4.1 WINDOWS 95 AND WINDOWS 98......................................................................................................................13

4.2 WINDOWS NT 4.0................................................................................................................................................14

5.CONFIGURING THE ADSL NETWORK FOR ETHERNET OVER ATM (RFC1483)...................14

6.ACTIVATING THE AMBIT PCI ADSL MODEM........................................................................................20

7.MONITORING THE AMBIT PCI ADSL MODEM......................................................................................20

8.UNINSTALLING THE AMBIT PCI ADSL MODEM AND TEST APPLICATION ..........................20

Date Printed: 12/20/99 Page 2 Man_A2.DOC2

PCI Full Rate ADSL Modem Driver Installation

A2RAI-081699

1. INTRODUCTION

The Ambit PCI Full Rate ADSL Modem is an internal ADSL modem, which conveniently plugs
into a PC system, eliminating the need for an external modem. The Ambit PCI ADSL Modem
connects to a telephone line via a standard RJ-11 connector and fully complies with practices
governing the PC world (e.g. Plug 'n Play). The Ambit PCI ADSL Modem supports DMT (Discrete
Multi-Tone) modulation to ensure interoperability with the service providers DSL systems.

Feature

Remote bridging with RFC 1483 encapsulation, both LLC-SNAP and PVC multiplexing options

WAN Protocols Supported under Microsoft Operation Systems

The following is a list of supported WAN protocols by Ambit PCI ADSL Network Modem.

Microsoft Windows
Operating Systems

Win95 -- OSR1 and OSR2 Yes

Win98 – 1st edition Yes

Win98 – 2nd edition Yes

NT 4.0 – Service Pack 3 Yes

RFC

1483

Date Printed: 12/20/99 Page 3 Man_A2.DOC3

PCI Full Rate ADSL Modem Driver Installation

A2RAI-081699

System Requirement

The following equipment and information is required (at a minimum) to setup your ADSL network
modem.

Hardware Requirement

The following is the minimum hardware requirement. Please make sure your PC system
meets ALL of the following requirements.

ü IBM PC/AT or its compatibles
ü CPU speed: Pentium 100Mhz or above
ü Hard disk space: 6Mbyte space available or above
ü CD-ROM: 24x CD-ROM drive or above
ü Main memory: 32Mbyte or above

Software Requirement

The Ambit PCI ADSL Modem supports most of Microsoft Windows operating systems. Please
make sure you have one of the following operating systems in your PC.

♦ Microsoft Windows 95 – OSR1 and OSR2, or
♦ Microsoft Windows 98 – 1st edition and 2nd edition, or
♦ Microsoft NT – NT 4.0 service pack 3.

NOTE: You need the Windows operating system installation files (CAB files) to complete
the installation.

Date Printed: 12/20/99 Page 4 Man_A2.DOC4

Before you start:

Insert Ambit
ADSL card

PCI Full Rate ADSL Modem Driver Installation

A2RAI-081699

Ambit ADSL Modem Installation

&

Configuration Flow Chart

Connect the
card to ADSL
network

Installing
driver and
application
programs

Reboot and
verify last
step

Configure
ADSL
network

Reboot and
activating
Ambit ADSL
modem

Monitoring
the Ambit
ADSL
modem

Date Printed: 12/20/99 Page 5 Man_A2.DOC5

PCI Full Rate ADSL Modem Driver Installation

2. INSTALLING THE ADSL NETWORK MODEM BOARD

To install the Ambit PCI Full Rate ADSL Modem in your PC and connect it to ADSL
network, follow these steps:

Insert ADSL Network Interface Card – Step 1

1) Open the shipping container and inspect each item for damage.

2) Remove all jewelry from your hands and wrists. Use only insulated or
nonconductive tools.

3) Unplug the PC and disconnect all cables.

4) Remove the PC cover.

5) Choose an empty bus mastering PCI slot.

6) Unscrew the screw holding the PCI slot’s backplate and remove it.

7) Insert the Ambit PCI ADSL Modem into an empty PCI slot.

8) Secure the NIC with the screw you removed earlier.

9) Replace the PC cover and reconnect all previously connected cables.

10) Turn on the power to the PC.

11) Proceed to the next section, “Connecting to the ADSL Network.”

A2RAI-081699

Connect NIC to ADSL Network – Step 2

Connect the telephone cable to the RJ-11 port on the Ambit PCI ADSL Modem.

Date Printed: 12/20/99 Page 6 Man_A2.DOC6

PCI Full Rate ADSL Modem Driver Installation

A2RAI-081699

3. INSTALLING THE AMBIT PCI DEVICE DRIVERS AND UTILITY

Please have the following information available in order to complete the installation and setup of
the Ambit PCI ADSL Modem.

1. TCP/IP properties, this includes the PVC values (VPI and VCI), IP address, the gateway, and
the domain name server. You will need this information to complete the configuration of the
network modem card. Please contact your MIS manager for more information regarding the
TCP/IP settings.

2. Windows 95, 98 or NT4.0 diskettes or Installation CD.

3.1 Windows 98

* BEFORE YOU START: You need the Windows 98 system installation files (CAB files)
to complete the installation (Which comes with your PC system).

This section describes how to install the network driver when your PC is running Windows 98.
There are two major revisions of Windows 98:

1) Windows 98 original (or it may be referred to as the 1st Edition)

2) Windows 98 2nd Edition

Please make sure your OS is either Windows 98 1st Edition or Windows 98 2nd Edition. Windows
98 2nd Edition can support advanced features which Windows 98 1st Edition can not. If you are
running Windows 98 2nd Edition, installing the Windows drivers to your system is highly
recommended. If you are not sure of the operating system version currently used, please contact
your original PC manufacturer for information. Make sure the Ambit PCI ADSL Network Modem
is installed. Turn your PC on.

Windows will find the Ambit ADSL Network Modem and will search for a device driver for the card.
Click Next.

Date Printed: 12/20/99 Page 7 Man_A2.DOC7