How it Works
HON HAI PRECISION IND
Loading...
J20H076
User Manual
28 pgs3.47 Mb0

HON HAI PRECISION IND J20H076 User Manual

Download
802.11abgn wireless module
802.11abgn wireless module
1.Level1Environment‐relatedSubstancesshouldNEVERbeused.
2.Purchaseink,paint,wirerods,andmoldingresinsonlyfromthebusinesspartnersthat SonyapprovesasGreenPartners.
3.RecycledResinandCoatedWireshouldbeprocuredfromGreenPartners
HON HAI PRECISION IND. CO., LTD. No.2, 2nd Dong Huan Road, 10th YouSong lndustrial District, Longhua Town, Baoan, ShenZhen
UserManual
IEEE802.11a/b/g/n2x2WiFiModule
ProjectName
CustomerPartNo. 021430401 ApprovalSheetRev. 1.0 FoxconnPartNo. J20H076.01
QCA9375IEEE802.11a/b/g/n2x2WiFiModule
Preparedby Reviewedby Approvedby
GallonG.R.Tao RobinXu Chang‐FuLin
1
CONTENTS
1. REVISION HISTORY ..................................................................... 3
2 PRODUCT OVERVIEW................................................................... 4
3 SIGNAL DESCRIPTION .................................................................. 5
3.1 SIGNAL DIAGRAM ........................................................................5
3.2 PINOUTS ...............................................................................5
3.2.1 Connector Specification
3.2.2 Pin definition
4 ELECTRICAL SPECIFICATION............................................................ 6
4.1 ABSOLUTE MAXIMUM RATING ..............................................................6
4.2 RECOMMENDED OPERATING CONDITION .....................................................6
4.3 POWER CONSUMPTION ...................................................................6
4.4 POWER UP SEQUENCE ...................................................................6
4.5 WLAN RF SPECIFICATIONS ...............................................................7
4.5.1 WLAN RF Specification- 802.11b
4.5.2 WLAN RF Specification- 802.11g
4.5.3 WLAN RF Specification- 802.11n (2.4GHz) HT20
4.5.4 WLAN RF Specification- 802.11a
4.5.5 WLAN RF Specification- 802.11n (5GHz) HT20
4.5.6 WLAN RF Specification- 802.11n (5GHz) HT40
......................................................................5
.............................................................5
.....................................................7
.....................................................8
.......................................9
....................................................10
.......................................11
.......................................12
5 SCHEMATIC AND PCB LAYOUT......................................................... 13
5.1 MODULE SCHEMATIC ....................................................................13
5.2 MODULE PCB LAYOUT ..................................................................15
5.2.1 PCB Stack-up
5.2.2 Component Placement
5.2.3 PCB Layout
6 ANTENNA SPECIFICATIONS ............................................................ 18
6.1 PCB PRINTED ANTENNA PATTERN .........................................................18
6.2 ANTENNA RADIATION PERFORMANCE .......................................................18
7 MODULE MECHANICAL SPECIFICATIONS ............................................... 21
8 HANDLING NOTICE .................................................................... 22
9 RELIABILITY TEST PLAN ............................................................... 23
10 MARKING INFORMATION............................................................... 25
11 PACKING INFORMATION ............................................................... 26
....................................................................15
.............................................................15
......................................................................16
2
1. Revision History
Date Documentrevision
2013/5/24 1.0
ChangeHistory
Initialrelease
3
!
2 Product Overview
This documentation outlines the QCA9375 WiFi Module. It is 802.11a/b/g/n compatible, ARIB STD-T66
Compatible; the module Host I/F is USB 2.0.
IEEE 802.11 a/b/g and 802.11n payload data rates for Wireless Local Area Network (WLAN).
1.1 Operating Frequency: 2402~2483.5MHz, 5150MHz~5250MHz, 5250MHz~5350MHz, 5470MHz~5725MHz, 5725MHz~5845MHz
1.2 Modulation: DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM
1.3 Data Rates: 1/2/5.5/11Mbps (11b)
6/9/12/18/24/36/48/54 Mbps (11g) MCS0~MCS15
1.4 Security: it supports WEP, TKIP, AES, WPA/WPA2 and WAPI
1.5 Full 802.11e QoS support including WMM.
1.6 Support Short Guard interval and Frame aggregation with A-MPDU
The module is designed with a WTB (Wire to Board) connector to connect to host. Dimension is 40.0mm
x37.5mm x 5.45mm (typical).
Below figure1 shows functional block diagram of the WLAN module.
Figure 1: Module Functional Block Diagram
5!
!
3 Signal Description
3.1 Signal Diagram
Below figure 2 shows its signal diagram.
Figure 2: Module Signal Diagram
3.2 Pinouts
3.2.1 Connector Specification JST WTB connector, Part Number: SM10B-GHS-TB(LF)
3.2.2 Pin definition
Pin# Pin Name Pin Type Description Remark
1 GND - Ground 2 WoW O Wake-up on wireless LAN Active high 3 CHIP_PWD_L I Reset to module Active low
4 GND -
5 USB_DM I/O
6 USB_DP I/O 7 VCC_3.3V Power 3.3V power supply +/-5% 8 VCC_3.3V Power
9 GND -
10 GND - Ground
!
Ground USB differential signal negative
USB differential signal positive
3.3V power supply +/-5%
Ground
6!
4 Electrical Specification
4.1 Absolute Maximum Rating
Symbol Condition Min. Typ. Max Unit
VCC_3.3V Respect to GND -0.3 3.3 3.6 V
CHIP_PWD_L Respect to GND -0.3 3.3 3.6 V
Max Ripple on Supplied Voltage 3.3V 165 mVpp
Operating Temperature -- -10 25 75
Storage Temperature -- -40 25 85
4.2 Recommended Operating Condition
Symbol Condition Min. Typ. Max Unit
VCC_3.3V Respect to GND 3.14 3.3 3.46 V
CHIP_PWD_L Respect to GND -0.3 3.3 3.46 V
℃
℃
4.3 Power Consumption
Symbol
3.3V
Condition Min Typ.
Tx Current(1Mbps/16dBm,MIMO) -- 465 --
Tx Current(11g: 54Mbps/14.5dBm,MIMO) -- 400 -- mA Tx Current(11gn: MCS15/13dBm/HT20,MIMO) -- 380 -- mA Tx Current(11a: 6Mbps/15dBm,MIMO) -- 630 -- mA Tx Current(11a: 54Mbps/12dBm,MIMO) -- 490 --
Tx Current(11an: MCS15/10dBm/HT40,MIMO) -- 425 -- mA
Rx Current: 2.4GHz -- 120 -- mA
Rx Current: 5GHz -- 130 -- mA
4.4 Power Up Sequence
Powerup(reset)timingisshownasbelow: WhenhostprocessorcontrolstheCHIP_PWD_Lresetpin,thenallpowersuppliesshouldbe stableforminimumof5μsbeforeCHIP_PWD_Lisde‐asserted.
Supply voltage 3.0 3.3
Max Unit
3.6 V
mA
mA
6
Parameter Description Min Max Unit
tA RisetimeofVDD3.3Vgoto90%of3.3V‐25 ms
tC TimefromVDD3.3Vreaching90%of3.3Vtolevelof
5‐ μs
CHIP_PWD_Lgoingabove50%ofVDD3.3V.
tB ThevalueistA+tC,duringthistime,thelevelof
 
CHIP_PWD_Lshouldstaybelow50%ofVDD3.3V.
4.5 WLAN RF Specifications
4.5.1 WLAN RF Specification- 802.11b
Items Contents
Specification IEEE 802.11b
Mode DSSS / CCK
Channel CH1 to CH13
Data rate 1, 2, 5.5, 11Mbps
TX Characteristics Min. Typ. Max. Unit
1. Power Levels (per chain)
1) Target Power@1Mbps 14.5 16a 17.5
2) Target Power@2Mbps
3) Target Power@5.5Mbps
4) Target Power@11Mbps
2. Spectrum Mask @ Target Power
1) fc-33MHz ＜ f ＜ fc-22MHz - - -50 dBr
2) fc-22MHz ＜ f ＜ fc-11MHz - - -30 dBr
3) fc+11MHz ＜ f ＜ fc+22MHz - - -30 dBr
4) fc+22MHz ＜ f ＜ fc+33MHz - - -50 dBr
3. Frequency Error -10 - +10 ppm
4. Modulation Accuracy(EVM)@ Target Power
1) 1Mbps - - -10 dB
2) 2Mbps - - -10 dB
3) 5.5Mbps - - -10 dB
14.5
14.5
14.5
16
16
16
a
a
a
17.5
17.5
17.5
dBm
dBm
dBm
dBm
4) 11Mbps - - -10 dB
5. Tx spurious emission - - -52 dBm
RX Characteristics Min. Typ. Max. Unit
6. Minimum Input Level Sensitivity
1) 1Mbps (FER≦8%) - -97 -92 dBm
2) 2Mbps (FER≦8%) - -94 -89 dBm
3) 5.5Mbps (FER≦8%) - -90 -85 dBm
4) 11Mbps (FER≦8%) - -87 -82 dBm
7. Maximum Input Level (FER≦8%) -10 0 - dBm
8. Rx spurious emission -65 dBm
a: 2412MHz target power reduced to 15dBm for FCC bandedge limit.
7
4.5.2 WLAN RF Specification- 802.11g
Items Contents
Specification IEEE 802.11g Mode OFDM Channel CH1 to CH13 Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps
TX Characteristics Min. Typ. Max. Unit
1. Power Levels (per chain)
1) Target Power@6Mbps
2) Target Power@9Mbps
3) Target Power@12Mbps
4) Target Power@18Mbps
5) Target Power@24Mbps
6) Target Power@36Mbps
7) Target Power@48Mbps
8) Target Power@54Mbps
2. Spectrum Mask @ Target Power
1) at fc +/- 11MHz - - -20 dBr
2) at fc +/- 20MHz - - -28 dBr
3) at fc > +/-30MHz - - -40 dBr
3. Modulation Accuracy(EVM)@ Target Power
1) 6Mbps - - -5 dB
2) 9Mbps - - -8 dB
3) 12Mbps - - -10 dB
4) 18Mbps - - -13 dB
5) 24Mbps - - -16 dB
6) 36Mbps - - -19 dB
7) 48Mbps - - -22 dB
8) 54Mbps - - -25 dB
4. Frequency Error -10 - +10 ppm
14.5 16b 17.5 dBm
14.5
14.5
14.5
14.5
13.5 15b 16.5 dBm
13.5 15b 16.5 dBm
12.5 14b 15.5 dBm
b
16
b
16
b
16
b
16
17.5 dBm
17.5 dBm
17.5 dBm
17.5 dBm
5. Tx spurious emission - - -54 dBm
RX Characteristics Min. Typ. Max. Unit
6. Minimum Input Level Sensitivity
1) 6Mbps (PER <10%) - -91 -84 dBm
2) 9Mbps (PER < 10%) - -89 -83 dBm
3) 12Mbps (PER < 10%) - -87 -81 dBm
4) 18Mbps (PER < 10%) - -84 -79 dBm
5) 24Mbps (PER < 10%) - -82 -76 dBm
6) 36Mbps (PER < 10%) - -80 -73 dBm
7) 48Mbps (PER < 10%) - -78 -70 dBm
8) 54Mbps (PER < 10%) - -76 -69 dBm
7. Maximum Input Level (PER < 10%) -20 - - dBm
8. Rx spurious emission - - -65 dBm
b: 2412MHz target power reduced to 11dBm, 2462MHz target power reduced to 12.5dBm for FCC bandedge limit.
8
4.5.3 WLAN RF Specification- 802.11n (2.4GHz) HT20
Items Contents
Specification IEEE 802.11n HT20 Mode OFDM Channel CH1 to CH13 Data rate (MCS index) MCS0/1/2/3/4/5/6/7
TX Characteristics
1. Power Levels (per chain)
1) Target Power@MCS0
2) Target Power@ MCS1
3) Target Power@ MCS2
4) Target Power@ MCS3
5) Target Power@ MCS4
6) Target Power@ MCS5
7) Target Power@ MCS6
8) Target Power@ MCS7
2. Spectrum Mask @Target Power
1) at fc +/- 11MHz
2) at fc +/- 20MHz
3) at fc > +/-30MHz
3. Modulation Accuracy(EVM)@Target Power
1) MCS0
2) MCS1
3) MCS2
4) MCS3
5) MCS4
6) MCS5
7) MCS6
8) MCS7
4. Frequency Error
Min. Typ. Max. Unit
13.5 15c 16.5 dBm
13.5
13.5
13.5
13.5
12.5 14c 15.5 dBm
12.5 14c 15.5 dBm
11.5 13c 14.5 dBm
- - -20 dBr
- - -28 dBr
- - -45 dBr
- - -5 dB
- - -10 dB
- - -13 dB
- - -16 dB
- - -19 dB
- - -22 dB
- - -25 dB
- - -27 dB
-10 - +10 ppm
15 15 15 15
c
c
c
c
16.5 dBm
16.5 dBm
16.5 dBm
16.5 dBm
5. Tx spurious emission - - -54 dBm
RX Characteristics
6. Minimum Input Level Sensitivity
1) MCS0 (PER < 10%) -
2) MCS1 (PER < 10%) -
3) MCS2 (PER < 10%) -
4) MCS3 (PER < 10%) -
5) MCS4 (PER < 10%) -
6) MCS5 (PER < 10%) -
7) MCS6 (PER < 10%) -
8) MCS7 (PER < 10%) -
7. Maximum Input Level (PER < 10%)
8. Rx spurious emission - - -65 dBm
c: 2412MHz target power reduced to 10dBm, 2462MHz target power reduced to 11.5dBm for FCC bandedge limit.
Min. Typ. Max. Unit
-89 -83
-87 -81
-85 -79
-82 -76
-79 -73
-77 -69
-75 -67
-73 -66
-20 -
- dBm
dBm dBm dBm dBm dBm dBm dBm dBm
9
4.5.4 WLAN RF Specification- 802.11a
Items Contents
Specification IEEE 802.11a Mode OFDM
Channel
Data rate 6, 9, 12, 18, 24, 36, 48, 54Mbps
TX Characteristics Min. Typ. Max. Unit
1. Power Levels (per chain)
1) Target Power@6Mbps
2) Target Power@9Mbps
3) Target Power@12Mbps
4) Target Power@18Mbps
5) Target Power@24Mbps
6) Target Power@36Mbps
7) Target Power@48Mbps
8) Target Power@54Mbps
2. Spectrum Mask @ Target Power
1) at fc +/- 11MHz - - -20 dBr
2) at fc +/- 20MHz - - -28 dBr
3) at fc > +/-30MHz - - -40 dBr
3. Modulation Accuracy(EVM)@ Target Power
1) 6Mbps - - -5 dB
2) 9Mbps - - -8 dB
3) 12Mbps - - -10 dB
4) 18Mbps - - -13 dB
5) 24Mbps - - -16 dB
6) 36Mbps - - -19 dB
7) 48Mbps - - -22 dB
8) 54Mbps - - -25 dB
4. Frequency Error -10 - +10 ppm
5150MHz~5250MHz, 5250MHz~5350MHz,
5470MHz~5725MHz, 5725MHz~5845MHz
13 14.5 13 13 13 13 12 13.5d 15 dBm
11 12.5d 14 dBm
10 11.5 13 dBm
d,e,f
16 dBm
d,e,f
14.5
14.5
14.5
14.5
d,e,f
d,e,f
d,e,f
16 dBm 16 dBm 16 dBm 16 dBm
5. Tx spurious emission - - -52 dBm
RX Characteristics Min. Typ. Max. Unit
6. Minimum Input Level Sensitivity
1) 6Mbps (PER <10%) - -90 -84 dBm
2) 9Mbps (PER < 10%) - -89 -83 dBm
3) 12Mbps (PER < 10%) - -87 -81 dBm
4) 18Mbps (PER < 10%) - -85 -79 dBm
5) 24Mbps (PER < 10%) - -82 -76 dBm
6) 36Mbps (PER < 10%) - -79 -73 dBm
7) 48Mbps (PER < 10%) - -75 -70 dBm
8) 54Mbps (PER < 10%) - -74 -69 dBm
7. Maximum Input Level (PER < 10%) -30 - - dBm
8. Rx spurious emission - - -58 dBm
d: 5180MHz~5240MHz, 6Mbps~48Mbps target power reduced to 12dBm for FCC power density limit. e: 5700MHz, 6Mbps~24Mbps target power reduced to 13.5dBm for FCC bandedge limit. f: 5180MHz, 6Mbps~24Mbps target power reduced to 12.5dBm for TELEC adjacent channel power limit 5200MHz~5320MHz, 6Mbps~24Mbps target power reduced to 14dBm for TELEC adjacent channel power limit.
10
4.5.5 WLAN RF Specification- 802.11n (5GHz) HT20
Items Contents
Specification IEEE 802.11a/n HT20 Mode OFDM
Channel
Data rate (MCS index) MCS0/1/2/3/4/5/6/7
TX Characteristics
1. Power Levels (per chain)
1) Target Power@MCS0
2) Target Power@ MCS1
3) Target Power@ MCS2
4) Target Power@ MCS3
5) Target Power@ MCS4
6) Target Power@ MCS5
7) Target Power@ MCS6
8) Target Power@ MCS7
2. Spectrum Mask @ Target Power
1) at fc +/- 11MHz
2) at fc +/- 20MHz
3) at fc > +/-30MHz
3. Modulation Accuracy(EVM)@ Target Power
1) MCS0
2) MCS1
3) MCS2
4) MCS3
5) MCS4
6) MCS5
7) MCS6
8) MCS7
4. Frequency Error
5. Tx spurious emission - - -54 dBm
RX Characteristics
6. Minimum Input Level Sensitivity
1) MCS0 (PER < 10%) -
2) MCS1 (PER < 10%) -
3) MCS2 (PER < 10%) -
4) MCS3 (PER < 10%) -
5) MCS4 (PER < 10%) -
6) MCS5 (PER < 10%) -
7) MCS6 (PER < 10%) -
8) MCS7 (PER < 10%) -
7. Maximum Input Level (PER < 10%)
8. Rx spurious emission - - -58 dBm
g: 5180MHz~5240MHz, MCS0~MCS5 target power reduced to 12dBm for FCC power density limit. h: 5700MHz, MCS0~MCS4 target power reduced to 12.5dBm for FCC bandedge limit. i: 5180MHz, MCS0~MCS5 target power reduced to 12.5dBm for TELEC adjacent channel power limit
5150MHz~5250MHz, 5250MHz~5350MHz,
5470MHz~5725MHz, 5725MHz~5845MHz
Min. Typ. Max. Unit
12 13.5 12 12 12 12 11 12.5 10 11.5 13 dBm
9 10.5 12 dBm
- - -20 dBr
- - -28 dBr
- - -45 dBr
- - -5 dB
- - -10 dB
- - -13 dB
- - -16 dB
- - -19 dB
- - -22 dB
- - -25 dB
- - -27 dB
-10 - +10 ppm
Min. Typ. Max. Unit
-30 -
g,h,i
15 dBm
g,h,i
13.5
g,h,i
13.5
g,h,i
13.5
g,h,i
13.5
g,i
14 dBm
-88 -83
-86 -81
-84 -79
-80 -76
-77 -73
-74 -69
-72 -67
-71 -66
15 dBm 15 dBm 15 dBm 15 dBm
- dBm
dBm dBm dBm dBm dBm dBm dBm dBm
11
4.5.6 WLAN RF Specification- 802.11n (5GHz) HT40
Items Contents
Specification IEEE 802.11a/n HT40 Mode OFDM
Channel
Data rate (MCS index) MCS0/1/2/3/4/5/6/7
TX Characteristics
1. Power Levels (per chain)
1) Target Power@MCS0
2) Target Power@ MCS1
3) Target Power@ MCS2
4) Target Power@ MCS3
5) Target Power@ MCS4
6) Target Power@ MCS5
7) Target Power@ MCS6
8) Target Power@ MCS7
2. Spectrum Mask @Target Power
1) at fc +/- 11MHz
2) at fc +/- 20MHz
3) at fc > +/-30MHz
3. Modulation Accuracy(EVM)@Target Power
1) MCS0
2) MCS1
3) MCS2
4) MCS3
5) MCS4
6) MCS5
7) MCS6
8) MCS7
4. Frequency Error
5. Tx spurious emission - - -52 dBm
RX Characteristics
6. Minimum Input Level Sensitivity
1) MCS0 (PER < 10%) -
2) MCS1 (PER < 10%) -
3) MCS2 (PER < 10%) -
4) MCS3 (PER < 10%) -
5) MCS4 (PER < 10%) -
6) MCS5 (PER < 10%) -
7) MCS6 (PER < 10%) -
8) MCS7 (PER < 10%) -
7. Maximum Input Level (PER < 10%)
8. Rx spurious emission - - -58 dBm
j: 5180MHz, MCS0~MCS6 target power reduced to 10dBm for FCC bandedge limit; 5320MHz, MCS0~MCS6 target power reduced to 9.5dBm for FCC bandedge limit k: 5510MHz, MCS0~MCS5 target power reduced to 10.5dBm for FCC bandedge limit.
5150MHz~5250MHz, 5250MHz~5350MHz,
5470MHz~5725MHz, 5725MHz~5845MHz
Min. Typ. Max. Unit
11 12.5 11 11 11 11 10 11.5
9 10.5j 12 dBm 8 9.5 11 dBm
- - -20 dBr
- - -28 dBr
- - -45 dBr
- - -5 dB
- - -10 dB
- - -13 dB
- - -16 dB
- - -19 dB
- - -22 dB
- - -25 dB
- - -28 dB
-10 - +10 ppm
Min. Typ. Max. Unit
-30 -
j,k
14 dBm
j,k
12.5
j,k
12.5
j,k
12.5
j,k
12.5
j,k
13 dBm
-85 -80
-82 -78
-79 -76
-76 -73
-73 -70
-71 -66
-69 -64
-68 -63
14 dBm 14 dBm 14 dBm 14 dBm
dBm dBm dBm dBm dBm dBm dBm dBm
- dBm
12
6 Antenna Specifications
6.1 PCB Printed Antenna Pattern
Ant 0 and Ant 1 pattern are horizontal mirror
Ant 0 Ant 1
6.2 Antenna Radiation Performance
Antenna VSWR and Isolation
Antenna Peak gain and Efficiency
18
Antenna 0 2.4GHz radiation pattern
Antenna 0 5GHz radiation pattern
19
Antenna 1 2.4GHz radiation pattern
Antenna 1 5GHz radiation pattern
20
7 Module Mechanical Specifications
Dimension (W x L x H ):
40.0mmx37.5mmx5.45mm
21
8 Handling Notice
ESD
There are semiconductors on the module, please handle the module under ESD protected and well-controlled environment (<100V).
Storage and Usage Condition
1. Moisture barrier bag must be stored under 40 bag is sealed by Foxconn.
2. The calculated shelf life for the dry packed product shall be a 12 months from the bag seal date.
3. If Moisture barrier bag is open, the component must be stored in an environment of <25±5℃ /10%RH
4. Please keep the module at 30
℃/70% RH.
℃, humidity under 90% RH, when the moisture barrier
22
9 Reliability Test Plan
23
24
10 Marking Information
Please refer to below for the laser marking details.
1: 2D barcode, content is total 37 digits, include MAC ID, Customer data, and SONY Part Number
2: MAC address 3: Foxconn model name – Label version 4: Foxconn manufacture order 5: SONY Part Number 6: Serial number + Customer data
25
11 Packing Information
26
27
Federal Communication Commission Interference St atement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferen ce to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Radiation Exposure Statem ent:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the
antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or
antenna.
As long as 2 conditions above are met, further transmitter
test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed
IMPORTANT NOTE: In the event that these conditions can not be met
(for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not
be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obt aining a se parate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: MCLJ20H076”. The grantee's FCC ID can be used only when all FCC compliance requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as sho w in this manual.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled env ironment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
This device is intended only for OEM integrators under the following conditions: (For module device use)
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module)
1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne e t les utilisateurs, et
2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé.
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid a nd the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authoriz ation.
NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. T he final end product must be labeled in a visible area with the following: “Contains IC: 2878D-J20H076”.
Plaque signalétique du produit final
Ce module émetteur est autorisé uniquement pour une utilisatio n dans un dispositif où l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suiv ante: "Conti ent des IC: 2878D-J20H076".
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
Manuel d'information à l'utilisateur final
L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel.
Caution :
(i) the device for operation in the band 5150-5250 MHz is onl y for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 54 70-5725 MHz shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
Avertissement:
Le guide d’utilisation des dispositifs pour réseaux loca ux doit inclure des instructions précises sur les restrictions susmentionnées, notamment :
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer à la limite de p.i.r.e.;
(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas.
(iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance
sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250- 5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositif s LAN-EL.
For Taiwan:低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大
功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，
並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。
1. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤。
2. 系統廠商應於平台上標示「本產品內含射頻模組：
XXXyyyLPDzzzz-x」字樣。
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use