HON HAI PRECISION IND J20H045 User Manual
COMPANY CONFIDENTIAL
a
9800#64886
HON HAI PRECISION IND. CO., LTD.
No.2, 2nd Dong Huan Road, 10th
YouSong lndustrial District, Longhua
Town, Baoan, ShenZhen
Tel: +86-755-28128988#26265
x:+86-755-2812
F
Customer Name: SONY(US)
Engineering Requirement Specification
IEEE 802.11b/g/n WLAN and Bluetooth v3.0+HS
Combo Card
(Project Name) Marvell 88W8787 WLAN/BT Combo
(Foxconn Part No.) J20H045.00
(Customer Part No.) NA
Prepared by Reviewed by Approved by
Gui-fang Robin Xu Chang-fu Lin
Total Pages Document
revision
Product
revision
Card
Date Sales
10 02 02S2 2011/09/08 Sabrina Lee
1
COMPANY CONFIDENTIAL
0. REVISION HISTORY ........................................................................ 3
1. INTRODUCTION ........................................................................... 4
1.1 SCOPE ................................................................................... 4
1.2 FEATURE ................................................................................. 4
2. PRODUCT FUNCTIONAL SPECIFICATION .................................................... 5
3. PRODUCT REQUIREMENTS ................................................................ 6
3.1 HARDWARE REQUIREMENTS .................................................................. 6
3.2 HARDWARE ARCHITECTURE .................................................................. 7
3.3 MECHANICAL OUTLINE DRAWING .............................................................. 8
3.4 SOFTWAR E REQUIREMENTS .................................................................. 8
3.4.1 Software setup ....................................................................... 8
3.4.2 Operating System Support ............................................................. 9
3.4.3 Software Functions .................................................................... 9
4. COMPATIBILITY AND CERTIFICATION REQUIREMENTS ...................................... 9
5. PRODUCT QUALITY ....................................................................... 9
6. ENVIRONMENTAL REQUIREMENTS ......................................................... 9
6.1 TEMPERATURE ............................................................................ 9
6.1.1 Operating Temperature Conditions ...................................................... 9
6.1.2 Non-Operating Temperature Conditions .................................................. 9
6.2 HUMIDIT Y ................................................................................. 9
6.2.1 Operating Humidity Conditions .......................................................... 9
6.2.2 Non-Operating Humidity conditions ..................................................... 10
2
0. Revision History
COMPANY CONFIDENTIAL
Date
2011/03/25 00
2011/07/01 01
2011/09/08 02
Document
revision
Product
revision
00S0
01S1
02S2
Change Description
1. Initial release
1. Change dual band to single band
1. Change single side to double side
3
COMPANY CONFIDENTIAL
1. Introduction
Project Name: 88W8787 WiFi(11b/g/n)/BT combo
Project Number: J20H045.00
This documentation describes the engineering requirements specification of 88W8787
(WLAN+BT) combo Card. It is a confidential document of Foxconn.
1.1 Scope
The J20H045.00 combo design is based on the Marvell 8787 single-chip solution. It’s
operating in 2.4GHz, compatible with the IEEE 802.11b/g/n standard and Bluetooth
BTv3.0+HS standard. The 802.11n data rate provides for MCS0 to MCS7 (HT20,HT40).
The 802.11g data rate provides for 54, 48, 36, 24, 18, 12, 9, 6Mbps, and 802.11b data
rate provides for 11, 5.5, 2, 1Mbps. In addition, it’s also compatible with BTv2.1+EDR.
This combo card has implemented some efficient mechanisms in its software and
hardware to maximize the performance of WLAN and BT.
1.2 Feature
Marvell 88W8787 combo card with B2B connector
Compatible with IEEE 802.11b/g/n standard
Compatible with BT v3.0 + HS standard，also compatible with BTv2.1+EDR
Three U.FL RF connector (two for WiFi, one for BT)
Support 11n HT20/HT40 mode
WLAN/BT data transactions are handled over SDIO interface
Support Wireless multimedia enhancements quality of service support (QoS)
Support WEP,TKIP, and AES hardware encryption
ROHS compliance
4
COMPANY CONFIDENTIAL
2. Product Functional Specification（draft）
WLAN
BT
Standard
Data Rate 802.11b: 11, 5.5, 2, 1 Mbps;
Modulation Techniques 802.11b: CCK, DQPSK, DBPSK
Frequency Range
Media Access Control CSMA/CA with ACK
Transmit Output Power
(Tolerance: +/-1.5dB)
Receiver Sensitivity
Radio Modulation
Technology
Operating Frequency 2.402GHz ~ 2.480GHz
Channel Numbers 79 channels with 1MHz BW
Transmitter Output Power +1.69dBm MAX.
Maximum Receiver Signal -20dBm
Initial Carrier Freq. Tolerance ≤ ± 75 kHz
Carrier Drift – Drift Rate ≤± 20 kHz/50uS
Carrier Drift – Drift (DH5) ≤± 40 kHz
Multi-slot Sensitivity -70dBm @BER < 0.1%
Modulation Index – ∆f1 avg. 140 ≤ ∆f1 avg. ≤ 175 (Unit : kHz )
Modulation Index – ∆f2 max ∆f2 max ≥ 115 (Unit : kHz )
Modulation Index – ∆f2
avg/∆f1 avg.
Operating Voltage
Operating Temperature
Host Interface
RF connector type
IEEE802.11n/g/b;
802.11 g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11n:
HT20 mode: 72.2, 65, 57.8, 43.3, 28.9, 21.7, 14.4, 7.2Mpbs
HT40 mode: 150, 135, 120, 90, 60, 45, 30, 15Mbps
802.11 g: 64QAM,16QAM, QPSK, BPSK
802.11n: MCS0, MCS4, MCS5, MCS6, MCS7 in HT20/HT40
Modes
2.400~2.484GHz
11b 11Mbps
17 dBm
11b 11Mbps
-87dBm
@PER<8%
FHSS
≥ 0.80 (80%)
3.3V+/-10%
0℃ to +70℃
SDIO for WLAN and BT
U.FL type
Three antenna connectors（two for WiFi diversity , one for BT）
11g 54Mbps
15dBm
11g 54Mbps
-71dBm
@PER<10%
11n MCS7
14 dBm(HT20)
14 dBm(HT40)
11 n
MCS 7_HT20:
-68dBm@PER<10%
MCS 7_HT40:
-65dBm@PER<10%
5
Loading...