Hong Fu Jin Precision Industry CMC181UR Users Manual
CMC181
UHF RFID READER
CMC181
User Manual
Version (1.0)
Jul. 29, 2010
PDF created with pdfFactory Pro trial version www.pdffactory.com
CMC181
TABLE OF CONTENTS
1. INTRODUCTION...................................................................................................................................2
1.1 Foreword...............................................................................................................................2
1.2 Product Functions.................................................................................................................2
1.3 Product Specification............................................................................................................3
1.4 Applied Fields........................................................................................................................4
2. CONFIGURATION AND COMPONENTS INTRODUCTION ...........................................................................6
2.1 Configuration Introduction.....................................................................................................6
2.2 Components Introduction......................................................................................................7
RF Cable.....................................................................................................................7
3. SYSTEM INSTALLATION.......................................................................................................................8
3.1 Installing the RFID Reader....................................................................................................8
3.2 Notes.....................................................................................................................................9
3.2.1 Notes for Reading the Tag...............................................................................9
3.2.2 Notes for Writing the Tag..............................................................................10
4. APPENDIX........................................................................................................................................12
4.1 Notes...................................................................................................................................12
4.2 Packaging List.....................................................................................................................13
5. FCC STATEMENT .............................................................................................................................13
Page 1 of 14
PDF created with pdfFactory Pro trial version www.pdffactory.com
CMC181
1. Introduction
1.1 Foreword
CMC181 is a new generation ultra-high frequency RFID reader. It complies with
FCC ISM (902 ~ 928 MHz) band, and is used to read the electronic tag of
ISO18000-6C (i.e.: EPC C1 GEN2). It has features as small-size, high
performance, convenient operation, widely-used, safety and reliability etc.;
meanwhile, it provides API function so that it can help you to do further
development. In addition, with integrated web interface, management software
and database, CMC181 RFID reader can be applied to warehouse logistics,
VMI-HUB, pallet management, ID identification, material control and access
control and so on.
1.2 Product Functions
CMC181 RFID reader includes features of fast speed of read / write, long read /
write range, multi-tag read capability (several tags can be read at the same time),
operating the tag in specific application system only and strong anti-collision
capability for frequency hopping system and so on.
The functions of CMC181 RFID reader are listed as below:
l Read: it can read the tag’s ID number and the data in a specific memory zone
of tag. In addition, it can not only read the data from single tag, but also read
the data from multiple tags at the same time.
l Write: it can write the data to the specific memory zone of tag.
l Wake-up: to prevent from the disturbance from other system’s tags and make
sure the communication between the reader and tags is reliable and accurate,
only the awakening tag can be communicated with the reader.
l Locking: it can be set “Lock” at specific memory zone of tag, so that the data
in this zone can be locked and protected permanently. Besides that, it can
check the locked address in any memory zone (0~31).
Page 2 of 14
PDF created with pdfFactory Pro trial version www.pdffactory.com
CMC181
There are four RF ports in CMC181 RFID reader to connect with four external
antennas, and the antennas can be switched fast by using software (the switch
interval also can be set).
In addition, CMC181 RFID reader provides API function and all kinds of user
interfaces of configuration parameter. You can set the RFID reader’s parameters
by executing the demo in PC, such as sensitivity, working frequency and reading
mode etc., to satisfy the requirements of working environment.
1.3 Product Specification
Features:
l Reading distance: ≥ 10 m (depends on the gain of antenna and tags working
environment)
l Writing distance: ≥ 3 m (depends on the gain of antenna and tags working
environment)
l Applied tag: the tags which comply with EPC Global class 1 Gen 2 protocol in
UHF frequency range (e.g.: Ti, Philips, UPM, Avery Dennison etc.)
l Convenience: it can help to check the goods without opening the box for
stocktaking.
l Strong ability of anti-collision: it can read 180 tags per second. Besides, its
scanning distance can be up to 12 m (adjustable for distance).
l Low power: the current is less than 1 A when sending RF power with
30 dBm.
l It can be connected directly with embedded industrial control system.
l Standard API interface: it provides API function and uses standard API
interface, the VC, VB and Delphi development environments can be
supported well.
Page 3 of 14
PDF created with pdfFactory Pro trial version www.pdffactory.com
CMC181
Specifications:
l Physical Characteristics: Dimension: 185*165*50(mm)
Weight: 1.5 Kg
l Environment: Operating Temp: -10 to + 60℃
Storage Temp: -20 to + 70℃
Humidity: 10% to 95% non-condensing
l Power: Power adapter for 110-240 VAC auto-ranging to DC 12V, 3Amps
l RF power: 12 dBm ~ 30 dBm (programmable in software)
l Working frequency: 902 ~ 928 MHz (with central frequency of 915 MHz)
l Support protocol: ISO18000-6C (EPC C1 GEN2)
l Communication port: USB
l RF interface: 4 SMA reverse antenna ports
1.4 Applied Fields
l Vehicular transport management: monitoring and managing the vehicle and
container transport.
l Customs clearance management: managing the goods for clearance and
transition.
l Warehouse and Logistics management: managing the circulation of
commodities and warehouse; the letters and parcel.
l Access control management: including the vehicle and personnel access
management.
l Production process management: monitoring the components in whole
production process.
l Equipment management: monitoring the circulation of equipment.
Page 4 of 14
PDF created with pdfFactory Pro trial version www.pdffactory.com
Loading...