Hongda Holding Water Technology A2T User Manual

HONGDA HOLDING WATER TECHNOLOGY CO.,LTD

Service hotline: Tel: [phone] Http://www.sparklingwater.info E-mail: [e-mail]

1

USER

USER MANUAL

MANUAL

Firstly

Thanks

for choosing our product.

Please read this Instruction Manual

carefully

before using.

Please take good care of this Instruction Manual for future reference.

Suitable

for

The large-scale atmospheric pure water dispenser Model:

A2T

HONGDA HOLDING WATER TECHNOLOGY CO.,LTD

Service hotline: Tel: [phone] Http://www.sparklingwater.info E-mail: [e-mail]

2

Product introduction

Thank you for purchasing atmospheric water generator. It is an advanced drinking water equipment for household
and office use, especially for water provision on the coastland, islands and ships. By making use of the most advanced
technology, this water dispenser integrates the air water condensing system, water filtering and disinfecting system, and
water heating and cooling system, which has greatly improved the water intaking by air and satisfying the water needs in
pulic places and other environments.

This machine controled by microcomputer system,which makes sure all the parts of the machine working normally.
With internal prevent interference function and filter system protection function moreover can stop work automatically when
the machine filter system break down.

This machine has ultraviolet radiation sterilization system, to ensure the completely destroy the bacteria and
microorganisms.

This machine uses the excellent components to ensure the operation reliability of the entire machine.

The filter system adopts the integrated module design, thus making change of the filter element more convenient.

Operating Principle

This machine mainly makes the water from the humidity in the air. In other words, it totally relies on the water vapour in
the air to make water. The best water making can only be achieved under the ideal environment where the humidity is around
70％--80％. Water also can be made in places with low humidity, but the speed is slow. This is also the same case for places
with high humidity and low temperature. So it is better to test the humidity of every position in a room before the machine
placed. In a living house, positions near the kitchen or window, or spacious places, will see high humidity.

If the air water dispenser wants to reach the best operating state, the temperature of ambient environment is very
important, with the ideal temperature of 24℃--29℃. However, this does not mean that the dispenser will fail to work in places
where the temperature is higher or lower. More drinking water will be produced at faster speed under ideal temperature. So it

is necessary to measure the indoor temperature before placing the dispenser.

As water is made by converting the water vapour in the air, this machine will become a very powerful humidity intaker.
Therefore, for the sake of health, please use this machine only in rooms where the humidity is ensured, or when the window
is opened and the indoor and outdoor air exchange is available.

VFD display screen

Parts illustration