Honeywell T6373, T6372 User Manual

XE70 SERIES T6372/T6373
PRODUCT SPECIFICATION SHEET
The T6372 and T6373 are designed to control the valve, or the valve and the fan in 2-pipe fan-coil applications.
The thermostat operates an on/off valve to provide control at the desired setpoint temperature.
The fan can also be controlled from the thermostat. In some cases it is wired to run continuously, and can be switched off with the system ON/OFF switch, while with other models there is a choice of running the fan continuously, or cycling it with the thermostat.
Versions are available with a manual 3-speed fan switch, and with a system on-off switch.
Heat/cool changeover operation is also possible on some versions. This function can be accomplished either by a manually operated heat/ cool switch on the front of the thermostat or in some versions automatically by the use of a pipe thermostat on the supply water pipe of the fan-coil.
FEATURES
Dual diaphragm sensing element ensures close
temperature control for all loads and applications
Attractive modern styling makes this thermostat ideal
for locating in the occupied space, particularly in offices or hotels
All versions have heat anticipator, which improves
temperature control in both heating and cooling operation
Thermostat mounts directly onto a wall or conduit
box
Slide switches allow manual control of system
operation and fan speed
Auto heat/cool changeover possible (on some
versions) by using pipe thermostat
Optional extras:
- range stops F42006646-001 (20 per pack, enough for 10 thermostats)
FAN-COIL THERMOSTATS
2-PIPE FAN-COIL CONTROL
xe70-en0r8403-uk07r0515
T6372/T6373 FAN -COIL TERMOSTATS 2-PIPE FAN-COIL CONTROL
2
Model
Switches
Features
ON/OFF
3-speed
Fan/
Heat/Cool
Heat/Cool
Heat/Off/
Heat/Fan/
Fixed
Auto
Fan
Auto/Cont
Cool
Cool
Deadband
Change-
over
(SPST)
(SPTT)
(SPDT)
(SPDT)
(DPDT)
(DPTT)
(DPTT)
T6372A1018
T6372B1032
T6372C1014
T6373A1017
T6373A1157
T6373B1015
T6373B1064
T6373C1013
Setpoint range
10...30oC. By means of a large setpoint
dial
Supply voltage
230 V~, 50...60 Hz
Thermostat switch
S.P.D.T.
Performance
Typical differential 1K (heating & cooling)
at 20oC at 50% load with anticipator connected
Electrical ratings
4(2) A, 230 V~ Typical loads are fans, zone valves and
relays
Operational life
Greater than 100,000 cycles (all loads)
for thermostat contacts at 230 V~ Greater than 6,000 operations for all manually operated switches
Mounting
Mounts directly onto wall or wall-box
(mounting screws supplied)
Wiring
Up to 8 screw-in terminals per unit,
capable of accepting wires up to 1.5 mm2
Enclosure
Plastic 2-piece housing
Dimensions
85 x 130 x 40 mm (w x h x d).
Protection class
IP30
Environmental requirements
Operating temperature range 0 to 40oC
Shipping and storage temperature range
-20 to 50oC Humidity range 0 to 90% rh, non­condensing
Approvals
The XE70 range is CE, RoHs and WEEE compliant. For regulatory information, DoC / CoC D0046 is available on request. Product must be wired as shown for CE compliance.
DIMENSIONS
xe70-en0r8403-uk07r0515
Loading...
+ 2 hidden pages