XE70 SERIES
FEATURES
∙Dual diaphragm sensing element ensures close temperature control for all loads and applications
∙Attractive modern styling makes this thermostat ideal for locating in the occupied space, particularly in offices or hotels
∙All versions have heat anticipator, which improves temperature control in both heating and cooling operation
∙Thermostat mounts directly onto a wall or conduit box
T6370/T6371
FAN-COIL THERMOSTATS
FAN ONLY CONTROL
PRODUCT SPECIFICATION SHEET
The T6370 and T6371 are designed to control the fan only in fan-coil or ventilation applications.
In all cases the thermostat cycles the fan to provide control at the desired setpoint temperature.
Versions are available with a manual 3-speed fan switch, and with a system on-off switch.
Heat/cool changeover operation is also possible on some versions. This function can be accomplished by a manually operated heat/cool switch on the front of the thermostat. A version for 2-pipe fan-coil units allows automatic heat/cool changeover by connection of a pipe thermostat on the supply water pipe of the fan-coil.
∙Slide switches allow manual control of system operation and fan speed
∙Auto heat/cool changeover possible (on one version) by using pipe thermostat
∙Optional extras available are : - range stops F42006646-001
- tamperproof cover F42008489-001 (opaque), F42008489-002 (transparent)
EN0R8402 R4 1998
T6370/T6371 FAN -COIL THERMOSTATS FAN ONLY CONTROL
SPECIFICATIONS
Model |
|
|
|
Switches |
|
|
|
Features |
|
|
ON/OFF |
3-speed |
Fan/ |
Heat/Cool |
Heat/Cool |
Heat/Off/ |
Heat/Fan/ |
Fixed |
Auto |
|
|
Fan |
Auto/Cont |
|
|
Cool |
Cool |
Deadband |
Change- |
|
|
|
|
|
|
|
|
|
over |
|
(SPST) |
(SPTT) |
(SPDT) |
(SPDT) |
(DPDT) |
(DPTT) |
(DPTT) |
|
(Aquastat) |
|
|
|
|
|
|
|
|
|
|
T6370A1010 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
T6371A1019 |
4 |
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
T6371B1017 |
4 |
4 |
|
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
T6371C1015 |
4 |
4 |
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
|
|
|
Setpoint range : 10...30oC. By means of a large setpoint
|
|
dial |
Supply voltage |
: 230 V~, 50...60 Hz |
|
Thermostat |
: |
S.P.D.T. |
switch |
|
|
Performance |
: |
Typical differential 1 oC (heating & |
|
|
cooling) at 20 oC at 50% load with |
|
|
anticipator connected |
Electrical ratings |
: 4(2) A, 230 V~ |
|
|
|
Typical loads are fans |
Operational life : Greater than 100,000 cycles (all loads)
|
for thermostat contacts at 230 V~ |
|
Greater than 6,000 operations for all |
|
manually operated switches |
Mounting |
: Mounts directly onto wall or wall-box |
|
(mounting screws supplied) |
Wiring |
: |
Up to 8 screw-in terminals per unit, |
|
|
capable of accepting wires up to 1.5 |
|
|
mm2 |
Enclosure |
: |
Plastic 2-piece housing |
Dimensions |
: |
85 x 130 x 40 mm (w x h x d). |
Protection class |
: |
IP30 |
Environmental |
: |
Operating temperature range 0 to 40oC |
requirements |
|
Shipping and storage temperature range |
|
|
-20 to 50oC |
|
|
Humidity range 0 to 90% rh, non- |
|
|
condensing |
Approvals |
: |
CE mark, complying with standards |
|
|
EN60730-1 (1995), EN55014-1 (1997), |
|
|
EN55014-2 (1996). |
|
|
Product must be wired as shown for CE |
|
|
compliance. |
DIMENSIONS
|
|
|
|
|
|
|
|
|
EN0R8402 R4 1998 |
2 |
|