Honeywell RP416A2008 PRODUCT DATA
GENERAL
The RP416A2008 Electric-Pneumatic Relay is an electrically-
operated pneumatic switch used as an interlock between an
electrical system and a pneumatic control system. It is a
solenoid valve which opens or closes the air supply to pneumatic controls. The control input is an ON/OFF line voltage
signal to the RP416A2008.
The relay can also be used as a stop-and-bleed relay or as a
diverting relay or as a selector relay. Further, it is also
suitable for manual operation (see Fig. 4).
RP416A2008
PNEUMATIC RELAY
PRODUCT DATA
FEATURES
· Operates in any position.
· Wall mounting or DIN-rail mounting as per EN50022
(35 x 7.5).
· Electrical connection by compact 3-pole plug IP65.
· Maintenance-free.
SPECIFICATIONS
Supply voltage 230 Vac, 50/60 Hz
Power consumption 9 / 7 VA
Protective standard IP65 (EN60529)
Safety class I as per EN 60730-1
Connectors suitable for 1.5 mm
Pneumatic connectors for polyethylene tubing, 6 x 1 mm
or ¼" outer diameter
Suitable media oil-free air under pressure, all
neutral and non-aggressive
gases
Max. operating pressure 8 bar
Air capacity > 55 L
Air filter 50 mm
Permissible Ambient Temperatures
During operation -10...+40 °C
During storage -40...+100 °C°
4
/min. (at 1 bar supply
n
against atmosphere)
18
21.2
2
wire
33
50
76
M5x13
61
Fig. 1. Dimensions (in mm)
® U.S. Registered Trademark EN0B-0458GE51 R0704
Copyright © 2004 Honeywell Inc. • All rights reserved
RP416A2008 PNEUMATIC RELAY – PRODUCT DATA
Fig. 2. Wall mounting
43
43
Fig. 5. Mounting multiple units
Load No Load
bleed bleed
Fig. 3. DIN rail mounting
1 2
Fig. 4. Wiring
1
0
0 = automatic
1 = manual
P (main) P (main)
Fig. 6. Switching action
A (a ctu ato r )A (actuator)
Automation and Control Solutions
Honeywell GmbH
Böblinger Straße 17
D-71101 Schönaich
Phone: (49) 7031 63701
Fax: (49) 7031 637493
http://europe.hbc.honeywell.com
Subject to change without notice. Printed in Germany Manufacturing location certified to
EN0B-0458GE51 R0704
Loading...