Honeywell M7410A PRODUCT DATA

SMALL FLOATING LINEAR ACTUATORS

APPLICATION

The Honeywell M7410A actuators provide floating control of
specified VSOx series small linear valves.

They are used in fan-coil-units, induction units, small re­heaters and recoolers, and for zone control applications. They
are employed in electronic temperature control systems with
hot and/or cold water as the controlled medium.

They are suitable for Honeywell Excel Series controllers as
well as for Honeywell individual room temperature controllers.
These controllers track the precise valve position by counting
the number of individual control pulses which move the valve
from one position to another. For this reason, the actuators do
not need end switches or a feedback potentiometer. The
absence of these mechanical components ensures long-term
reliability.

The M7410A actuators are also compatible with any controller
providing intelligent position control and having a built-in shut­off function.

The M7410A actuators are well-suited for applications in
which space is limited and minimum power consumption is
required. They feature an attractive and rugged design.

M7410A

PRODUCT DATA

FEATURES

• Suitable for three-position floating control without

proportional feedback

• Small size allows installation where space is limited

• Low power consumption

• Reliable long-term operation because mechanical

feedback potentiometers and mechanical end
switches are not required

• Magnetic coupling for stem force limitation and self-

adjustment of the close-off point

• Supplied with pre-wired connection cable

• Simple, standardized M30 x 1,5 valve/actuator

coupling – no tools required for mounting

SPECIFICATIONS

Control type floating (three-point)
Input voltage 24 Vac +10%/-30%; 50/60 Hz
Power consumption 0.7 VA
Stroke 4 mm
Running time 53 sec at 50 Hz
Stem force 90 N
Protection standard IP43 in accordance with EN

Insulation class II/III (according to EN 60730),

Connection cables 0.9 or 3.0 meters
Ambient operating temp. 0…60 °C
Housing type A
Weight 0.4 kg
Suitable valves VSOx
Manual operation by valve protection cap, only

60529

depending upon model

® U.S. Registered Trademark EN0B-0634GE51 R1008
Copyright © 2008 Honeywell Inc. • All rights reserved

M7410A SMALL FLOATING LINEAR ACTUATORS

OPERATION

58

80

6049

Fig. 1. Dimensions

ORDERING INFORMATION

OS no.

M7410A1001 floating 90 N 0.9 m
M7410A1001-3M floating 90 N 3.0 m

control

type

stem force cable length

FUNCTION

The movement of the electric actuators is produced by a
screw spindle which is driven in both directions by a
synchronous motor through a set of gears. A magnetic clutch
limits the torque of the gear assembly and the driving force of
the actuators. The actuators are fixed to the valve body by
means of a coupling ring requiring no tools for mounting. The
actuators are maintenance-free and supplied completely with
a ready-to-wire connecting cable

MOUNTING

Before the actuator is fixed to the valve, the adjustment cap
must be removed (see Fig. 3). Make sure that the actuator is
in the open position (factory-supplied position) before fixing
the actuator to the valve body.

Fig. 3. Removing the protection cap

The actuator must be mounted by hand. Do not use tools or
additional force insofar as this may damage the actuator and
valve.

MOUNTING POSITION

The actuator may be mounted only beside or above the valve.
Adjust the valve in the correct position before mounting the
actuator.

Fig. 2. Mounting positions

EN0B-0634GE51 R1008 2

Fig. 4. Mounting the actuator