Page 1
Modutrol IV Motors
M7284; M7285; M7286; M7294 Modutrol IV™ Series 2 Motors
Series 72 Modutrol IV Motors are spring return and non-spring
return motors (per motor type) used to control dampers and
valves. The motors accept a current or voltage signal from an
electronic controller to position a damper or valve at any point
between open and closed.
• Integral spring return returns motor to normal position
in the event of power failure on spring return models
• Integral junction box provides NEMA 3 weather protection
if motor is mounted in the upright position
• Motor and circuitry operate from 24 Vac
• Quick-connect terminals are standard--screw terminal adapter is available
• Adapter bracket for matching shaft height of older motors is available
• Motors have field adjustable stroke (90 to 160 degrees)
• Integral auxiliary switches are available factory mounted,
or can be field added
• Spring return motors can operate valve linkages from power end or
auxiliary end shafts for normally closed or normally open valve applications
• All models have dual shafts (slotted and tapped on both ends)
• All models have auxiliary switch cams
• Fixed torque throughout the entire voltage range
• Motors are designed for either normally open or
normally closed valves and dampers
• Models available with adjustable start (zero) and span
• Models available with 4 to 20 mA input signal
• Models available with 2 to 10 Vdc input signal
• Die-cast aluminum housing
Application Type: Electric
Dimensions, Approximate: 6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in.
deep (164 mm high x 140 mm wide x 185 mm deep)
Feedback: No
Frequency: 50 Hz; 60 Hz
External Auxiliary Switches Available: Ye s
Auxiliary Switch Ratings AFL - 120 Vac: 7.2A
Auxiliary Switch Ratings ALR - 120 Vac: 43.2A
Auxiliary Switch Ratings AFL - 240 Vac: 3.6A
Auxiliary Switch Ratings ALR - 240 Vac: 21.6A
Internal Transformer: 50004263-002
Mounting: Foot-mounted
Motor Shafts: Dual-ended shaft
Shaft Shape: square
Shaft Dimensions: 0.375 in. (10 mm)
Shaft Rotation (upon control signal increase):
M7284A,C,Q; M7285A,C,Q; M7294A,Q: Clockwise (as viewed from
power end) (normally closed)
M7286G: Counter-clockwise (as viewed from power end) (normally open)
Deadweight Load on Shaft (Either End): 200 lbs.
Deadweight Load (Combined on both Shafts): 300 lbs.
Ambient Temperature Range: -40 F to +150 F (-40 C to +60 C)
Weight: 7.5 lb
Approvals
CE: EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
Underwriters Laboratories, Inc: Listed: File No. E4436, Guide No.
XAPX for USA and Canada
Accessories:
4074ERU-Weatherproofing kit. Protects motor from driving rain when
mounted in any position
220736A-Internal Auxiliary Switch Assembly - 1 Switch
220736B-Internal Auxiliary Switch Assembly - 2 Switches
220738A-Adapter Bracket. Adjusts shaft height to match Modutrol III motors
220741A2-72-Screw Terminal Adapter Kit for Series 72 Modutrol IV
Series 2 motors - Converts quick-connect terminals to screw terminals
221455A-Infinitely adjustable Motor Crank Arm
50017460-001-24/120/230 Vac Internal Transformers for Series 2 and 3
Motors
50017460-003-120 Vac Internal Transformers for Series 2 and 3 Motors
Fail
Torque/Force
Product Number
M7284A1004/U
M7284A1012/U
M7284A1038/U
M7284A1079/U
M7284C1000/U
M7284C1083/U
426 customer.honeywell.com 70-6910
Safe
Mode
Non-
150 lb-in. 17 Nm 120V 30-60
Spring
Return
Non-
150 lb-in. 17 Nm 120V 30-60
Spring
Return
Non-
75 lb-in. 8 5 Nm 120V 15-30
Spring
Return
Non-
150 lb-in. 17 Nm 24V 30-60
Spring
Return
Non-
150 lb-in. 17 Nm 120V 30-60
Spring
Return
Non-
150 lb-in. 17 Nm 24/
Spring
Return
Vo lt ag e
120/
230V
Nominal
Timing
(sec)
sec
sec
sec
sec
sec
30 sec Screw
Electrical
Connections
Screw
terminals
Screw
terminals
Screw
terminals
Quickconnect
terminals
Screw
terminals
terminals
Control
Signal
Modulating,
4-20 mA
Modulating,
4-20 mA
Modulating,
4-20 mA
Modulating,
2-10 Vdc
Modulating,
4-20 mA
Modulating,
4-20 mA
Internal
Auxiliary
Switch
0 90
0 160
0 90
0 160
2 90
2 90
Factory
Stroke
Setting Stroke Includes Comments
degrees
degrees
degrees
degrees
degrees
degrees
Adjustable;
90 to 160
degrees,
Symmetrical
Adjustable;
90 to 160
degrees,
Asymmetrical
Adjustable;
90 to 160
degrees,
Asymmetrical
Adjustable;
90 to 160
degrees,
Asymmetrical
Adjustable;
90 to 160
degrees,
Symmetrical
Fixed; 90
degrees,
Symmetrical
Internal
Transformerlb-in., lb Nm, N
Transformer
and Screw
Terminal
Adapter
Transformer
and Screw
Terminal
Adapter
Transformer
and Screw
Terminal
Adapter
— — None
Transformer
and Screw
Terminal
Adapter
Transformer Enhanced
— 50004263-
— 50004263-
— 50004263-
— 50004263-
models,
additional
repositions
002
002
002
002
50004263001
Page 2
Product Number
M7284C1091/U
M7284Q1009/U
M7284Q1082/U
M7284Q1090/U
M7284Q1098/U
M7284Q1106/U
M7285A1003/U
M7285A1045/U
M7285C1009/U
M7285Q1008/U
M7285Q1024/U
M7285Q1032/U
M7286G1009/U
Fail
Torque/Force
Safe
Mode
Non-
150 lb-in. 17 Nm 24/
Spring
Return
Non-
150 lb-in. 17 Nm 120V 30-60
Spring
Return
Non-
150 lb-in. 17 Nm 24/
Spring
Return
Non-
150 lb-in. 17 Nm 24/
Spring
Return
Non-
150 lb-in. 17 Nm 24V 30-53 Screw
Spring
Return
Non-
150 lb-in. 17 Nm 24V 30-60
Spring
Return
Spring
60 lb-in. 6.8 Nm 120V 30-60
Return
Spring
60 lb-in. 6.8 Nm 24V 30-60
Return
Spring
60 lb-in. 6.8 Nm 120V 30-60
Return
Spring
60 lb-in. 6.8 Nm 120V 30-60
Return
Spring
60 lb-in. 6.8 Nm 24 V 30/53 Screw
Return
Spring
60 lb-in. 6.8 Nm 24 V 30/53 Screw
Return
Spring
60 lb-in. 6.8 Nm 24V 30-60
Return
Vo lt ag e
120/
230V
120/
230V
120/
230V
Nominal
Timing
(sec)
60 sec Screw
sec
30 sec Screw
60 sec Screw
sec
sec
sec
sec
sec
sec
Electrical
Connections
terminals
Screw
terminals
terminals
terminals
terminals
Screw
terminals
Screw
terminals
Quickconnect
terminals
Screw
terminals
Screw
terminals
terminals
terminals
Quickconnect
terminals
Control
Signal
Modulating,
4-20 mA
Modulating,
4-20 mA
Modulating,
4-20 mA
Modulating,
4-20 mA
2 to 10 Vdc 2 160
Modulating,
4-20 mA
Modulating,
4-20 mA
Modulating,
2-10 Vdc
Modulating,
4-20 mA
Modulating,
4-20 mA
Modulating,
4-20 mA
Modulating,
2-10 Vdc
Modulating,
2-10 Vdc
Internal
Auxiliary
Switch
2 160
2 90
2 90
2 160
2 90
0 90
0 160
2 90
2 90
2 90
2 160
0 160
Factory
Stroke
Setting Stroke Includes Comments
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
degrees
Modutrol IV Motors
Internal
Transformerlb-in., lb Nm, N
Fixed; 160
degrees,
Asymmetrical
Adjustable;
90 to 160
degrees,
Symmetrical
Fixed; 90
degrees,
Symmetrical
Fixed; 160
degrees,
Asymmetrical
Adjustable;
90 to 160
degrees,
Asymmetrical
Adjustable;
90 to 160
degrees,
Symmetrical
Adjustable;
90 to 160
degrees,
Asymmetrical
Adjustable;
90 to 160
degrees,
Asymmetrical
Adjustable;
90 to 160
degrees,
Asymmetrical
Adjustable;
90 to 160
degrees,
Asymmetrical
Adjustable;
90 to 160
degrees,
Asymmetrical
Adjustable;
90 to 160
degrees,
Asymmetrical
Adjustable;
90 to 160
degrees,
Asymmetrical
Transformer Enhanced
Transformer
and Screw
Terminal
Adapter
Transformer Enhanced
Transformer Enhanced
— Enhanced
— Adjustable
Transformer
and Screw
Terminal
Adapter
— — None
Transformer
and Screw
Terminal
Adapter
Transformer
and Screw
Terminal
Adapter
Screw
Terminal
Adapter
Screw
Terminal
Adapter
— — None
models,
additional
repositions
Adjustable
zero and
span for split
range
applications
models,
additional
repositions
(160°)
Adjustable
zero and
span for split
range
applications
models,
additional
repositions
(160°)
Adjustable
zero and
span for split
range
applications
models,
additional
repositions;
Adjustable
zero and
span for split
range
applications
zero and
span for split
range
applications
— 50004263-
— 50004263-
Adjustable
zero and
span for split
range
applications
Adjustable
zero and
span for split
range
applications
Adjustable
zero and
span for split
range
applications
50004263001
50004263002
50004263006
50004263006
None
None
002
002
50004263002
None
None
Commercial
Components
70-6910 427
Page 3
Modutrol IV Motors
Fail
Torque/Force
Product Number
M7294A1010/U
M7294Q1007/U
M7294Q1015/U
Safe
Mode
Non-
300 lb-in. 34 Nm 24V 60-120
Spring
Return
Non-
300 lb-in. 34 Nm 120V 60-120
Spring
Return
Non-
300 lb-in. 34 Nm 24V 60/107 Screw
Spring
Return
M7685 Modutrol IV™ Series 2 Motor
Vo lt ag e
Nominal
Timing
(sec)
sec
sec
Electrical
Connections
Quickconnect
terminals
Screw
terminals
terminals
Control
Signal
Modulating,
2-10 Vdc
Modulating,
4-20 mA
Modulating,
4-20 mA
Internal
Auxiliary
Switch
0 160
2 90
2 90
Factory
Stroke
Setting Stroke Includes Comments
degrees
degrees
degrees
Adjustable;
90 to 160
degrees,
Asymmetrical
Adjustable;
90 to 160
degrees,
Symmetrical
Adjustable;
90 to 160
degrees,
Symmetrical
— — None
Transformer
and Screw
Terminal
Adapter
Screw
Terminal
Adapter
Adjustable
zero and
span for split
range
applications
Adjustable
zero and
span for split
range
applications
Internal
Transformerlb-in., lb Nm, N
50004263002
None
Proportional, spring-return motors for use with Honeywell W7080
panel 14-17 Vdc output; with minimum position adjustment.
• Integral spring return returns motor to normal position
in the event of power failure
• Integral junction box provides NEMA 3 weather protection
• Motor and circuitry operate from 24 Vac
• Quick-connect terminals are standard
• Adapter bracket for matching shaft height of older motors is available
• Motors have field adjustable stroke (90 deg. to 160 deg.)
• Integral auxiliary switches are available factory mounted,
or can be field added
• Spring return motors can operate valve linkages from power end or
auxiliary end shafts for normally closed or normally open valve applications
• All models have dual shafts (slotted and tapped on both ends)
• All models have auxiliary switch cams
• Fixed torque throughout the entire voltage range
Application Type: Electric
Dimensions, Approximate: 6 7/16 in. high x 5 1/2 in. wide x 8 3/4 in.
deep (164 mm high x 140 mm wide x 222 mm deep)
Fail Safe Mode: Spring Return
Control Signal: Modulating, 14-17 Vdc
Feedback: No
Frequency: 50 Hz; 60 Hz
External Auxiliary Switches Available: Ye s
Auxiliary Switch Ratings AFL - 120 Vac: 7.2A
Auxiliary Switch Ratings ALR - 120 Vac: 43.2A
Auxiliary Switch Ratings AFL - 240 Vac: 3.6A
Auxiliary Switch Ratings ALR - 240 Vac: 21.6A
Electrical Connections: Quick-connect terminals
Mounting: Foot-mounted
Motor Shafts: Dual-ended shaft
Shaft Shape: square
Shaft Dimensions: 0.375 in. (10 mm)
Shaft Rotation (upon control signal increase): Clockwise (as viewed
Deadweight Load on Shaft (Either End): 200 lbs.
Deadweight Load (Combined on both Shafts): 300 lbs.
Ambient Temperature Range: -40 F to +150 F (-40 C to +60 C)
Weight: 8.5 lb
Approvals
Underwriters Laboratories, Inc: Listed: File No. E4436, Guide No.
XAPX for USA and Canada
Accessories:
4074ERU-Weatherproofing kit. Protects motor from driving rain when
mounted in any position
220736A-Internal Auxiliary Switch Assembly - 1 Switch
220736B-Internal Auxiliary Switch Assembly - 2 Switches
220738A-Adapter Bracket. Adjusts shaft height to match Modutrol III motors
221455A-Infinitely adjustable Motor Crank Arm
50017460-001-24/120/230 Vac Internal Transformers for Series 2 and 3
Motors
50017460-003-120 Vac Internal Transformers for Series 2 and 3 Motors
from power end) (normally closed)
Torque/Force
Product Number
M7685A1025/U 60 lb-in. 6.8 Nm 24V 30-60 sec 0 90 degrees Adjustable; 90 to 160
Volt ag e
Nominal
Timing
(sec)
Internal
Auxiliary
Switch
Factory
Stroke
Setting Stroke Includes
degrees, Asymmetrical
Minimum Position
Potentiometer
Internal
Transformerlb-in., lb Nm, N
None
428 customer.honeywell.com 70-6910
Loading...