Honeywell HPA020 User Manual

TRUE HEPA
Air Purier
AIR PURIFIER
For HPA020 Model Series
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS AIR PURIFIER
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Read all instructions before operating the air
purifier.
2. Place air purifier where it is not easily knocked
over by persons in the household.
3. Always turn the air purifier controls to the
OFFposition and unplug from the wall outlet
when not in use.
4. To disconnect the air purifier, first turn the control
to the OFF position, grip the plug and pull it from the wall outlet when not in use.
NEVER pull by the cord.
5. DO NOT use any product with a damaged cord
or plug or if product malfunctions, is dropped or damaged in any manner. Keep the cord away from heated surfaces.
6. DO NOT use air purifier outdoors.
7. DO NOT use air purifier unless it is fully assembled.
8. DO NOT run power cord under carpets, and
DO NOT cover with throw rugs. Arrange cord such
that it will not be tripped over.
9. DO NOT use air purifier where combustible gases
or vapors are present.
10. DO NOT expose the air purifier to rain, or use near
water in a bathroom, laundry area or other damp location.
11. The air purifier must be used in its horizontal
position only.
12. DO NOT allow foreign objects to enter ventilation
or exhaust opening as this may cause electric shock or damage to the air purifier. DO NOT block air outlets or intakes.
13. Locate air purifier near the outlet and avoid using
an extension cord or power-strip.
14. This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
DONOTattempt to defeat this safety feature.
15. A loose fit between the ACoutlet (receptacle) and
plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.
16. DO NOT sit, stand or place heavy objects on the
air purifier.
17. Disconnect power supply before servicing.
18.
SAVE THESE INSTRUCTIONS
For FCC compliance information, please see last page of this manual.
WARNING: To Reduce The Risk of Fire or Electric Shock, Do Not Use This Air Purifier With Any SolidState Speed Control Device.
YOUR AIR PURIFIER
A
A
A
Bottom of air purifierTop of air purifier
DO NOT IMMERSE IN WATER!
Replace every 12 months
G
¡NO LO SUMERJA EN AGUA!
Substituya cada 12 meses
P/N A001610R0
www.replacementfilters.com • 1-800-477-0457
Control Panel
Odor Reducing PreFilter
True HEPA Filter
Odor Reducing PreFilter
HOW YOUR AIR PURIFIER WORKS
This model air purifier incorporates a 2-stage cleaning system to help clean the air that passes through the filter in the unit (Fig. 1).
Stage 1: Activated Carbon Pre-filter traps larger
particles and household odors*
Stage 2: HEPA Filter captures up to 99.97% of
microscopic particles, as small as .3 microns*
*
From the air that passes through the filter
This side in
Este lado adentro
&
A
2
STAGE 1
Odor Reducing Pre-filter
Clean Air is Released
Back into the Room
Air Intake
True HEPA Filter
STAGE 2
Filter
SETUP
• Select a firm, level and flat location on the floor at least 6 inches away from wall or furniture.
• When operating, large volumes of air are drawn toward the air purifier. Surrounding areas should be cleaned and/or vacuumed frequently to prevent build-up of dust and other contaminants. This may also help prolong the life of the filter. If the unit is placed on a light colored carpet, a small mat or rug should be used underneath to prevent staining. This is especially important in homes with contamination from smoking, fireplaces, or where candles are burned.
• Ensure the front of the unit faces away from the closest wall or furniture.
• Ensure no grilles are blocked.
2
Fig. 1
INSTALLING THE TRUE HEPA FILTER AND ODOR REDUCING PREFILTER
A
The True HEPA Filter and Odor Reducing Pre-filter are supplied with your air purifier. They are wrapped to ensure purity and are labeled to help identify the proper replacement filter (Type and Type
A
Odor Reducing Pre-filter).
True HEPA Filter
• Turn off and unplug the air purifier.
• Turn the air purifier upside down on a flat surface. The filter is visible from the bottom of the unit (Fig. 2).
• Remove the True HEPA filter by grasping the filter from the finger notches. There are small molded tabs that secure the filter in place and prevent it from slipping out of the unit. Pull away from tabs and up to remove. When removing a used filter that is not wrapped in plastic, pull the red tab to remove.
Molded tabs secure filter
• Remove the protective plastic wrap from the HEPA filter and pre­filter.
• Install the pre-filter first by sliding it in behind the front grille of the air purifier and securing it in the molded slots.
• Install the True HEPA filter by sliding it in the opening on bottom of the air purifier. Ensure that the red tab is accessible for easy removal.
OPERATION
• Ensure the air purifier is plugged into a working electrical outlet
Power ON LED
• Turn the Power Knob to desired setting (O = Off, III = High, II = Medium, I = Low)
Portable air purifiers are more effective in rooms
where all the doors and windows are closed. It is recommended that you run your air purifier while
Cleaning Levels
Power Control Knob
you are at home to help clean the air.
Fig. 2
Check Filter Indicator Light
FILTER RESET Button
Fig. 3
ENERGY STAR®
This product earned the ENERGY STAR® by meeting strict energy efficiency guidelines set by the U.S. EPA. The U.S. EPA does not endorse any manufacturer claims of healthier indoor air from the use of this product.
The energy efficiency of this ENERGY STAR® qualified model is measured based on a ratio between the model’s CADR for Dust and the electrical energy it consumes, or CADR/Watt.
3
A
A
ELECTRONIC FILTER CHECK REMINDER
This model has an electronic filter check to remind you when to check and replace your filters based on the air purifier’s hours of use. A red LED will illuminate when it is time to check/replace your filters.
When the HEPA filter or pre-filter needs to be replaced, the light will remain on until it is RESET. You may unplug the air purifier without interrupting the filter check.
Fig. 4
Check Filter Indicator Light
You should periodically check the filters depending on operating conditions, the TRUE HEPA filter should be replaced every 12 months and the pre-filter every 3 months.
REPLACE WITH TRUE HEPA FILTER
and ODOR REDUCING PREFILTER
To RESET the Electronic Filter Check:
When the filter check light remains on and solid, it is time to replace the Odor Reducing Pre-filter and reset the filter monitor. With the unit powered ON, press the FILTER RESET button next to the Check Filter LED and hold for approximately 2 seconds until the light turns off (Fig. 4).
When the LED illuminates and is flashing, it is time to replace the True HEPA filter and reset the filter monitor. With the unit powered ON, press FILTER RESET button and hold for approximately 2 seconds until the light turns OFF (Fig. 4).
Manual (or Early) Reset of Electronic Filter Check
Depending on your individual usage (environment and hours used), you may need to replace the filters more or less frequently. Each time you replace your filters, you should reset the filter monitor. You may manually reset the filter monitor for the pre-filter or the HEPA filter, or both. If you change the pre-filter or True HEPA filter before the Check Filter LED is illuminated, it is possible to reset the filter monitor. You must first manually illuminate the Check Filter LED. Follow these steps:
1. With unit powered ON, press the FILTER RESET button for 5 seconds to illuminate the LED in “solid” mode.
2. To reset filter monitor for pre-filter: press and hold FILTER RESET button for 2 seconds until LED changes to
flashing mode.
3. TAP FILTER RESET button to shut LED off. The pre-filter monitor is now set to “clean status”.
4. To reset filter monitor for HEPA filter: LED must be in “flashing mode”. Follow Step 1 above, then TAP FILTER
RESET button again to illuminate the LED in “flashing mode”.
5. Press and hold FILTER RESET button for 2 seconds until LED shuts off. The HEPA filter monitor is now set to “clean status”.
6. To reset filter monitor for both pre-filter and HEPA filter: Follow Steps 1,2, and 5 above.
CLEANING AND STORAGE
We recommend that you clean the air purifier at least once every 3 months and before extended storage. Use only a dry cloth to wipe the external surfaces of the air purifier.
DO NOT USE WATER, WAX POLISH, OR ANY CHEMICAL SOLUTION.
If your Air Purifier will not be used for more than 30 days, we recommend that you:
• Remove the True HEPA filter and the Odor Reducing Pre-filter from the unit.
• Place each filter in separate airtight plastic bags to preserve freshness.
4
ACCESSORIES AND REPLACEMENT FILTER
A
A
A
You may purchase Honeywell replacement True HEPA filter
and Honeywell Odor Reducing Pre-filter
A
at
the store where you purchased your air purifier or, order directly from www.replacementfilters.com. To ensure stated product performance, use only Genuine Honeywell Replacement Filters. You have the option to use the Honeywell Household Gas & Odor Reducing Pre-filter A instead of the Odor Reducing
Pre-filter. It is also
available at many retailers and on www.replacementfilters.com. If you have any questions, please calll 18004770457 or email consumerrelations@kaz.com.
FREQUENTLY ASKED QUESTIONS
My Air Purifier is starting to make noise and the air output is less. What’s wrong?
The filters may be dirty. High amounts of contaminants can block the pores in the filter and stop the air from moving through it. Replace the filters.
How long should I run my Air Purifier?
The unit will be most effective when doors and windows are closed. It is recommended that you run your air purifier while you are at home to help clean the air. If desired or conditions warrant, you may run your air purifier 24 hours a day.
Can I wash any of the filters in my Air Purifier?
No. Washing any of the filters will ruin them.
When should I replace my filters?
You should periodically check the filters depending on operating conditions, the TRUE HEPA filter should be replaced every 12 months and the pre-filter every 3 months.
CONSUMER RELATIONS
We are here to help. Call us toll-free at: 18004770457 E-mail: consumerrelations@kaz.com Or visit our website at: www.HoneywellPluggedIn.com
Please be sure to specify the model number. NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACTCONSUMERRELATIONSFIRST OR SEE YOUR
WARRANTY. DO NOT RETURN TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE AIRPURIFIER ORPERSONALINJURY.
5 YEAR LIMITED WARRANTY
You should first read all instructions before attempting to use this product.
A. This 5 year limited warranty applies to repair or
replacement of product found to be defective in material or workmanship. This warranty does not apply to damage resulting from commercial, abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear and tear will not be considered manufacturing defects under this warranty. KAZ IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY NATURE, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some jurisdictions
do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long
an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights which vary from jurisdiction to jurisdiction. This warranty applies only to the original purchaser of this product from the original date of purchase.
B. At its option, Kaz will repair or replace this product if it is
found to be defective in material or workmanship.
C. This warranty does not cover damage resulting from
any unauthorized attempts to repair or from any use not in accordance with the instruction manual.
D. This warranty does not cover the True HEPA filters or
pre-filters except for material or workmanship defects.
5
6
Loading...
+ 14 hidden pages