Honeywell HD73P, HD70P, HD70PX, HD73PX User Manual

P/N 800-07007-A 04/11

USER INFORMATION

CONTENTS

IR DOME CAMERA

Need Help?

Call 1.800.796.CCTV for sales, service and customer support.

www.honeywellvideo.com

WEEE (Waste Electrical and Electronic Equipment).

Correct disposal of this product (applicable in the European Union and other European countries with separate collection systems). This product should be disposed of, at the end of its useful life, as per applicable local laws, regulations, and procedures.

Operation Manual

IR DOME CAMERA

HD70(73)P/PX

READ AND KEEP THIS OPERATION MANUAL

Directive GPSD 2001/95/EC, conforming to the requirements of standards EN 55022 for emissions , EN 50130-4 for immunity, and EN 60950 for Electrical Equipment safety.

800-07007-A 04/11

General Product Safety

series

CAUTION ! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating instructions in the literature accompanying the appliance.

1. SAFETY INSTRUCTIONS

Read Instructions

Read all of the safety and operating instructions before using the product.

Retain Instructions

Save these instructions for later use.

Cleaning

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Power source

This product should be operated only from a 12V DC power source as indicated on the marking label.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

Thank you for purchasing this COLOR VIDEO CAMERA.

Before using this camera, please read this operation manual carefully

to obtain the best result and keep this manual for future reference.

1. SAFETY INSTRUCTIONS

2. PRECAUTIONS

3. FEATURES

4. SUPPLIED ACCESSORIES

5. INSTALLATION

6. NAME AND FUNCTIONS

7. CONNECTIONS

8. OPERATING CAMERA

9. SPECIFICATION

10. TROUBLESHOOTING

2. PRECAUTIONS

Do not install the camera in extreme temperature conditions.

Operate the camera under conditions where temperatures are within l• š œ ™ Œ G› • Œ ™ Œ G • š G Œ • – œ Ž • G •Œ • › • “ ˆ › • – • G • • G• • Ž • G › Œ ” — Œ ™ ˆ › œ ™ Œ G Œ • •• ™– • ” Œ • › š U

Do not disassemble the camera.

{ • Œ ™ Œ G ˆ ™ Œ G• – Gœ š Œ ™ G ™ Œ — ˆ • ™ ˆ ‰ “ Œ G — ˆ ™ › š G • • š • ‹ Œ U

Do not drop the camera or subject them to physical shocks.

p› G Š ˆ • G Š ˆ œ š Œ G ” ˆ “ • œ • Š › • – • š G › – G – Š Š œ ™ U

Never keep the camera face to strong light directly.

p› G Š ˆ • G ‹ ˆ ” ˆ Ž Œ Gj j k U

When this camera is installed near wireless communication devices

NOTE

that emit strong electromagnetic field, irregularity such as noise on the monitor may appear.

6 7 8

9 10 11 13 14 32 34

R X [ ¶ mG › – G R X Y Y ¶ mG OTX W ¶ j G › – G R \ W ¶ j P U G

3. FEATURES

Adaptive IR Technology

"Adaptive IR" technology dramatically eliminates the white out effect and saturation on close objects, producing a clear and recognizable image regardless of viewing condition or location of objects.

1/3” High Sensitivity CCD

HD70P(PX)

Min Illumination (F2.0, 50 IRE, AGC Max)

- 0.3 LUX (Color, B/W)

- 0 LUX (IR LED ON)

User-friendly menus

- Ultra High Resolution (600 TVL)

- SBLC (Super Back Light Compensation)

- DNR (Digital Noise Reduction)

- Privacy zone selectable

- Mirror (Horizontal)

- Flickerless On/Off

Breather vent

HD73P(PX)

Min Illumination (F1.4, 50 IRE, AGC Max)

- 0.3 LUX (Color)

- 0 LUX (IR LED ON)

4. SUPPLIED ACCESSORIES

Service Monitor Cable

Owner’s Manual

Mounting Screw

Guide Pattern

DC Plug Cable

L-Wrench

7. CONNECTIONS

Vari-focal Lens Type

HD73P(PX) shown

Camera Layout

Tilt rotation : Adjusting the vertical angle.

Pan rotation : Adjusting the horizontal angle.

Horizontal rotation : Adjusting the horizontal

position of the screen. Focus handle : Focus (Far or Near)

Zoom handle : Zoom (Tele or Wide)

1. Connecting to Monitor and Power

- Connect the video-out jack to the video-in jack of monitor.

- Connect the power adapter to the power input connecter.

- Use 12V DC power source.

- Use the power rated at least 400 mA (12V DC)

#1 #2

Function

Video Output

Power Input

Terminal Color Remark

Yellow

Red

12V DC (±10%), Max 4.8 W / 400 mA

1.0 Vp.p

Video Output

GND

1312

5. INSTALLATION

Stick the guide pattern on the wall or ceiling and mark

the mounting holes.

Drill four holes according to the guide pattern, then insert

anchors into the drilled holes.

Draw out power/video wires and make the connections.

Attach the camera base to the ceiling or wall using

the supplied four screws.

Aim and focus by turning and moving the 3-axis camera

bracket by hand.

Align the dome cover over the base.

Secure the dome cover to the base using the supplied

L-wrench.

Ceiling

GUIDE PATTERN

Dome Cover

L-Wrench

Guide Pattern

Rubber

Dome Base

Mounting Screw

6. NAME AND FUNCTIONS

Fixed Lens Type

HD70P(PX) shown

8. OPERATING CAMERA

ESC

LENS

WHITE BAL

Camera Layout

Tilt rotation : Adjusting the vertical angle.

Pan rotation : Adjusting the horizontal angle.

Horizontal rotation : Adjusting the horizontal

position of the screen.

AGC

DAY / NIGHT

IMAGE ADJ

ATW

MANUAL

PUSH

OFF

IRED

COLOR

B/W

SBLC

DNR

SHARPNESS

MIRROR

MOTION

(NTSC/PAL)

BRIGHTNESS

DC LEVEL

SHUTTER

RED

BLUE

LEVEL

MODE

CHANGE LEVEL

BURST

LEVEL

OFF, ON

AREA

DISPLAY

SENSITIVITY

TOP

BOTTOM

LEFT RIGHT INITIAL

RETURN

1/60(1/50),1/120(1/100),1/250,1/500,1/700,1/1K,1/1600,1/2500

1/5K,1/7K,1/10K,1/30K,1/60K,1/120K

0~5 0~5

IR MODE:1/60(1/50)

0~160 0~160

0~20 (IR MODE:FIXED)

WIDE, SMART

LOW, MIDDLE, HIGH

ON/OFF OFF, LOW, MIDDLE, HIGH OFF, LOW, MIDDLE, HIGH

0~20

1~4

OFF, ON

1~24

8~126 / 10~146 8~126 / 11~149

4~191 / 8~191 4~191 / 9~192

OFF , ON

IMAGE ADJ

GENERAL

INITIAL

RETURN

PRIVACY

(NTSC/PAL)

COLOR GAIN

INITIAL

RETURN

CAM TITLE

LANGUAGE

VERSION

INITIAL

RETURN

AREA

DISPLAY

COLOR

TOP

BOTTOM

LEFT

RIGHT

INITIAL

RETURN

R-Y B-Y

OFF

1~4

WHITE, YELLOW, GREEN, BLUE, RED, BLACK, GRAY

OFF, ON

4~63 / 6~74

5~64 / 7~75 18~205 / 22~206 19~206 / 23~207

OFF , ON

0~20 0~20

OFF , ON

UP/DN, LE/RI

ENG

OFF , ON

Use the joystick to navigate through the menus.

DOWN : Move down / UP : Move up

LEFT : Move left RIGHT : Move right

d e

MENU(SET): Press the joystick in its straight position. Sevice Monitor Connecter :

Use service monitor connector to set camera angle & focus when installing.

MAIN MENU - GENERAL

Press MENU button to access the SETUP menu.

Select each sub-menu by using the , , , button. Press the MENU(SET) button to select.

LENS WHITE BAL AGC DAY/NIGHT IMAGE ADJ GENERAL INITIAL EXIT

If the OSD MENU is changed then INITIAL will be OFF (EXCEPT : LENS)

ESC ATW ON IRED

(

LENS DC

HD73P(PX

Select DC and press the MENU button to have LENS DC activated .

1. DC LEVEL (Adjusts brightness of the image.)

- Select DC LEVEL using the UP or DOWN button. You can adjust between 0 to 20 level using the LEFT or RIGHT button.

2. FLK (FLICKERLESS)

- Select FLK using the UP or DOWN button. You can select between ON / OFF using the LEFT or RIGHT button. > OFF : You will be allowed to adjust the shutter speed.

3. SHUTTER (Adjusts the shutter speed of the lens.)

- IR LED Mode : 1/60(1/50)

- COLOR, B/W Mode : Select SHUTTER using the UP or DOWN button. You can adjust from 1/60(1/50), 1/120(1/100), 1/250, 1/500, 1/700, 1/1K, 1/1600, 1/2500, 1/5K, 1/7K, 1/10K, 1/30K, 1/60K, 1/120K(sec) level using the LEFT or RIGHT button.

))

DC LEVEL FLK SHUTTER

LENS DC

OFF 1/60(50)

EXIT - MENU

LENS

Press the MENU button to access the SETUP menu.

(

LENS ESC

- Select LENS using the UP or DOWN button. You can change between ESC and DC using the LEFT or RIGHT button.

Select ESC and press MENU button to display LENS ESC.

1. BRIGHTNESS

- Select BRIGHTNESS using the UP or DOWN button. You can adjust between 0 to 5 using the LEFT or RIGHT button.

HD73P(PX

))

BRIGHTNESS

LENS WHITE BAL AGC DAY/NIGHT IMAGE ADJ GENERAL INITIAL EXIT

LENS ESC

EXIT - MENU

ESC ATW ON IRED

WHITE BAL (White Balance)

Select WHITE BAL using the UP or DOWN button. You can select from ATW, MANUAL, PUSH using the LEFT or RIGHT button.

1. ATW : Color temperature is automatically adjusted for light sources in the 2,000ºK to 10,000ºK range

2. MANUAL : To adjust the white balance manually

Select MANUAL using the UP or DOWN button and press the MENU button to activate WB MANUAL

option.

WB MANUAL

RED BLUE

EXIT - MENU

1. RED : To adjust density of RED (0 to160)

2. BLUE : To adjust density of BLUE ( 0 to 160)

3. PUSH : place a white surface (such as a piece of paper) in front of the camera during adjustment.

Push Lock mode fixes the white balance based on current lighting. For best results,

AGC (Automatic Gain Contr ol )

Select AGC using the UP or DO WN b utton. You can select between OFF, ON using the LEFT or RIGHT button. AGC is fixed at a certain level in IR LED mode. AGC level is selectable in COLOR, B/W mode.

1. ON : Select ON using the LEFT or RIGHT button and press the MENU button to activate

the AGC option.

AGC

LEVEL

EXIT - MENU

1. LEVEL : You can adjust between 0 to 20 using the LEFT or RIGHT button.

2. OFF : Disable the AGC

IMAGE ADJ (Image Adjust)

Select IMAGE ADJ using the UP or DO WN button and press the MENU button to activate the IMAGE ADJ mode.

1. SBLC (Super Back Light Compensation) : To lighten a darker part of the image

- Select SBLC using the UP or DOWN button. You can select between OFF, LOW, MIDDLE, HIGH using the LEFT or RIGHT button.

- SBLC turns to OFF automatically at night.

2. DNR (Digital Noise Reduction) : To reduce the image noise especially during low ambient lighting conditions.

Select DNR using the UP or DOWN button. You can adjust between OFF, LOW, MIDDLE, HIGH

using the LEFT or RIGHT button.

SBLC DNR SHARPNESS MIRROR MOTION PRIVACY COLOR GAIN INITIAL RETURN

IMAGE ADJ

OFF LOW

OFF

DAY / NIGHT

Select DAY / NIGHT using the UP or DOWN button. Y ou can select between IRED , COLOR, B/W using the LEFT or RIGHT button.

1. COLOR : for color mode only (DAY mode)

2. B/W : for BLACK and WHITE mode only (NIGHT mode)

- Select B/W using the LEFT or RIGHT button and press the MENU button to activate COLOR BURST option.

3. IRED : IR LED control mode WIDE : LED control based on full screen exposure.

Some areas may be over exposed. SMART :

3. SHARPNESS :

- Select SHARPNESS using the UP or DOWN button.

SHARPNESS option.

LEFT or RIGHT button.

4. MIRROR

- Select MIRROR using the UP or DOWN button. You can select from ON/OFF using the LEFT or RIGHT button. (1) ON : Horizontal image flip. (2) OFF : default

5. MOTION (Motion Detect)

- Select MOTION using the UP or DOWN button and press MENU button to activate the MOTION DETECT option.

LED output is limited to optimized scene exposure.

To adjust SHARPNESS of the image.

Select and press the MENU button to activate

You can adjust the sharpness from 0 to 20 using the

Display only (No output signal)

COLOR BURST

BURST

EXIT - MENU

It is possible to select ON/OFF using the LEFT or RIGHT button.

IR LED

MODE

EXIT_MENU

SHARPNESS

LEVEL

EXIT - MENU

MOTION

AREA DISPLAY SENSITIVITY TOP BOTTOM LEFT RIGHT INITIAL RETURN

WIDE

MIDDLECHANGE LEVEL

NTSC(PAL)

1 OFF 5 19 (27) 62 (75) 13 (25) 89 (95) ON

2322

1) AREA : To specify MOTION DETECTION area

- Select AREA using the UP or DOWN button. You can select from area 1 to 4 position using the LEFT or RIGHT button.

2) DISPLAY : To display MOTION DETECTED area on the video

- Select DISPLAY using the UP or DOWN button. You can select between ON/OFF using the LEFT or RIGHT button. (1) ON : display the MOTION DETECTED area on the screen (2) OFF : disable

3) SENSITIVITY : To set up the motion sensitivity

- Select SENSITIVITY using the UP or DOWN button. You can adjust the motion sensitivity of a movement from 1 to 24 using the LEFT or RIGHT button. (1) 1 : most sensitive (highest) (2) 24 : least sensitive (lowest)

6. PRIVACY

- Select PRIVACY using the UP or DOWN button and press the MENU button to active the PRIVACY option.

1) AREA : To specify the PRIVACY area

- Select AREA using the UP or DOWN button. You can select area from 1 to 4 position using the LEFT or RIGHT button.

2) DISPLAY : To display the Privacy Zone area

- Select DISPLAY using the UP or DOWN button. You can select between ON/OFF using the LEFT or RIGHT button. (1) ON : display the Privacy Zone area (2) OFF : disable

3) COLOR : To change the color of the privacy zone

- Select COLOR using the UP or DOWN button. You can adjust from WHITE, YELLOW, GREEN, BLUE, RED, BLACK, or GRAY using the LEFT or RIGHT button.

AREA DISPLAY COLOR TOP BOTTOM LEFT RIGHT INITIAL RETURN

PRIVACY

1 2 3 4

NTSC(PAL)

1 OFF WHITE 15 (16) 31 (38) 44 (44) 104 ON

4) TOP / BOTTOM / LEFT / RIGHT : Users can specify MOTION DETECTED area.

- Select TOP, BOTTOM, LEFT, or RIGHT using the UP or DOWN button. You can adjust the AREA using the LEFT or RIGHT button.

(NTSC/PAL)

(1) TOP : extend or reduce the upper area of the MOTION DETECTED area (8 to 126 / 10 to 146) (2) BOTTOM : extend or reduce the bottom area of the MOTION DETECTED area (8 to126 / 11 to 149) (3) LEFT : extend or reduce the left side of the MOTION DETECTED area (4 to 191 / 8 to191) (4) RIGHT : extend or reduce the right side of the MOTION DETECTED area (4 to 191 / 9 to 192)

TOP

LEFT RIGHT

5) INITIAL : To reset the MOTION DETECT mode.

- Select INITIAL using the UP or DOWN button. You can reset the MOTION DETECT mode using the MENU button.

6) RETURN :To return to IMAGE ADJ MENU

Select RETURN using the UP or DOWN button. You can return to IMAGE ADJ MENU using

the MENU button.

4) TOP / BOTTOM / LEFT / RIGHT : Users can specify a PRIVACY ZONE area

- Select TOP, BOTTOM, LEFT, or RIGHT using the UP or DOWN button. You can adjust the privacy zone using the LEFT or RIGHT button.

(NTSC/PAL)

(1) TOP : extend or reduce the upper area of the PRIVACY area (4 to 63 / 6 to 74) (2) BOTTOM : extend or reduce the bottom area of the PRIVACY area (5 to 64 / 7 to 75) (3) LEFT : extend or reduce the left side of the PRIVACY area (18 to 205 / 22 to 206) (4) RIGHT : extend or reduce the right side of the PRIVACY area (19 to 206 / 23 to 207)

LEFT RIGHT

5) INITIAL : To reset to factory default only on the PRIVACY mode.

- Select INITIAL using the UP or DOWN button. You can reset the PRIVACY mode using the MENU button.

6) RETURN :To return to IMAGE ADJ MENU

- Select RETURN using the UP or DOWN button. You can return to IMAGE ADJ MENU using the MENU button.

BOTTOM

TOP

BOTTOM

reduce extend

RIGHT

reduce extend

RIGHT

7. COLOR GAIN

- Select COLOR GAIN using the UP or DOWN button and then press the MENU button to activate the COLOR MODE

option.

8. INITIAL

To reset to factory default only on the IMAGE ADJ mode.

- Select INITIAL using the UP or DOWN button and reset the IMAGE ADJ mode using the MENU button.

9. RETURN

To return to MAIN MENU

- Select RETURN using the UP or DOWN button and return to MENU using the MENU button.

1. R-Y : To adjust density of RED (0 to 20)

2. B-Y : To adjust density of BLUE (0 to 20)

COLOR GAIN

R-Y B-Y

EXIT - MENU

2. LANGUAGE - English LANGUAGE.

3. VERSION

4. INITIAL : To reset to factory default only on the GENERAL mode.

- Select INITIAL using the UP or DOWN button.

You can reset to factory default for GENERAL mode using the MENU button.

5. RETURN

Select RETURN using the UP or DOWN button. You can return to the MENU using the MENU button.

- Displays the firmware version.

: To return to MENU

GENERAL

Select GENERAL using the UP or DOWN button and press the MENU button to activate the GENERAL mode.

1. CAM TITLE

- Select CAM TITLE using the UP or DOWN button.

You can adjust ON/OFF using the LEFT or RIGHT button. (1) ON : To display the camera title on the screen (2) OFF : disable

GENERAL

CAM TITLE LANGUAGE VERSION INITIAL RETURN

CAM TITLE

UP/DN - CHAR SELECT LE/RI - POSITION

EXIT - MENU

OFF ENG

- Select ON and Press MENU button to display CAM TITLE. (1) UP/DN : To select character using the UP or DOWN button (0 to 9,A to Z) (2) LE/RI : To select position using the LEFT or RIGHT button.

: To reset to factory default.

INITIAL

- Select INITIAL using the UP or DOWN button and reset to factory default using the MENU button.

: To exit the OSD setup menu.

EXIT

- Select EXIT using the UP or DOWN button and close the OSD setup menu by pressing the MENU button.

9. SPECIFICATION

MODEL

Signal System

Image Sensor

Effective Pixels

Video Output

Sync. System

S/N Ratio

Horizontal Resolution

Min Illumination

HD70P/PX HD73P/PX

ESC

Manual Shutter

DNR

White Balance

10. TROUBLESHOO TING

HIGH RESOLUTION

NTSC PAL

1/3” High Sensitivity CCD

768(H)x494(V) 752(H)x582(V)

Composite : 1.0V p-p, 75 Ohms

Internal Sync

50 dB Min. (SHARPNESS, A GC off)

600 TV Lines

0.3 Lux (Color, B/W) / 0 Lux (IR LED ON)

0.3 Lux (Color) / 0 Lux (IR LED ON)

PAL - 1/ 50 ~1/ 120,0001/ 60 ~ 1/ 120,000

1/ 60(1/50), 1/120(1/100), 1/ 250, 1/ 500, 1/ 700, 1/ 1K,

1/ 1.6K, 1/ 2.5K, 1/ 5K, 1/ 7K, 1/ 10K, 1/ 30K, 1/ 60K, 1/ 120K

OFF, LOW, MIDDLE, HIGH

ATW, MANUAL, PUSH

SBLC

AGC

Day / Night

Burst

Motion Detection

Privacy

Mirror

Sharpness

OSD Language

Applicable Lens

Supply Volta ge

Power Consumption

Operating Temperature/ Humidity

Storage Temperature/ Humidity

MEMO

OFF, LOW, MIDDLE, HIGH

ON, OFF

IRED, COLOR, B/W

ON, OFF

ON, OFF (4 Programmable Zone)

ON (HORIZONTAL), OFF

1 ~ 20

English

DC lris / Manual Lens

12V DC (±10%)

400 mA / 4.8 W (Max)

+14°F to +122°F (-10°C to +50°C) / 30% to 80% RH

-4°F to +140°F (-20°C to +60°C) / 20% to 90% RH

If you have trouble operating your camera, refer to the following guidelines. If the guidelines do not help you to solve the problem, contact an authorized technician.

Nothing appears on the screen

Check that the power cord and the video cable between the camera and monitor are properly connected. Check that you have properly connected the VIDEO cable to the camera VIDEO output jack.

The image on the screen is dim

If the lens is obstructed (for example, with dirt), clean the lens with a soft, clean cloth. Set the monitor to proper condition. If the camera is exposed to too strong light, change the camera position. Adjust the lens’ focus properly.

The image on the screen is dark

Adjust the contrast feature of the monitor. If you loop through an intermediate device, set the termination (75 Ohms / Hi-Z) properly.

Design and specications are

subject to change without notice.