Honeywell HD61 User Manual

Design and specifications are subject to change without notice.

P/N:3810-0148B

Rev 0 07/04

Menu [SHUTTER] -

SHUTTER AUTO

Menu [SHUTTER] - FIXED Mode Setup

Menu [FUNCTION] -

MOTION AREA 2

Main Menu -

ADJUST

Need Help?

Call 1.800.796.CCTV for sales, service and customer support.

www.honeywellvideo.com

3-Axis

. User Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION!

Explanation of two Symbols

THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON THE BOTTOM OF THE SYSTEM. "WARNING-TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE"

COLOR DOME CAMERA

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P AR TS INSIDE. REFER SER VICING T O QUALIFIED SER VICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance.

HD61

Series

Operation Manual

Color Dome Camera

READ AND KEEP THIS OPERATION MANUAL

INFORMATION

This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

WARNING

The manufacturer could void the user's authority to operate the equipment.

CAUTION - To prevent electric shock and risk of fire hazards:

Do NOT use power sources except for that specified. Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and should abide to all local codes.

www.honeywellvideo.com

COLOR DOME CAMERA

1) SHUTTER setup (for LENS MANUAL)

①

󰼿Press LEFT or RIGHT button in SHUTTER

to select the mode to AUTO ↙ ◀ ▶ FLK ◀ ▶ FIXED ◀ ▶MANUAL ↙.

Setting Mode : AUTO

16 17

COLOR DOME CAMERA

Menu [WHITE BAL.] -

WHITE BALANCE Mode Setup

1) WHITE BALANCE setup

①

󰼿In WHITE BAL., press LEFT, RIGHT button

to select the mode you wish to operate ATW ◀ ▶ AWB ◀ ▶ FIXED ◀ ▶MANUAL ↙.

2) FIXED ↙ setup

①

󰼿Can set from MODE 1 to MODE 4.

3) MANUAL ↙ setup

①

󰼿As shown on the lower right picture,

set Red and Blue color value temperature.

②

󰼿Press MENU button in RETURN

to exit from setup mode.

COLOR DOME CAMERA

↙󰼿

↙

↙󰼿

SHUTTER AUTO

BRIGHTNESS

↙󰼿:󰼿RETURN

AWB FIXED

AWB FIXED : MODE 1

↙󰼿:󰼿RETURN

AWB MANUAL

RED

BLUE

↙󰼿:󰼿RETURN

056

113

255

1) FIXED ↙ setup

①

󰼿Press MENU button in FIXED

to display the screen on the right side.

②

󰼿Press LEFT or RIGHT button in SHUTTER.

Can be set in ([NTSC: 1/60 ~ 1/100,000] [PAL: 1/50 ~ 1/100,000]) range.

↙

1) FUNCTION ↙ setup

①

󰼿Press MENU button in FUNTION

to show the OSD display on the right.

2) Select item using UP, DOWN button.

3) Set details using LEFT, RIGHT button.

4) Click "Return" to go to MAIN SETUP

SHUTTER FIXED

SHUTTER M : 1/60

↙󰼿:󰼿RETURN

Main Menu -

FUNCTION

BLC AGC DAY NIGHT PRIVACY MIRROR GAMMA MOTION RETURN

FUNCTION

OFF ON ↙ AUTO ↙ OFF OFF

0.45 OFF

1918

COLOR DOME CAMERA

1) MOTION OSD description

①

②

③

④

COLOR DOME CAMERA

Main Menu -

1) LANGUAGE setup

①

②

change setting using LEFT or RIGHT button.

③

wish to operate in.

COLOR DOME CAMERA

󰼿ALL CLEAR - Release all set AREA

󰼿ALL SET - Set all 64 MOTION AREA.

󰼿RETURN - Return to MOTION AREA Setup Mode.

󰼿EXIT - Save AREA and return to MOTION SETUP MODE.

LANGUAGE

󰼿DEFAULT value - ENGLISH

󰼿After selecting LANGUAGE,

󰼿Choose the language mode you

ENGLISH ◀ ▶ Korean ◀ ▶ Chinese1 ◀ ▶󰼿Chinese 2 ◀ ▶ Japanese

SETUP

CAMERA ID SHUTTER WHITE BAL. FUNCTION ADJUST

LANGUAGE

RESET EXIT

OFF AUTO ↙ ATW

↙ ↙

ENGLISH

↙

1) ADJUST setup

①

󰼿Press MENU button in ADJUST.

②

󰼿Move to screen on the right side.

Each LEVEL value can be adjusted using LEFT, RIGHT button.

2) CONTRAST setup

①

󰼿Adjust Y-gain value (0~255)

3) SHARPNESS setup

①

󰼿Adjust aperture value (0~31)

4) CB_GAIN setup

①

󰼿Adjust COLOR CB_GAIN value (0~255)

5) CR_GAIN setup

①

󰼿Adjust COLOR CR_GAIN value (0~255)

1) RESET

①

󰼿Select RESET.

Press MENU button. The screen on the bottom appears.

②

󰼿Select YES or NO.

③

󰼿Select YES to reset your camera

to default factory condition

ADJUST

CONTRAST

SHARPNESS

CB_GAIN

RETURN

Main Menu -

SETUP

CAMERA ID SHUTTER WHITE BAL. FUNCTION ADJUST LANGUAGE

RESET

EXIT

LOAD DEFAULT

RESET

YES

083

190

205

OFF AUTO ↙ ATW

↙ ↙

ENGLISH

↙

3332

3534

COLOR DOME CAMERA

3-Axis

. Contents

Thank you for purchasing this COLOR VIDEO CAMERA.

Before using this camera, please read this operation manual carefully to obtain the best result and keep this manual for future reference.

3-Axis

Read Instructions

Read all of the safety and operating instructions before using the product.

Retain Instructions

1. SAFETY INSTRUCTIONS

2. PRECAUTIONS

3. FEATURES

4. COMPOSITION

5. INSTALLATION

COLOR DOME CAMERA

3-Axis

...........

..........................

................................

..........................

2. PRECAUTIONS

6. CONNECTIONS

7. NAME AND FUNCTIONS

8. OPERATING CAMERA

9. SPECIFICATIONS

10. TROUBLESHOOTING

........................

...........

...............

......................

...............

3-Axis

Save this instructions for later use.

Cleaning

Unplug this appliance from wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Water and Moisture.

Do not use this product near water or moisture. (For example. near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool,etc)

Handling

Do not disassemble the camera and never touch parts inside the camera.

Do not drop the camera or subject it to shocks and vibrations to avoid possible damage.

When attaching or removing the lens, handle with care in order to that moisture and dust do not enter the camera.

Installation and storage

Do not point the camera at the sun. This could damage the camera whether it is operating or not.

Do not install the camera where the temperature

6 7

COLOR DOME CAMERA

could exceed the allowable range.

Be sure the ambient temperature is less than 40℃ in installation intended for long term continuous operation.

Avoid installing in a humid or dusty place.

Avoid installing in places where there are strong magnetic fields and electric signals.

Avoid installing in places where the camera would be subject to strong vibrations.

Never expose the camera to rain and water.

1. SAFETY INSTRUCTIONS

Installation

Do not place this product on an unstable cart, stand, or table. The product may fall causing serious injury to a child or adult, and damage to the product. Use only with a cart or stand recommended by the manufacturer, or sold with the product. Mounting should follow the manufacturer's instructions, and should use a mounting accessory recommended by manufacturer.

Power source

This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

3. FEATURES

High Sensitivity 1/3 Inch Sony Super HAD CCD

Min. Illumination (F1.2, 30 IRE) : 0.1 Lux (Color)

0.0 Lux (IR LED On)

Day & Night (Programmable)

OSD (On Screen Display)

High Performance Menus For Functions

• Privacy Zone Selectable (4 Programmable Zone)

• Motion Detection Selectable (64 Programmable Zone)

• Sharpness Enhanced Adjustable

• Flickerless Selectable

• Gamma Enhanced Selectable

• BLC Zone Selectable (64 Programmable Zone)

COLOR DOME CAMERA

Menu [FUNCTION] -

BLC 1

1) BLC SETUP MODE

①

󰼿Press MENU button in BLC ON ↙ ,

to display the screen on the right side.

2) BLC AREA ↙ setup

①

󰼿Use UP, DOWN, LEFT, RIGHT button

to move the AREA setup position.

②

󰼿Set or release BLC AREA

using MENU button.

③

󰼿Press MENU button for more than 1 second

to move to BLC AREA MODE.

COLOR DOME CAMERA

Menu [FUNCTION] -

BLC 3

1) BLC RATIO setup (BLC LEVEL value setup)

①

󰼿Use UP, DOWN button

to move to BLC RATIO.

②

󰼿Use LEFT, RIGHT button

to change BLC LEVEL value (0~63) 0:MIN , 63:MAX

③

󰼿Press MENU button in RETURN

to move to FUNCTION MODE.

COLOR DOME CAMERA

BLC SETUP

BLC AREA ↙

BLC RATIO

RETURN

BLC SETUP

BLC AREA ↙

BLC RATIO

RETURN

Menu [FUNCTION] -

BLC 2

3-Axis

1) BLC AREA MODE

①

󰼿Exit from BLC AREA MODE

to move to BLC SETUP MODE screen.

2) BLC OSD description

①

󰼿ALL CLEAR - Clear all set AREA

②

󰼿ALL SET - Set all 64 BLC AREA

③

󰼿RETURN - Return to BLC AREA setup mode.

④

󰼿EXIT - Save AREA and return to

BLC SETUP MODE.

Menu [FUNCTION] -

BLC AREA

ALL CLEAR ALL SET RETURN EXET

AGC

2120

COLOR DOME CAMERA

3-Axis

Signal System

Image Sensor

Effective Pixels

Video Output

Sync. System

Luminance S/N Ratio

Horizontal Resolution

Min. Illumination (F1.2)

Lens

Focus

Electronic Shutter

White Balance

Camera ID

Language

36 37

1) AGC setup

①

󰼿AGC default setting ON

↙

9. SPECIFICATIONS

HD61 HD61XMODEL

NTSC PAL

2:1 Interlace Transfer 1/3 Inch Super HAD CCD

510(H) x 492(V) 500(H) x 582(V)

Composite: 1.0Vp-p, 75Ω, Unbalanced

Internal Sync

More than 50dB (AGC OFF)

380 TV Lines

0.1 Lux(30IRE, AGC ON), 0 Lux(IR LED)

Manual Vari-focal (f=4~9mm)

Manual

1/60 ~ 100,000 1/50 ~ 100,000

ATW (1,800˚K~10,500˚K) / AWB / Fixed / Manual

ON / OFF

English / Korean / Chinese 1 / Chinese 2 / Japanese

10. TROUBLESHOOTING

If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician.

3-Axis

BLC, AGC

Day & Night

Privacy

Mirror

Gamma

Motion Detection

Contrast

Sharpness

Applicable Lens

Supply Voltage

Power Consumption

Operating Temperature

Storage Temperature

Dome Size (Ø)

Weight

ON / OFF (Level Adjustable)

BW / Color / Auto

ON / OFF (4 Programmable Zone)

ON / OFF (Horizontal)

User / 0.5 ~ 1.0 Adjustable

ON / OFF (64 Programmable Zone)

0 ~ 255 (Level Adjustable)

0 ~ 31 (Level Adjustable)

Manual Lens

12VDC (10V~15V)

Max. 4.5W / 360mA

-10℃~+50℃󰼿(Recommendation: -5℃~+40℃)

-20℃~+60℃

100 mm

Approx. 366g

COLOR DOME CAMERA

. Memo

Problem Solutions

②

󰼿Press MENU button in ON

to display the screen on the right side.

③

󰼿Use LEFT, RIGHT button to adjust AGC GAIN value (0~255) 0:MIN , 255:MAX

④

󰼿Press MENU button to return

to the previous screen.

↙

AGC CONTROL

AGC GAIN

↙󰼿:󰼿RETURN

Nothing appears on the screen.

095

2322

COLOR DOME CAMERA

The image on the screen is dim.

The image on the screen is dark.

The camera is not working properly, and the surface of the camera is hot.

The image on the screen flickers.

38 39

COLOR DOME CAMERA

• Check that the power cord and line connection between the camera and monitor are fixed properly.

• Check that you have properly connected VIDEO cable to the camera VIDEO output jack.

• Is lens stained with dirt? Clean your lens with soft, clean cloth.

• Set the monitor to proper condition.

• If the camera is exposed to too strong light, change the camera position.

• Adjust the lens' focus properly.

• Adjust the contrast feature of the monitor.

• If you have an intermediate device, set the 75Ω/ Hi-z properly.

• Adjust DC Level, on the OSD menu.

• Check that you have properly connected the camera to an appropriate power source.

• Is the camera facing to direct sunlight or fluoresent lighting? Change the camera position.

COLOR DOME CAMERA

3-Axis

8 9

COLOR DOME CAMERA

3-Axis

10 11

COLOR DOME CAMERA

4. COMPOSITION 5. INSTALLATION

Guide Pattern

Operation Manual

Mounting Screw

3-Axis

Stick the guide pattern on the wall or ceiling.

Drill four holes according to the guide pattern then

insert anchors into the drilled holes.

Draw out power / video wires to the connecting places.

Fixed the camera to a celling using four screws.

Adjust desired focus and scene by turning and moving

the 3-axis camera bracket by hand.

Put the dome cover over the base.

Fix the dome cover on the base by covering.

Service Monitor Cable

6. CONNECTION

Video

(Yellow)

Power- 12VDC (Red)

• The wire is polarized. • Use 12V DC power source.

No.

Function

Terminal Color

Video Output

Power Input

Yellow

Red

Video Output

GND

Remark

1.0 Vp-p

12VDC (10V~15V), 360mA (Max)

3-Axis

7. NAME AND FUNCTIONS

Tilt rotation: Adjusting the vertical angle.

Pan rotation: Adjusting the horizontal angle.

Horizontal rotation: Adjusting the horizontal position of the screen.

Focus handle: Focus (Far or Near)

Zoom handle: Zoom (Tele or Wide)

IR LED(4mm~9mm): 850nm / 30°(20EA), Power Consumption(4.5W)

Sensor

Ceiling

Guide Pattern

Dome Base

Mounting Screw

Dome Cover

NOTE

Insert coin to the side hole and remove the dome cover by twist coin.

Camera Lay-out

COLOR DOME CAMERA

Menu [FUNCTION] -

1) DAY NIGHT setup

①

󰼿Move to DAY NIGHT screen on the right side.

②

󰼿Change setting using LEFT, RIGHT button.

AUTO ↙ ◀ ▶󰼿B/W ↙ ◀ ▶ COLOR.

2) AUTO ↙ mode setup

①

󰼿Press MENU button in AUTO ↙ setup mode.

②

󰼿Move to screen on the right side.

③

󰼿Select item using UP / DOWN button.

④

󰼿Adjust value using LEFT / RIGHT button.

⑤

󰼿Press MENU in RETURN to return

to the previous screen.

24 25

COLOR DOME CAMERA

Menu [FUNCTION] -

1) B/W ↙ mode setup

①

󰼿Press MENU in B/W ↙ setting

②

󰼿Move to screen on the right side.

③

󰼿Use LEFT, RIGHT button

to set BURST ON / OFF.

④

󰼿After setup, return to the previous screen

by pressing MENU button.

26 27

COLOR DOME CAMERA

DAY NIGHT 1

DAY NIGHT 3

FUNCTION

BLC AGC

DAY NIGHT

PRIVACY MIRROR GAMMA MOTION RETURN

DAY NIGHT AUTO

DELAY

START LEVEL

END LEVEL

RETURN

DAY NIGHT B/W

BURST ON

OFF ON ↙ AUTO ↙ OFF OFF

0.45 OFF

092

074

1) DAY NIGHT OSD description

①

󰼿DELAY

DAY --> NIGHT or NIGHT --> DAY conversion time setup 0 : No DAY NIGHT AUTO conversion 1~63 : Can set from 1 second to 15 seconds

②

󰼿START LEVEL

DAY --> NIGHT conversion illumination intensity setup 0~255 (DEFAULT : 4 Lux) 0 : High illumination intensity, 255 : Low illumination intensity

Initial value setup is recommended.

③

󰼿END LEVEL

NIGHT --> DAY conversion illumination intensity setup 0~255 (DEFAULT : 12 Lux) 0 : High illumination intensity, 255 : Low illumination intensity

Initial value setup is recommended.

1) PRIVACY setup

①

󰼿Default setting OFF - Use LEFT,RIGHT button.

Change setup to ON ↙ mode.

②

󰼿After ON ↙ mode setup, 4 AREA groups are

configured as displayed on the right-side picture.

③

󰼿Press MENU button.

Details of each area is dsplayed.

2) PRIVACY details setup

①

󰼿Select AREA SEL - PRIVACY 0~3.

②

󰼿AREA STATE - 0~3 AREA ON/OFF

③

󰼿LEFT - Change left por tion of each AREA size.

④

󰼿RIGHT - Change right portion of each AREA size.

⑤

󰼿TOP - Change top portion of each AREA size.

⑥

󰼿

BOTTOM - Change bottom portion of each AREA size.

⑦

󰼿

COLOR - Change entire color of the AREA (16 COLOR)

Menu [FUNCTION] -

FUNCTION

BLC AGC DAY NIGHT

PRIVACY

MIRROR GAMMA MOTION RETURN

PRIVACY

AREA SEL AREA STATE LEFT RIGHT TOP BOTTOM COLOR RETURN

DAY NIGHT 2

PRIVACY

ON ↙ ON ↙ AUTO ↙ ON ↙ OFF

0.45 OFF

AREA 0

ON 017 058 020 055 001

COLOR DOME CAMERA

3-Axis

CAMERA ID

SHUTTER

WHITE BAL.

FUNCTION

ADJUST

LANGUAGE

RESET

EXIT

12 13

COLOR DOME CAMERA

Main Menu -

8. OPERATING CAMERA

SETUP MENU

• ON • OFF

• AUTO • FLK • FIXED • MANUAL

• ATW • AWB • FIXED • MANUAL

• BLC • AGC • DAY NIGHT • PRIVACY

• MIRROR • GAMMA • MOTION

• CONTRAST • SHARPNESS

• CB_GAIN • CR_GAIN

• ENGLISH • KOREAN • CHINESE1 • CHINESE2 • JAPANESE

SETUP

Push the Joy stick for one second, and the OSD appears on the screen. Move the Joy Stick up, down, left & right to control the OSD functions.

SW1

RIGHTLEFT

DOWN

J604

J613

J611

SW1

RIGHTLEFT

UTP1

DOWN

MENU(SET):

SET BY JOY STICK

J601

J603

J102

Service Monitor Connecter:

Use service monitor connector to set camera angle & focus when installing.

Setting up the Menu

SETUP

- Push and hold MENU button 1 second to access the setup mode.

• Select the status using the joystick. (up, down, left, right)

SETUP

CAMERA ID SHUTTER WHITE BAL. FUNCTION ADJUST LANGUAGE RESET EXIT

Main Menu -

CAMERA ID

OFF AUTO ↙ ATW

↙ ↙

ENGLISH

↙

1) CAMERA ID setup (default setting OFF)

①

1. Press MENU button, then SETUP mode is activated.

• MAIN SETUP menu is displayed on the monitor.

SETUP

2. Select OSD item using UP, DOWN button.

3. Set details using LEFT, RIGHT button.

4. Select "Exit" and then press the MENU button

CAMERA ID SHUTTER WHITE BAL. FUNCTION ADJUST LANGUAGE RESET EXIT

OFF AUTO ↙ ATW

↙ ↙

ENGLISH

↙

to finish the SETUP (Save and Exit)

14 15

COLOR DOME CAMERA

󰼿Press MENU key in ON

(Access ID setting MODE)

②

󰼿Press MENU key in CAMERA ID.

③

󰼿Character is changed each time UP, DOWN is

pressed. (Can select up to 63 letters)

④

󰼿Press MENU button in ↙ to

exit from ID setup mode

⑤

󰼿Press MENU button in 'C' to correct and erase

the chosen entry.

2) POSITION setup. Press POSITION ↙.

①

󰼿Move the character using UP, DOWN, LEFT, RIGHT button.

②

󰼿Press Menu button to confirm selection of the character.

③

󰼿Press Return to go to previous screen. ID is displayed by pressing EXIT on MAIN MENU.

↙

󰼿state.

ID SETUP

CAMERA ID

A ↙ _

POSITION

RETURN

COLOR DOME CAMERA

Menu [FUNCTION] -

1) MIRROR setup

①

󰼿MIRROR default setting OFF

ON setting - Use LEFT, RIGHT button.

②

󰼿Left and Right side is switched

as shown on the picture.

OFF ON

28 29

COLOR DOME CAMERA

Menu [FUNCTION] -

1) MOTION DETECTION setup

①

󰼿DEFAULT value OFF

②

󰼿In ON ↙ , press MENU button.

③

󰼿Display MOTION details.

2) AREA ↙ setup

①

󰼿In AREA ↙ , press MENU button. (see p.31)

3) MOTION TH. Setup

①

󰼿Set motion sensitivity 0(MAX)~255(MIN)

4) MOTION TRACE setup

①

󰼿ON : Display motion detection AREA.

COLOR DOME CAMERA

MIRROR

MOTION

Setting value can be adjusted using LEFT or RIGHT button.

FUNCTION

BLC AGC DAY NIGHT PRIVACY

MIRROR

GAMMA MOTION RETURN

FUNCTION

BLC AGC DAY NIGHT PRIVACY MIRROR GAMMA

MOTION

RETURN

MOTION

AREA ↙

MOTION TH.

MOTION TRACE

RETURN

OFF ON ↙ AUTO ↙ OFF OFF

0.45 OFF

OFF ON ↙ AUTO ↙ OFF OFF

0.45 OFF

037

OFF

1) GAMMA setup (DEFAULT 0.45)

①

󰼿In FUNCTION MODE,

use UP, DOWN button to select GAMMA.

②

󰼿Use LEFT, RIGHT button

to adjust GAMMA value. (USER ◀ ▶ 0.05 ◀ ▶ 0.10 ◀ ▶ 0.15 ~ 1.0)

1) MOTION AREA setup

①

󰼿Use UP, DOWN, LEFT, RIGHT button

to move AREA setting position.

②

󰼿Use MENU button to set and release AREA.

③

󰼿Press MENU button for more than 1 second

to move to MOTION AREA MODE

2) MOTION AREA MODE

①

󰼿You will return to MOTION AREA MODE

after "Exit" from MOTION AREA MODE.

Menu [FUNCTION] -

FUNCTION

BLC AGC DAY NIGHT PRIVACY MIRROR

GAMMA

MOTION RETURN

Menu [FUNCTION] -

MOTION AREA

ALL CLEAR ALL SET RETURN EXET

GAMMA

OFF ON ↙ AUTO ↙ OFF OFF

0.45 OFF

MOTION AREA 1

3130

COLOR DOME CAMERA