ScanPal EDA50 Enterprise Hybrid Device User Guide i
Disclaimer
Honeywell International Inc. (abbr. HII) reserves the rights to modify the specifications and
other information mentioned in this User Guide without prior notification. In any case, users
should confirm with HII whether any changes were made. This publication does not represent
any commitments of HII.
HII is not responsible for any technical or editing errors or omissions contained in this manual,
nor for any incidents or indirect damages caused by providing, implementing or using this
material. HII is not responsible for the softwares or hardwares selected or used in orde r to
achieve the desired results.
The proprietary information contained in this article is protected by copyright. All rights
reserved. Without prior written consent from HII, any form of photocopy, copy or translation
into other languages is not allowed.
Trademark Rights
Android, Google and other marks are trademarks of Google Inc.
The Bluetooth trademarks are owned by Bluetooth SIG, Inc. U.S.A. and licensed to Honeywell
International Inc.
Other product names mentioned in this manual may be trademarks or registered trademarks
of their respective companies, which are owned by these companies.
Patents
For information on patents, please refer to www.hsmpats.com.
Mechanical and environmental specifications ................................................................... 71
ScanPal EDA50 Enterprise Hybrid Device User Guide v
vi ScanPa l EDA5 0 Enterprise Hybrid Device User Guide
Technical Support
If you need installation or troubleshooting help, please contact us via:
Knowledge base: www.hsmknowledgebase.com
Honeywell knowledge base provides thousands of turnkey solutions. If the
knowledge base can't help you solve your problems, you can submit your
questions or ask question on Honeywell technical support website.
Technical support website: www.hsmsupportportal.com
Login Honeywell technical support website to search for knowledge base,
submit your difficulties or questions, ask for call-back services or provide
feedbacks. Please provide more detailed information when filling the forms. You
can also upload attachments for explanation.
Contacts: www.honeywellaidc.com/locations
For the latest contacts, please visit our website.
Product Service and Maintenance
Honeywell International Inc. provide services for all of its products all over the
world via its service centers. For information about the site of service centers,
please visit www.honeywellaidc.com and select English as preferred
language, then select Support > Contact Support > Service and Maintenance. Please contact our service center to get RMA (Return Material
Authorization) numbers before sending the products for maintenance.
To get Honeywell service during warranty or out of warranty, please send the
product together with the purchase date records to Honeywell service center
(postage paid).
Limited Warranty
For information about the warranty, please visit www.honeywellaidc.comand
select Chinese as preferred language, tap Resources > Warran ty.
Feedback
Your feedback is very important for us to improve the quality of documentation.
Please contact technical communication departments to submit your feedback
on the User Guide: ACSHSMTechnicalCommunications@honeywell.com.
ScanPal EDA50 Enterprise Hybrid Device User Guide vii
viii ScanPal EDA50 Enterprise Hybrid Device User Guide
1. Features of ScanPal EDA50 Enterprise Hybrid Device
1 Features of ScanPal EDA50
Enterprise Hybrid Device
EDA50 with Android 4.4 operating system will be introduced in this chapter.
Users can learn something about the main features, functions and accessories
of this terminal from this chanpter.
ScanPal EDA50 Enterprise Hybrid Device User Guide 1
1. Features of ScanPal EDA50 Enterprise Hybrid Device
EDA50 Brief Introduction
Honeywell EDA50 enterprise hybrid device is a smart phone for enterprise
users, delivering stable and secure enterprise data management and wireless
communications through Android operating system. The main features of
ScanPal EDA50 are: field-proven architure, large-screen display, high-capacity
battery, barcode imaging and ergonomic design.
• Android™ 4.4 OS
• 2 GB dynamic RAM, 8GB flash memory
• Large display with sensitive multi-touch screen.
• High-performance area imaging features with an ergonomic scan trigger.
• WCDMA / GSM wireless WA N communications ensure high-speed data
transmission and high-fidelity sound support for all network technologies.
• IEEE 802.11a/b/g/n.
• Bluetooth 4.0.
• Near-field com m unication (NFC) technology for short-range wireless data
transmission.
• High value-added software components support professional imaging and
optical character recognition (OCR) features.
• IP54 rated protection.
• Conveni ent Micro SD slot that supports up to 32GB expansion.
• Integrated GPS receiver (support WAN wireless communications).
• 5 mega pi xels color camera.
2 ScanPa l EDA50 Enterprise Hybrid Device User Guide
1. Features of ScanPal EDA50 Enterprise Hybrid Device
Power
Indicator
Scan
Indicator
Display
Function
Key
Home Key
Return Key
EDA50 front view
ScanPal EDA50 Enterprise Hybrid Device User Guide 3
1. Features of ScanPal EDA50 Enterprise Hybrid Device
Left Side ViewRight Side View
Power
Button
Reset
Button
Scan
Button
The Bottom
Volume
Up
Volume
Down
Scan
Button
Charging
Contact
USB
Cover
EDA50 side and bottom view
4 ScanPa l EDA50 Enterprise Hybrid Device User Guide
1. Features of ScanPal EDA50 Enterprise Hybrid Device
Scan
Engine
Speaker
Camera
Battery Cover
Battery Cover
Buckle Handle
Battery
Cover
String
Buckle
Safety Lock
Battery Cover
Buckle
Battery Cover
Safety Button
EDA50 back view
ScanPal EDA50 Enterprise Hybrid Device User Guide 5
1. Features of ScanPal EDA50 Enterprise Hybrid Device
Battery
EDA50 uses 3.8 v rechargable lithium ion battery as its main power supply. The
battery capacity is 15.2 watt/hour. Battery life is influenced by many factors,
such as: screen brightness, the length of time the device waits before the
screen automatically go to sleep, input configurations, extreme temperature and
using behaviors, etc.
Honeywell suggests you to keep the battery charged to avoid data loss. When
replacing the battery, the terminal will be automatically turned off and then you
need to cold start it.
If you need to buy a replacable battery, please contact regional resellers.
Warning: Improper use of the battery of this terminal can cause a fire or
chemical burns. Please don't disassemble the battery or heat it to 100 ° C
(212 ° F) or more, or incinerate the battery. Make sure waste batteries are
properly disposed. Keep out of reach of the children.
We recommend users to use Honeywell Li-ion battery pack. Damg aes
caused by using non-Honeywell batteries will not be covered by
Honeywell warranty.
Charging
Before using EDA50, you need to make sure the battery (model number BATEDA50) is fully charged. You can charge the battery before or after installing it
to EDA50. It will take about 4 hours for the battery to be fully charged,
regardless what kind of chargers are used:
Insert EDA50 with battery installed into the charger or cradle.
6 ScanPa l EDA50 Enterprise Hybrid Device User Guide
Replacing batteries
When the battery power is low, you can charge it together with the terminal, or
replace it with a fully-charged battery.
1. Save all the files and close all running apps.
2. Long press the power key. Until the follow interface pop up:
1. Features of ScanPal EDA50 Enterprise Hybrid Device
3. Tap Turn off.
4. EDA will ask whether to turn off, tap Yes.
ScanPal EDA50 Enterprise Hybrid Device User Guide 7
1. Features of ScanPal EDA50 Enterprise Hybrid Device
After it's turned off, do as the following instructions manually:
1. Press down the battery cover safety button to move the lock to the unlock
position at right;
2. Open the battery cover with the battery cover buckle handle;
8 ScanPa l EDA50 Enterprise Hybrid Device User Guide
1. Features of ScanPal EDA50 Enterprise Hybrid Device
3. Insert the battery (Insert the non-connector side first, then press the battery
down to establish connection between the battery and the phone)
4. Press down the battery cover
ScanPal EDA50 Enterprise Hybrid Device User Guide 9
1. Features of ScanPal EDA50 Enterprise Hybrid Device
5. Press down the battery cover safety button to move the battery cover safety
lock to the lock position at left
Battery icon
Battery icon on the status bar shows the power status of the battery. The
following table only contains several of the icons. For detailed information about
battery life and power remained, please go to Settings > Battery.
Battery icon
IconStatus
Battery power is 100% full
Battery power is 50% full
Battery power is too low. Replacing the battery right now.
The terminal has been connected to external power supply for
10 ScanPal EDA50 Enterprise Hybr id Device User Guide
charging.
Battery failure occurs. Please replace the battery. If the failure still
1. Features of ScanPal EDA50 Enterprise Hybrid Device
Power indicator on the upper left corner of the terminal shows the battery
charging status. It can also be used as system message indicator. For detailed
setting methods, please refer to
ScanPal EDA50 Enterprise Hybrid Device User Guide 11
1. Features of ScanPal EDA50 Enterprise Hybrid Device
Changing power indicators
If the default indicators for battery charging (flashing green) is inappropriate for
your environment, you can change the indicator.
In addition to changing the default power indicator, you can also select:
• Default Battery LED
• No Battery LED
If you prefer the indicator to be solid amber and to change to solid green when
in charging, you need to perform Default Battery LED settings. If you prefer the
indicator as message notification (application or device management solution
notification) indicator, you need to select No Battery LED settings.
Default power indicator meanings
Connect to
power supply
No Flashing red
No No light Battery power is 15% or more
Yes Stable red
Yes Stable amber
Yes Stable green Battery power is over 90% full
1. Tap ll Applications > Settings > Battery LED
2. Select from the following options:
• Default Battery LED
• HSM Battery LED (Factory settings)
• No Battery LED
Indicator status Description
Battery power is less than 15%
full
Battery power is less than 15%
full
Battery power is between 15%
to 90% full
12 ScanPal EDA50 Enterprise Hybr id Device User Guide
1. Features of ScanPal EDA50 Enterprise Hybrid Device
Checking the remaining battery capacity
Except for the battery icon and power indicator, you can also get the battery
capacity information from Settings.
1. Tap All Applications > Settings
2. Tap Battery. The current percentage of remaining battery capacity and the
remaining time will be displayed. The list will present the power consumed
by each application and service. For detailed usage information, please tap
the respective applications and services in the list.
Battery life and maintenance
The battery will discharge slowly if it's placed outside of the terminal.
Tips for battery maintenance
If you have the
following needs:
Low power icon
shows on the
screen or the
power indicator
lights on when the
terminal is in use
The terminal will
not be in use for 5
mins or more
The terminal will be
stored for more
than one day
Power saving plan:
Long press the power key and choose Turn Off.
Make sure no low power icon displayed and the power
indicators doesn't light on. Switch to sleep mode by
pressing the Power key.
• If you need to store this terminal for several days
(like a weekend), you need to install a fully
charged battery or connect the terminal to the
power supply.
• If you need to store it for a longer time, remove
the battery and charge it. Put the terminal and the
battery in a shady and cool place after the battery
is fully charged.
• If the battery is to be stored for several months,
regular charging is needed for excellent battery
performance.
ScanPal EDA50 Enterprise Hybrid Device User Guide 13
1. Features of ScanPal EDA50 Enterprise Hybrid Device
Store the battery
outside the terminal
Put the battery in the charger.
14 ScanPal EDA50 Enterprise Hybr id Device User Guide
1. Features of ScanPal EDA50 Enterprise Hybrid Device
Battery maintenance recommendations and safety
protection measures
• Fully charge the battery before using it. The battery is only partly charged
when get packed.
• Refer to the chapter "charging" to get the right process for battery charging.
Using the battery for other devices may cause damages on the device or
the battery.
• Avoid battery or terminal drops. If you suspect that a battery or terminal
fails, send it to Honeywell service center for verification.
• This battery can only replace another BAT-EDA50 battery. These batteries
have been tested and meet the appropriate safety standards. If you need to
replace the battery, please contact Honeywell service representatives or
the resellers.
• There are security risks in waste batteries. Before cleaning up the battery,
stick the poles with insulation tape.
• Do not modify the battery or attempt to insert foreign objects into the
battery.
• Do not solder directl y to the battery poles.
• Do not short connect the batter y and put the battery away from metal
objects.
• Do not drop or mecha nica lly shock or extrude the battery.
• Do not disassemble or o pe n the battery. Do not crush, bend or deform the
battery; Do not puncture, shred or burn the battery.
• Do not immerse the battery in water.
Enabling Airplane mode
If you don't need to connect to any wireless network, you can enable the
airplane mode to turn off all wireless receivers to save power.
1. Tap Settings.
2. Tap More under Wireless & Networks.
3. Select Airplane Mode box to enable airplane mode.
ScanPal EDA50 Enterprise Hybrid Device User Guide 15
1. Features of ScanPal EDA50 Enterprise Hybrid Device
Powering on
After the battery is fully charged and installed into ScanPal EDA50, turn on it for
the first time:
Press down and then release the power key. Please note: after complete the installation instructions, the welcome interface
will not appear again. The interface appears as locked screen interface after
each time you turn on the terminal.
Unlocking the screen
Every time you turn on the terminal, you need to unlock the screen.
• Slide the lock icon to any edge of the screen to unlock it.
• After the EDA50 is deployed, we suggest you to set password to protect
your terminal. Tap All Applications > Settings > Security > Encryption.
16 ScanPal EDA50 Enterprise Hybr id Device User Guide
Scanning Indicator
The scanning indicator indicates the status of the scanner. For barcode
scanning method, please refer to the chapter "Scanning barcodes".
Scanning
Indicator
1. Features of ScanPal EDA50 Enterprise Hybrid Device
Scanning indicator definition
Light of the
indicator
Green Good read for the barcodes
Red Barcodes reading failed
ScanPal EDA50 Enterprise Hybrid Device User Guide 17
Meanings
Loading...
+ 58 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.