Honeywell C7041, C7046, C7100 Catalog Page

Temperature Sensors

C7041 Temperature Sensor Accessories

Product Number Description Application Used With

50001774-001/U 5 inch immersion well Temperature Sensor Part or Accessory C7031D2000, C7031D2003, C7041D2000, and C7041D2001 only

50001775-001/U Immersion well adaptor Temperature Sensor Part or Accessory C7031D2000, C7041D2000 series to thread into old 32005960-

001

C7046 Discharge Air Temperature Sensors

Air Temperature Sensors function as primary and/or secondary sensors in electronic control systems.

• No settings or calibration required.

• Solid state components not affected by dust or dirt.

• Fast reacting.

• Rugged aluminum insertion probe.

• Mounts on duct or plenum surface with integral mounting flange, or in a 2 x 4 in. junction box.

Application: Primary and/or secondary sensors in electronic control

systems

Dimensions, Approximate: 1 in. high x 2 in. wide x 9 in. deep (25 mm

high x 51 mm wide x 229 mm deep)

Maximum Ambient Temperature: 250 F (121 C) Operating Temperature Range: 40 F to 150 F (4 C to 66 C)

Insertion Length

Product Number Sensor Type

C7046A1004/U 3K ohm @ 77 F NTC 8 in. 203 mm W973, W6210, W6215, W7210, W7215, W7459, W7460

C7046A1038/U 3K ohm @ 77 F NTC 12 in. 305 mm W973, W6210, W6215, W7210, W7215, W7459, W7460

C7046B1010/U 22.8 K ohm NTC @ 77 F 6 in. 152 mm W7080

C7046C1000/U 3K ohm @ 77 F NTC 8 in. 203 mm W973

C7046D1008/U 1097 ohm @ 77 F PTC 8 in. 203 mm Excel 80, 100, 500, and 600 controllers and T775 Series 2000

Shipping Temperature Range: -30 F to +160 F (-34 C to +71 C) Mounting: Mounts on flat duct or plenum surface with integral mounting

flange or in a 2 in. x 4 in. (51 mm x 102 mm) junction box.

Includes: 6 in. leadwires Comments: Quick response time. Sensor probe diameter is 1/4 in. (6

mm). 6 in. leadwires.

Used With(inch) (mm)

Commercial

C7100 Averaging Duct Temperature Sensors

Averaging Duct Temperature Sensors are used to sense temperature in discharge duct.

• Use to troubleshoot system operation.

• Platinum positive temperature coefficient sensor.

• Factory calibrated; no settings or field calibration required.

Dimensions, Approximate: 1 13/16 in. high x 1 13/16 in. wide x 13 1/4

in. deep (46 mm high x 46 mm wide x 336 mm deep)

Maximum Ambient Temperature: 250 F (121 C) Shipping Temperature Range: -30 F to +150 F (-34 C to +66 C)

Product Number Application Sensor Type

C7100A1015/U Averaging Duct Discharge

C7100B1013/U Averaging Air Sensor 22.8 K ohm @ 77 F NTC 13 in. 330 mm 40 F to 150 F 4 C to 64 C W7080

C7100C1003/U Averaging Duct Discharge

C7100D1001/U Averaging Duct Discharge

Air Sensor

PT3000, 3484 ohms @ 77 F PTC

PT3000, 3484 ohms @ 25C PTC

PT1000, 1097 ohms @ 77 F PTC

Mounting: Discharge Duct Comments: Recessed 1/4 in. (6 mm) quick-connect terminals. 3/4 in.

(19 mm) diameter sensor probe.

Insertion Length

13 in. 330 mm 40 F to 220 F 4 C to 104 C W7100, W8900

13 in. 330 mm 40 F to 220 F 4 C to 104 C T775

13 in. 330 mm 40 F to 220 F 4 C to 104 C Excel 500,

Operating Temperature Range

Used With(inch) (mm) (F) (C)

T775 Series 2000

Components

70-6910 463