Page 1
Models 2202 & 2204
DIGITAL STEEL FIRE & SECURITY SAFE
Read this manual carefully and never store it inside the safe!
Page 2
1
Models 2202 & 2204
Digital Steel Fire & Security Safe
PACKAGE CONTENTS
1 – Digital Steel Fire & Security Safe
1 – Operation Manual
4 – “AA” Batteries
2 – Override Access Keys
1 – Silica Gel Pack
1 – Removable Drawer Tray
ATTENTION
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your safe, please contact our Consumer
Assistance Department by telephone.
Store will not accept returned products without prior authorization. You must first
contact our consumer assistance department.
US/Canada 1-877-354-5457 (Toll Free)
Mexico 01-800-288-2872 After English voice recording stops you must then enter
800-860-1677 to complete your call. (Toll Free)
Australia 0011-800-5325-7000 (Toll Free)
Germany/New Zealand 00-800-5325-7000 (Toll Free)
Other Countries XX*-310-323-5722
XX*- Dial U.S. Country Code first (Toll Charges Apply)
PRODUCT OVERVIEW
FRONT:
A - Safe Door
B - Entry Handle
C - Keypad Cover
D - Door Hinges
E - Electronic Digital Keypad
INSIDE DOOR:
A - Live locking Bolts
B - Reset Button
C - Dead Lock Bolt
D - Door Hinges
Page 3
2
SETUP & OPERATION
STEP 1: INSTALL BATTERIES
IMPORTANT: The starter batteries included with this product are for testing
purposes only and should be immediately replaced with new alkaline or lithium
batteries. It is NOT RECOMMENDED to use Non-alkaline or rechargeable
batteries.
1. The battery compartment is located
behind round digital keypad housing.
To gain access, turn the housing to the
left (counterclockwise) and carefully
pull forward and down.
1.
2. Insert 4 “AA” batteries (included).
Ensure the batteries are installed in
the correct direction, with regard to
polarity (+ and -).
2.
3. Re-install battery compartment cover
by inserting into the locking holes and
turning housing to the right (clockwise).
3.
TO REPLACE BATTERIES:
Weak or dead batteries should be replaced immediately and all 4 batteries
should be changed. To replace the batteries please follow the instructions in
the SETUP section. Remember to always remove batteries from safe if not
using for an extended period of time. If your batteries are completely dead
and you cannot open the safe by using the digital keypad, use the override
access key to open safe and access the battery compartment.
IMPORTANT: When the batteries need replacing,
the small Red LED lamp will begin to glow. If the
batteries are fully discharged, the digital keypad will
not function and the batteries will need to be
replaced in order to gain access to the safe.
If the batteries are removed or fail, the keypad memory will NOT be erased
and the active programmed code will still work once power has been
restored.
Page 4
3
SETUP & OPERATION
STEP 2: UNLOCK AND OPEN THE SAFE
1. Lift up on the protective dust
cover to gain access to the
keypad
1.
2. On the keypad, press
“ENTER” then “7 7 7 7” then
“ENTER” again.
2.
3. If the correct code has been
entered, a musical code will
chime, the green LED will
blink and the lock will click
open.
3.
4. Rotate the handle upwards
and pull the door open.
4.
TO LOCK THE SAFE:
Carefully close the door and
rotate the handle downwards.
Safe is now in locked position
and security code will need to
be re-entered to open.
Page 5
4
SETUP & OPERATION
STEP 3: PROGRAM NEW USER CODES
1. With the door open, press the
small black button (B) located
near the inside center of the door.
1.
2. You will hear a musical chime and
the small green LED will glow.
NOTE: If the green LED stops
glowing, you need to press the
black button and start again.
2.
3. Using the digital keypad, you now
have approximately 5 seconds to
begin entering a new personal
code using a minimum of 4 digits
to a maximum of 16 digits.
3.
4. Once you have entered new code,
press ENTER key. You will hear a
chime indicating new code is now
programmed into memory.
4.
Before closing and locking the safe door, you should enter your new code to
confirm that it is correct and unlocks the safe.
For future reference, your new code should be recorded and placed in a secure
location away from the safe.
Page 6
5
SECURITY FEATURES
SECURITY LOCKOUT PERIOD:
If an incorrect code is entered, the LED’s will blink and a special two-tone
alarm will sound. You should then re-enter the proper code. If an incorrect
code is entered 4 times, the safe will enter a security lockout period of about
5 minutes. During this time, you will not be able to enter the safe.
EMERGENCY ACCESS
OPEN SAFE WITH EMERGENCY ACCESS KEY
If you have forgotten your personal access code or the electronic lock is not
functioning properly, you can use the Emergency Override Key to gain access.
1. The emergency override lock is
located behind the batteries under
the round digital keypad housing.
To gain access, lift the dust cover,
rotate the housing to the left
(counterclockwise) and carefully
pull it forward and down.
1.
2. Temporarily remove the batteries
and Insert the emergency override
key into the lock (K) and turn it
counterclockwise to the left.
2.
3. Rotate the handle upwards and pull
the door open.
3.
4. Remove the key and replace the
4-AA batteries. Reposition the
digital keypad housing into the
locking holes and rotate the
housing to the right (clockwise).
4.
5. Follow Step 3 (Setting New Personal Entry Code) to re-set your code and
test as instructed.
Page 7
6
PERMANENT INSTALLATION
SECURING YOUR SAFE TO THE FLOOR
This safe includes a special knockout insert located on the bottom which
allows permanent and secure installation to the floor. Mounting hardware is not
included and depending on the type floor (Concrete or wood) it should be
purchased separately from your local retailer.
1. Open the safe and remove all the
contents (including any shelves if
included with safe) and locate the cap in
the center of the safe floor. Using pliers,
remove the cap by turning counter
clockwise (left).
1.
2. To remove the plug you must carefully
lay the safe down on the back and
remove it by pushing it out with a
screwdriver. Once the plug is removed,
return the safe to the upright position.
2.
3. Position the safe in the area where you
want to secure it and using a marking
pen, mark the exact location of the
mounting hole.
WOOD - If installing on a wood floor, a lag
screw and large washer should be used to
secure the safe to the floor.
CONCRETE - If installing on a concrete
slab, a concrete insert, screw and large
washer should be used.
3.
Page 8
7
ORDERING NEW / REPLACEMENT KEYS
The following information is required to order keys:
1. PROOF OF OWNERSHIP (1 of 2 Options Below)
SALES RECEIPT & IDENTIFICATION – INTERNATIONAL ORDERS
ONLY!
• Copy of sales receipt showing Store, Date & Product
Description.
• Copy of your picture I.D. (Drivers license, passport, regular I.D.).
PRODUCT OWNERSHIP VERIFICATION FORM
If sales receipt is not available, contact us by email or telephone to
request a “Product Ownership Verification Form”.
2. ORDER INFORMATION
CONTACT INFORMATION
• Name & Shipping Address
• E-mail address (If Available)
• Telephone Number
• Best Time to Contact You
PRODUCT INFORMATION
• Safe Model #
• Safe Serial #
• Lock Key #
• Quantity of Keys Ordered
3. METHOD OF PAYMENT
• Telephone:
Visa or MasterCard
• Mail:
Check or Money Order
NOTE: For pricing please contact Consumer Assistance.
Contact information is located on the back cover of this manual
Terms subject to change without prior notification.
SAFE SERIAL NUMBER
Whenever contacting our Consumer
Assistance Department, you will need to
provide them with the serial number of your
safe. The serial number tag is located either
on the lower right front or lower front right of
the safe.
Page 9
8
LIMITED WARRANTY
LH Licensed Products, Inc., (“LHLP, Inc.”) warrants that for a period of seven (7) years
from the date of purchase, this product will be free from structural or mechanical
defects resulting from materials or workmanship. LHLP, Inc., at its sole option and as
the purchaser’s sole remedy under this warranty, will repair or replace this product or
any component of the product found to be defective during the warranty period.
Replacement or repair will be made with a new or remanufactured product or
component. If the product is no longer available, replacement may be made with a
similar product of equal or greater value. THIS IS YOUR EXCLUSIVE WARRANTY.
This warranty is only valid for the original retail purchaser from the date of initial retail
purchase and is not transferable. You must keep the original sales receipt. Proof of
purchase is required to obtain warranty service.
LHLP, Inc. dealers, service centers, or retail stores selling this product do not have the
right to alter, modify or in any way change the terms and conditions of this warranty.
This warranty does not apply to the finish on the product. This warranty does not cover
normal wear and tear of parts or damage resulting from any of the following: negligent
use or misuse of the product, use contrary to the operating instructions, disassembly,
repair or alteration by anyone other than LHLP, Inc. or an authorized service center,
improper installation, or exposure to extremes of heat or humidity. Further, the
warranty does not cover Acts of God, such as fire, flood, hurricanes and tornadoes.
LHLP, Inc. shall not be liable for any incidental or consequential damages caused by
the breach of any express or implied warranty or otherwise relating to the sale of this
product. LHLP, Inc. is also not responsible for: costs associated with removing or
installing the product; damage or loss of the contents of the product; nor for the
unauthorized removal of the contents; or damages incurred during shipment.
THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, AND LHLP, INC. DISCLAIMS ANY AND ALL OTHER
COVENANTS AND WARRANTIES.
Except to the extent prohibited by applicable law, any implied warranty of
merchantability or fitness for a particular purpose is limited in duration to the duration
of the above warranty period. Some states, provinces or jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages or limitations on how
long an implied warranty lasts, so the above limitations or exclusion may not apply to
you. This warranty gives you specific legal rights, and you may also have other rights
that vary from state to state, or province to province, or jurisdiction to jurisdiction.
LIFETIME AFTER-FIRE REPLACEMENT GUARANTEE
If this Honeywell UL classified fire resistant product was purchased from LH Licensed
Products, Inc. (“LHLP”) and is damaged by fire at any time while still owned by you
(the original owner), LHLP will ship a free replacement if you send the following to
Customer Service, LH Licensed Products, Inc., 860 E. Sandhill Ave., Carson, CA
90746 USA:
1. Your name, mailing address, email address, and phone number with area code;
2. A description of the fire, the model number and a photo of the burned unit, and a
copy of the report from the fire department, insurance or police.
Freight on the replacement unit is not included in the guarantee and must be paid by
the consumer. If an identical product is no longer available, LHLP will provide a similar
unit from its current product line. LHLP is not responsible for any loss or damage to
the contents of the safe.
Page 10
9
CONSUMER ASSISTANCE
EMAIL (Best Contact
Method):
LHLPCustomerService@LHLPinc.com
WEBSITE:
www.Honeywellsafes.com (Effective April 15, 2013)
ADDRESS:
Consumer Assistance Dept.
LH Licensed Products, Inc.
860 East Sandhill Avenue
Carson, CA 90746 USA
TELEPHONE:
US/Canada 1-877-354-5457 (Toll Free)
Mexico 01-800-288-2872 After English voice recording stops you
must then enter 800-860-1677 to complete your call. (Toll Free)
Austrailia 0011-800-5325-7000 (Toll Free)
Germany/New Zealand 00-800-5325-7000 (Toll Free)
Other Countries XX*-310-323-5722 (Toll Charges Apply)
XX*- Dial U.S. Country Code first
CALL CENTER HOURS:
US/Canada 7am – 5pm (PST**) Mon – Fri
CALL BACK HOURS:
Other Countries 7am – 8pm (PST**) Mon – Fri
PST**- Local time in Los Angeles, CA, USA
INTERNATIONAL CALL BACK HOURS:
If you need to speak with a consumer assistant and cannot contact us during the Call
Center hours above, please send an email or leave a telephone message, including your
Name, Telephone Number and the best time for us to contact you during the Call Back hours
above and we will make our best effort to contact you and help to answer any of your
questions or concerns.
Manufactured by
LH Licensed Products, Inc.
860 East Sandhill Avenue
Carson, CA 90746
The Honeywell Trademark is used under license from Honeywell
International Inc. Honeywell International Inc. makes no representations
or warranties with respect to this product.
Rev. 02/13/2014
Loading...