Honeywell 1101, 1108, 1106 User Manual
FIRE & WATER CHESTS
Models 1101-1108
Read this manual carefully and
never store it inside the safe!
PACKAGE CONTENTS
1 – Chest
1 – Operation Manual
2 – Entry Keys
1 – Silica Gel Pack
PRODUCT OVERVIEW
IMPORTANT!
To Ensure Fire & Water Protection,
Always Store Flat with Lid Up!
Models 1101-1108
DO NOT RETURN SAFE TO STORE!
If there are any missing parts or you have
difficulty setting up or operating your safe,
please contact our Consumer Assistance
Department by telephone:
1-877-354-5457
(USA & Canada)
Monday–Friday
7am - 5pm PST
A - Chest Lid
OPEN COMPRESSION LATCHES (All Models Except 1101)
1. Press in on small black
piece at bottom of latches.
1.
2. Lift latches slightly upward
while pressing bottom.
2.
3.
3. Once latch is lifted upward,
pull top of latch back.
UNLOCK CHEST (All Models)
4. Once latches are open,
insert key into lock cylinder.
5. Turn the key to the right
¼ turn (90º clockwise).
6. Chest is now unlocked and
you may lift the lid.
B - Compression Latches
(All Models except 1101)
C - Chest Body
D - Lock Assembly
E - Latch Buttons
(All Models except 1101)
F - Lock Cylinder
G - Handle
(All Models except 1106 & 1108)
Never Store in Upright Position with
Lock (& Handle) Facing Up!
4. 5.
LOCK CHEST (All Models)
1. Close lid and insert key into
lock cylinder.
1. 2.
2. Turn the key to left ¼ turn
(90º counterclockwise).
6.
3. Chest is now locked and
you may remove the key.
3.
CLOSE COMPRESSION LATCHES (All Models Except 1101)
4. With chest locked, lift latches
and press flat against chest.
5. With latches flat against
chest push downward.
6. Press inwards on latches to
ensure latch is sealed.
RIGHT!
4. 5. 6.
Loading...