Honewell MHML87D92DE0908 Operation Manual

Operation & Installation Guide

MHML87D92DE0908

ENGLISH

Model 2087D / 2087DE
Model 2092D / 2092DE

with Emergency Override Key

Read These Instructions Very Carefully!

Home and Office Security Safes

Index

Overview of Your Safe ...................................

Opening Safe For The First Time................

Test Locking System........................................

Programming a Personal Passcode ...........

Emergency Override Key/

Battery Replacement......................................

Additional Features.........................................

Use, Care and Maintenance .............................

Customer Support ...........................................

Page 1

Page 2

Page 3

Page 5

Page 6

Page 7

Page 8

Page 9

For Your Protection

• Do not remove the Serial Number tag from the safe.

• Store Emergency Override Keys away from (NEVER INSIDE) safe.

• Record all Safe Identification Numbers on Safe Identification
Record (last page).

• Save this manual and NEVER keep it inside the safe.

Overview of Your Safe

WELCOME!

Your new Honeywell Waterproof Fire Theft Safe™ will provide years of safe
and secure protection for your valuables, important documents and other
personal items. All Honeywell safes are designed and built using the highest
manufacturing standards to ensure maximum user satisfaction under a variety
of conditions. With proper care, your Honeywell safe will provide “Peace of
Mind” for many years to come.

Thank you and Enjoy!

The following list outlines the items and quantities of each included with
your new safe. Please carefully check the list to confirm all items have been
received. If any item is missing, then please contact Customer Service
@ 1-800-223-8566.

Operation & Installation Guide 1 ea.
Emergency Override Key 2 ea.
Adjustable Shelf 1 ea.
AA Batteries 4 ea.

Important: DO NOT RETURN SAFE TO STORE

If you are missing parts, have difficulty programming your safe or
have any other questions pertaining to its proper use and care, DO
NOT RETURN your safe to the store. Please contact Customer Service
at 1-800-223-8566 (USA & Canada) for assistance.

Home and Office Security Safes

1

Opening Safe For The First Time

Important: FIRST TIME ACTIVATION

Your safe is ready for activation. To allow the safe to be opened and to prevent
locking of the safe prior to completing the first-time user activation procedures, a
solenoid deactivation safety device has been installed.

Batteries and Emergency Override Keys

Remove 4 “AA” batteries and 2 Emergency Override Keys. They are
located in the protective Styrofoam insert at the top of the box.

User Activation

Install Batteries

1. Turn handle upwards to the right and pull open the safe door.

2. Slide the battery compartment cover (located inside the
safe at the top of the door) forward and remove. Install
the 4 “AA” batteries. Make sure the batteries are installed
in the proper direction as indicated in the battery
compartment. Slide the cover back into place.

3. After the batteries are correctly installed, the red and green
lights located at the top of the keypad on the front of the safe
will blink twice, the keypad backlight will flash once and
you will hear a single beep.

GREEN

LIGHT

-

+

LIGHT

+

-

RED

4. Proceed to Activate Lock.

Important: ENABLE/DISABLE SOUND

Once the batteries are installed, if you do not hear a beep when entering
the factory pre-set Passcode or during the personal Passcode re-programming
process, enter the following key sequence into the digital keypad: # * #
This will turn the sound on. Repeat the process if you want the sound turned off.

Activate Lock

1. Locate the small plastic Locking Pin on the inside of the
safe door. Grip and pull out completely. Pin can then be
properly discarded.

2. Leave the safe door open and proceed to Electronic
Locking System Test.

2

Test Locking System

Electronic Locking System Test

With the door still open, you can test the Electronic Digital Lock
by manually activating the Locking System.

To activate the Locking System, locate the Locking Push Button
on the inside of the safe door, push it in and turn the handle
downward to the left. This will cause the Live Bolts to extend
out and into the “locked” position. Now with the door open
and the Live Bolts in the locked position, you may proceed to
Testing the Passcode.

EXTENDED
LIVE BOLTS

LOCKING PUSH

BUTTON

Important: ENGAGING LIVE BOLTS

Closing the safe door with the Live Bolts in the locked (extended) position can
damage the safe. The Locking Push Button should only be used when testing
or programming the safe with the door remaining open.

Home and Office Security Safes