Honda Lock Mfg HLBUS 1, HLIKN 1R User Manual

Immobilizer System

The immobilizer system protects
your vehicle from theft. If an
improperly-coded key (or other
device) is used, the engine’s fuel
system is disabled.

When you turn the ignition switch to
the ON (II) position, the immobilizer
system indicator should come on
briefly, then go off. If the indicator
starts to blink, it means the system
does not recognize the coding of the
key.Turntheignitionswitchto the
LOCK (0) position, remove the key,
reinsert it, and turn the ignition
switch to the ON (II) position again.

The system may not recognize your
key’s coding if another immobilizer
key or other metal object (i.e. key
fob) is near the ignition switch when
you insert the key.

If the system repeatedly does not
recognize the coding of your key,
contact your dealer.

Donotattempt to alter this system
oraddother devicesto it. Electrical
problems could result that may make
your vehicle undriveable.

If you have lost your key and cannot
start your engine, contact your
dealer.

As required by the FCC:
This device complies with Part 15o f the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.

Changes or modifications not expressly
approved by the party responsible for
compliance could void theuser’s
authority to operate the equipment.

This device complies with Industry
Canada Standard RSS-Gen.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.