Honda Automobiles Security System User Manual

SECURITY SYSTEM

KIT NO.: 08E51-EP4-101

OPERATING INSTRUCTIONS

Contents

Introduction..................................................... 3

Emergency Disarming

During Alarming ........................................ 4

During the Entry Delay Time..................... 4

System Controls

Arming Mode (MANUAL AUTO)...............

Arming Mode (AUTO MANUAL) ...............

Valet (Automatic Arming Mode only)

Placing the System in the Valet Mode ...... 7

In the Valet Mode ...................................... 8

Exit From the Valet Mode.......................... 9

Arming

Arming Methods ...................................... 10

Manual Arming (Remote Controlled) ...... 10

Auto Arming (Passive) ............................ 11

Alarm Mode

Alarm Triggered Mode............................. 1 2

Disarming

Remote Controlled Disarming................. 13

Please write the serial number of the remote control and the main unit below. Keep this booklet as a record of your purchase.

Remote Control No.:

, Main Unit No.:

5 6

Glass Hatch

Glass Hatch............................................. 14

Panic

Activating the Panic Function ................. 15

Deactivating the Panic Function ............. 15

Tripped Sensor Warning and Indication

Tripped Sensor Warning ......................... 16

Tripped Sensor Indication (using both the

transmitter and ignition key).................... 17

Tripped Sensor Indication (using only

the ognition key)...................................... 18

Remote Control Code Programming (Only vehicles vehicles without Power Door Locks)

How to Program Remote Control

Transmitters ............................................ 19

Optional Items

Hood switch............................................. 22

Glossary........................................................ 23

Introduction

Congratulations on your purchase of this Honda Security System. Your Honda Security System is the product of years of research and development. It will give y ou many years of reliab le performance, protection, and convenience.

The system consists of two major components: a main unit and a remote control transmitter.

The main unit is the “brain” of the system . The b uilt-in programmable microprocessor monitors your vehicle f or optimal protection while offering various options to tailor the system to the preferences of different users.

The remote control allows you to turn the system on and off from outside the vehicle while simultaneously locking and unlocking the doors*. The tr ansmitter can also be used to intentionally activate the horn in case of an emergency.

T o tak e full advantage of y our Honda Security System, we encourage you to read this manual thoroughly .

The Security System can be operated with the vehicle’s K eyless Entry System. For operation of the K eyless Entry System, refer to the vehicle Owner’ s Manual or Owner’s Manual for the optional keyless entry system.

Only on vehicles equipped with power door locks.

Due to the expertise required to properly install the Honda Security System, we highly recommend that the installation be performed by your Honda dealer . Proper wiring and component placement are essential for optimum system performance.

Emergency Disarming

Disarming

• The system can be disarmed using the Ignition key regardless of the method used to arm the system.

• This method of disarming also serves as an emergency override if the remote control transmitter cannot be used.

Enter the vehicle and insert the ignition key .

OFF

During the Entry Delay Time

OFF

T urn the ignition key to the “ON” (II) position. The security system will disarm when the ignition key is turned to the on position.

• When the system is being armed by the AUT O arming method, there is a 20 second entry delay time after opening a door.

• If the system is armed by the remote control transmitter, the entry delay time is changed to zero seconds, and the alarm is triggered immediately when a door is opened.

Insert the ignition key after opening the door. T urn the ignition ke y to the “ON” (II) position. The security system will disarm when the

ignition key is turned to the on postion.

System Controls

Arming Mode (MANUAL AUTO)

1 2

4713010M

This section explains how to switch the arming mode from MANU AL to A UT O.

NOTE:

Factory preset is MANUAL.

Disarm the security system. Steps from 2 to 4 must be completed within 3 seconds.

Insert the ignition key , and remove the iginition ke y from the iginition switch. (All the way out.)

Insert the ignition key , and remove the ignition k ey from the ignition switch. (All the way out)

within 3 seconds

Insert the ignition key. Y ou will observe the f ollowing.

• The system “beep” once. MANUAL MODE

AUTO MODE

The switching procedure is

Completed Beep once

Not completed No beep

The result

System Controls

Arming Mode

This section explains how to switch the arming mode from A UT O to MANU AL.

(AU T O MANUAL)

OFF

2 3

4713010M

within 3 seconds

4713010M

T urn the ignition ke y to the OFF position. Remove the key from the ignition s witch.

Open a door and close it. (The EXIT delay starts.)

NOTE: Steps 4 to 6 m ust be completed within 3 seconds.

Insert the ignition key , and remove the ignition k ey from the ignition switch. (All the way out)

Insert the ignition key. Y ou will observe the f ollowing.

• The system “beeps” twice.

AUT O MODE

MANUAL MODE

The switching procedure is

Completed Beep twice

Not completed No beep

The result

Valet (Auto Arming Mode only)

Placing the System in the Valet Mode (V alet Mode cannot be used in the

Manual Arming Mode)

1 2

4713010M

Status LED

Disarm the security system. Steps from 2 to 4 must be completed within 3 seconds.

Insert the ignition key , and remove the iginition ke y from the iginition switch. (All the way out.)

Insert the ignition key , and remove the ignition k ey from the ignition switch. (All the way out)

within 3 seconds

Insert the ignition key. The Status LED will flash once, indicating that the system is in the V alet mode .

When the security system is placed in the valet mode, it is temporarily placed on “hold. ” When in the valet mode, the system cannot be armed, but panic mode is still functional. This is a convenient feature if the car is to be w ashed, serviced, or valet parked.

Valet (Auto Arming Mode only)

In the Valet Mode:

LED

If you follow either procedure below , LED b links once to show the system is in the Valet mode.

Open one of the doors. LED blinks once.

After turning the ignition switch to OFF , remo ve the ignition ke y. LED blinks once.

Keyless/Security during the Valet Mode.

Lock/Unlock of Keyless

V ALET MODE is ON Active Active Non-Active

V ALET MODE is OFF Active Active Active

Panic of Ke yless

Set/Unset of Security

Exit From the Valet Mode

Valet (Auto Arming Mode only)

1 2

4713010M

Status LED

With the system in the Valet mode and the key out of the ignition switch.

Steps from 2 to 4 must be completed within 3 seconds.

Insert the ignition key , and remove the iginition ke y from the iginition switch. (All the way out.)

Insert the ignition key , and remove the ignition k ey from the ignition switch. (All the way out)

within 3 seconds

Insert the ignition key. The Status LED will flash twice, indicating that the system is out of the V alet mode . The system is now in the Disarm mode.

+ 19 hidden pages