Honda Automobiles PKH3 User Manual

Firmware: PKH3 - Installation Instructions

Check for firmware updates before installing

Honda/Acura Transponder Interface: TYPE-C (7 Wire Connector) Platform #05 firmware:- *PKT2, PKH1, PKH2, PKH3, PKH4, PKN2, PKM2, PKHY1, PKG3, PKG8

manufacturer or the distributors of the bypass kit / data

bus interfacepart(s) be held liable for anyconsequential

damages sustained in connection with the part(s)

installation. The manufacturer and it’s distributors will

not, nor will they authorize any representative or any

other individual to assume obligation or liability in

relation tothe by passkit /data bus interfacepart(s) other

than itsreplacement.

Programming LED

This bypass kit / Data Bus Interface part hasbeen tested

on the listedvehicles. Other vehicles willbe added to the

select vehicle list upon completion of compatibility

testing. Visit websitefor latest vehicle application guide.

DISCLAIMER

: Under no circumstances shall the

Downloadable @ www.XpressDownload.com

D2U

Brown (-)

Green

Blue

Violet/White

Violet

Pink/White

Pink

10 PIN HARNESS

Orange

Red

Black

Programming button

Upgrade (Optional)

Data 2 Data (Optional)

Ground output when running (-) (remote start installations only)

Ignition Input from ECM (See Vehicle Wire List for Pin # and Wire Color)

Data (See Vehicle Wire List for Pin # and Wire Color)

Ignition Out (See Vehicle Wire List for Pin # and Wire Color)

Ignition Input from ECM (See Vehicle Wire List for Pin # and Wire Color)

(+)12 VOLT CONSTANT

CHASSIS GROUND

Programming

Interface

Front view of connector

*Default Firmware

USB

TO ECM

P.C.

REMOTE

SYSTEM

WIRE FUNCTIONS

Brown Green Blue Violet/White Violet Pink/White Pink Orange Red

10 PIN HARNESS

Black

This connector has dual functions: 1) XKLOADER Firmware Upgrades. 2) 4 Pin Data 2 Data connector to remote system, which replaces wire to wire (w2w) connection on the 10 Pin Harness.

D2U

VEHICLE

Acura EL 1.7

2005 - 01

Acura MDX

2005 - 03

Acura RSX

2005 - 02

Acura TSX

2005 - 03

Acura TL

2005 - 04

Honda Accord

2005 - 03

Honda Civic

2005 - 01

Honda CRV

2005 - 03

Honda Element

2005 - 03

Honda Pilot

2005

Honda Odyssey

2005

Honda Ridgeline

2006

Ground output when running (-) (remote start installations only) N/C Ignition Input from ECM (See Vehicle Wire List for Pin # and Wire Color) N/C Data Ignition Out (See Vehicle Wire List for Pin # and Wire Color) Ignition Input from ECM (See Vehicle Wire List for Pin # and Wire Color) N/C (+)12 VOLT CONSTANT CHASSIS GROUND

Data (Code)

Red/Blue

Pos.:#2

Red

Pos.:#2

Red/Blue

Pos.:#2

Red/Blue

Pos.:#2

Red/Blue

Pos.:#2

Red/Blue

Pos.:#2

Red/Blue

Pos.:#2

White

Pos.:#2

White

Pos.:#2

Red/Green

Pos.:#2

Red/Blue

Pos.:#2

Red/Blue

Pos.:#2

Ignition Ground (Gnd)

Black/Yellow

Pos.:#6

Green/White

Pos.:#6

Black/Yellow

Pos.:#6

Black/Yellow

Pos.:#6

Black/Blue

Pos.:#6

Black/Yellow

Pos.:#6

Black/Yellow

Pos.:#6

Black/Yellow

Pos.:#6

Black/Yellow

Pos.:#6

Red/White

Pos.:#6

Black/Yellow

Pos.:#6

Black/Green

Pos.:#6

Brown/ Yellow

Pos.:#1

Brown/ Yellow

Pos.:#1

Brown/ Yellow

Pos.:#1

Brown/ Yellow

Pos.:#1

Brown/ Yellow

Pos.:#1

Brown/ Yellow

Pos.:#1

Brown/ Yellow

Pos.:#1

Brown/ Yellow

Pos.:#1

Brown/ Yellow

Pos.:#1

Brown/ Yellow

Pos.:#1

Black

Pos.:#1

Brown/ Yellow

Pos.:#1

Module Programming

1. Press and hold programming button.

2. Turn the ignition key to the “ON” position, the LED will blink.

3. Release programming button.

4.Turn ignition key to the “OFF” position.

Reset

Press and hold programming button and plug module into 10 pin harness, LED comes ON. When LED goes OFF, release program button.