Honda Automobiles 08L07-SJC-100 User Manual
INSTALLATION
4610041H
HandA-Accessories.com
INSTRUCTIONS
Put this information in the glove box with the vehicle owner's manual.
Accessory Application Publications No.
MOTORCYCLE WHEEL GUIDE
P/N 08L07-SJC-100
RIDGELINE
All 28614
Issue Date
FEB 2005
PARTS LIST
Front wheel guide
2 Plates
8 Hex screws
4 Washers
INSTALLATION
Customer Information: The infor mation in this
installation instruction is intended for use only by
skilled technicians who have the proper tools,
equipment, and training to correctly and safely add
equipment to your vehicle. These procedures
should not be attempted by “do-it-yourselfers.”
NOTE:
• Be careful not to damage the body finish.
• Determine the location of the wheel guide. One or
more wheel guides can be installed in three different
locations.
1. Remove the left front upper tie-down hook (two
torx bolts). Remove the right front upper tie-down
hook (two torx bolts).
LEFT FRONT UPPER
TIE-DOWN HOOK
8 Collars
TOOLS AND SUPPLIES REQUIRED
Ratchet
4 mm Hex socket
Drill
3 mm and 9 mm Drill bits
Round file
Eye protection (face shield, safety goggles, etc.)
T50 Torx socket
T40 Torx socket
Center punch
© 2005 American Honda Motor Co., Inc. - All Rights Reserved. AlI 28614 (0502) 1 of 3
TORX
BOLT
08L07-SJC-1000-91
2. Remove the front bed panel (six torx bolts).
FRONT BED
PANEL
TORX BOL TS
(6)
4. While wearing eye protection, enlarge the eight
holes to 9 mm from the outer surface side of the
front bed panel. Remove all burrs from the edges
of the holes with a file.
DRILL
(9 mm drill bit)
FRONT BED
PANEL
(front surface)
3929032H
Installing one wheel guide in the center position
3. Center punch the eight marked locations on the
front bed panel. While wearing eye protection,
drill a 3 mm hole through each of the eight
marked locations.
DRILL
(3 mm drill bit)
FRONT BED
P ANEL (inside)
CENTER
PUNCH
MARKS (8)
3006011H
HOLES (8)
4610050H
5. Position the front wheel guide on the front bed
panel, and install two plates, eight collars, four
washers and eight screws as shown.
FRONT BED
PANEL
PLATE
FRONT
WHEEL
GUIDE
WASHERS (4)
HEX SCREWS (8)
COLLARS (8)
3006022H
6. Reinstall the front bed panel and the upper tiedown hooks.
2 of 3 All 28614 (0502) © 2005 American Honda Motor Co., Inc. - All Rights Reserved.
Loading...