HONDA 08A50-ED1101 User Manual

INSTALLATION INSTRUCTIONS

Accessory Application Publications No.

IN-DASH CD CHANGER

2001 PASSPORT

AII 21962

Issue Date

JULY 2000

PARTS LIST CD Changer

P/N 08A50-ED1101

CD Changer

Owner’s Manual

4 Screws

CD Changer Attachment P/N 2-90101-821-0

INSTALLATION

Customer Information: The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by doĆitĆyourselfers."

1. Write down the customer’s radio station presets; the radio memory will be erased when you disconnect the battery.

2. Disconnect the negative cable from the battery.

3. Remove the ashtray. On A/T models, with the parking brake set, move the shift lever to the “L” position.

LOWER CLUSTER ASSEMBLY

Right bracket

Left bracket

TOOLS REQUIRED

#2 Phillips screwdriver Ratchet 8 mm Socket

CLIPS (4 places)

ASHTRAY (Remove.)

CIGARETTE LIGHTER CONNECTORS

4. Remove the lower cluster assembly (one screw, and gently pull to release the four retaining clips; then unplug the cigarette lighter connectors).

5. Remove and retain the four screws securing the

audio unit. Unplug the 16-pin connector and the antenna lead, and remove the audio unit.

ANTENNA LEAD

AUDIO UNIT

16-PIN CONNECTOR

Retain these screws.

6. Remove and discard the brackets, screws, and the pocket from the audio u nit. Retain the four audio unit bracket screws.

Retain.

BRACKETS (Discard.)

8. Place the audio unit on top of the CD changer.

Using the mounting brackets (sold separately), attach the right and left brackets to the audio u nit and the CD changer using the four screws supplied with the mounting brackets, and the four screws removed in step 6. Tighten the screws securely.

LEFT BRACKET

RIGHT BRACKET

CD CHANGER

9. Plug the 12-pin connector from the CD changer

into the back of the audio u nit.

16-PIN

ANTENNA LEAD

CONNECTOR

Discard.

AUDIO UNIT

POCKET (Discard.)

Discard.

7. Remove and discard the shipping screws and wrapper from the CD changer.

WRAPPER (Discard.)

AUDIO UNIT

Retain

12-PIN CONNECTOR FROM CD CHANGER

10. Plug the 16-pin connector and the antenna lead into the audio unit, then reinstall the audio unit assembly.

11. Reinstall the lower cluster assembly.

12. Reconnect the negative cable to the battery.

13. Check that the CD changer operates according to the owner’s manual supplied with the CD changer.

14. Reset the clock and the radio station presets.

2 of 2

SHIPPING SCREWS (Discard.)

15. Put the CD changer owner’s manual in the glove box for your customer.

AII 21962 (0007)