Homewood OVED1007DOL-1AA Instruction manual

B

© Guernsey 7x10

© 7bi10 DDA

atch No.3943

These instructions are for your safety. Please read through them thoroughly before use .

Version 5 28/11/2013 Valerio Coraggio

PLEASE KEEP THIS LEAFLET FOR FUTURE REFERENCE

GB

IE

Let’s

get started...

Important information...

Safety 03

Preparation of base 04

Warranty 04

Care, maintenance & Recycling 05

In more detail...

Parts List 06

Fascia & Nail List 07

Hardware chart 08

Before you start 09

02

Detailed Technical Drawing 10-13

14-32 Assembly instructions

For a copy of the instructions or a copy in another language please send

EN

Pour obtenir un exemplaire des instructions ou une copie dans une autre

F

langue s'il vous plaît envoyez un e-mail ou écrire à l'adresse ci-dessous.

Per richiedere una copia del libretto di istruzioni, in italiano, o in un’altra

I

lingua, per favore, invia una e-mail o scrivi a l’indirizzo sottostante.

Na kopii instrukcji lub kopii w innym języku prosimy o wysłanie maila

PL

RUS

Для получения копии инструкции или копия на другом языке,
пожалуйста, отправьте по электронной почте или написать по

Başka bir dilde talimatları veya bir kopyasını bir kopyası için bir e-posta

TR

Brigstock Road Wisbech Cambridgeshire PE13 3JJ

an email or write to the address below.

lub pisać na adres podany poniżej.

указанному ниже адресу.

gönderebilir veya aşağıdaki adrese yazınız.

[e-mail]

Tel [phone]

Safety
Check that you have noted all the following instructions:

We advise the use of non slip protective gloves throughout
the assembly process.

We advise the use of steel capped protective footwear
throughout the assembly process.

We advise that you use a helper to hold the glass in position
whilst you nail the beading in place.

We advise the use of protective headwear and safety
goggles throughout the assembly process.

Where a ladder is in use another person must hold the
ladder.

Do not attempt to work in windy conditions.

We advise the use of a scaffold tower when fitting the roof,
for felting or if you cannot reach from the ground.

Do not allow children near the tools and work area.

Follow any safety precautions quoted by the manufacturer
for any equipment you use.

Check all parts before assembly.

Only use child and animal safe wood preservative.

GB

IE

Getting Started…..

Do not use creosote.

Allow the wood preservative to fully dry before use.

Regularly check the building for wear and tear.

Important!

EVERY PRECAUTION IS TAKEN TO ENSURE THAT YOUR BUILDING HAS NO
ELEMENT INCORRECTLY PLACED OR POSSIBLY HAZARDOUS, HOWEVER
PRIOR TO USE PLEASE CHECK ALL SURFACES FOR THE FOLLOWING:

(1) RAISED GRAIN, SPLINTERS: Sand down timber to smooth finish
(2) NAIL/SCREW/PIN HEADS PROUD: Tap home to be flush with surface of

timber

(3) DAMAGED SCREW HEADS RESULTING IN SHARP SPLINTERS OF

METAL: Replace

(4) SHARP ENDS OF NAILS/ SCREWS/ PINS PROTRUDING THROUGH THE

PANEL: Remove and reposition

(5) ENSURE ALL PARTS ARE SECURED AGAINST REASONABLE FORCE:

Remove and refit

(6) ENSURE THERE ARE NO LOOSE PARTS: Remove and refit/discard

IMPORTANT ! For your safet y pl ease
read carefully the safety warnings

03

GB

IE

Getting Started…..

Base and Warranty

Preparation of base...

We recommend that the base onto which your building will stand should be at least
75mm larger in each direction than the total floor size of the building.

Actual floor area of the building: 2048mm x 2970mm
Total height clearance: 2160mm
Roof size: 2200m m wid e x3348mm l ong

The chosen position in your garden for your building should be excavated to a depth
of 75mm to allow a base of sand, on to which paving slabs can be evenly laid.
You may also use an adjustable timber base or a concrete base. Whatever base you
decide upon IT MUST BE LEVEL AND FIRM.

Warranty...

10 Year anti rot warranty subject to the following:

 The building must be raised so it is not in contact with any water

retaining base surface (for example grass)

 This can be achieved using a timber, concrete or slab base

 When using a concrete or slab base use damp proofing strips

under the bearers

 The building must have been completely treated and sealed

immediately prior to or after assembly

 The building must have been re-treated and re-sealed annually

NOTE: Wood is a natural product, and therefore the following are
excluded from the warranty:

- Colour change

- Warping

- Splitting.

04

The following are also excluded:

 Damage resulting from poor assembly

 Poor treatment application

 Poor care and maintenance

 Changes to the design

 Misuse

 General wear and tear.

Care, Maintenance and Recycling

The 5 golden rules of care:

(1) Ensure your base is level and firm.
(2) Ensure the building is not sitting directly on the ground using damp proof

membrane or the optional timber base.

(3) Ensure every piece of timber and surface, especially that is hidden upon

assembly is treated with a top quality wood preservative at least twice
(before assembly). Turn the panels upside down whilst painting so the
treatment runs into the seams.

(4) Garden buildings are not waterproof, therefore we recommend you seal

between all the panels with a silicone based sealant.

(5) Regularly check your roofing felt for weather damage and leaks.

The 6 golden rules of maintenance:

(1) Visually check for weather damage.
(2) Check and replace if necessary any Silicone sealant if used on your

building.
(3) Check the roofing material for wear.
(4) The doors and windows may require periodical adjustment.
(5) Ensure your building is well ventilated especially during hot weather.
(6) During extremely hot periods humidify your building to prevent the timber

from drying out.

GB

IE

Getting Started…..

Recycling and disposal:

1. Pallet and timber widely recycled

2. Cardboard widely recycled

3. Plastic strapping subject to local regulations

4. Plastic sheeting subject to local regulations.

packaging

1. Timber widely recycled

2. Metal fixings widely recycled

3. Glass widely recycled

4. Roofing felt not currently recycled.

Building

05

Description --
(part No ) - q.ty:

Stacked parts list

Floor Joiners (A0002) x12

36mm

46mm

Truss block (A0042) x04

44x44mm

Cover strips (A0016) x10

12mm

44mm

Roof bearers (A0043) x04

Roof panel (A0045) x06

1125mm

770mm

Roof panel (A0046) x02

170mm

1125mm

990mm

Gable Panel

Truss brace (A0041) x2

(A0007) x02

333mm

2048mm

Glazing (A0055) x08

355mm

355mm

Floor (

Plain Panel
(A0004) x06

1710mm

Window Panel (

A0001)

990mm

990mm

x03

2048mm

A0037

) x02

Plain Panel
(A0006) x02

1710mm

310mm

34mm

34mm

Roof bearers/ Roof edging (A0044) x06

34mm

34mm

Roof Edging (A0047) x06

34mm

34mm

06

44x44mm

Truss frame (A0040) x4

44x44mm

3.5m Felt strips (A0054) x03

762mm

1710mm

990mm

Window insert (A0039) x02

8210mm

821mm

Doors (

x02

A0048)

1712mm

676mm 676mm

Description --
(part No ) - q.ty:

Fascia & nail bag contents

Roof support

(A0011) x02

34mm

34mm

Door stop

(A0051) x02

12mm

28mm

Door stop

(A0050) x01

Diamond

(A0019) x02

Fascia

(A0018) x04

70x12 mm

Beading

(A0056) x32

Window Hinges

(A0013) x04

Tee hinge

(A0049) x06

Door Bolt

(A0014) x02

12mm

28mm

8.5mm

8.5mm

Door block

(

A0065) x02

34mm

34mm

Bolt shim

(A0052) x02

12mm

44mm

Casement set

(A0038) x02

Pad Bolt

(A0053) x01

07

Description --
(part No ) - q.ty:

Nail bag contents

08mmFelt Nail

(A0266) x170

16mm Panel Pin

(A0024) x64

40mm Round head nail

(A0025) x246

25mm Posi-drive screw

(A0032) x110

8mm

Hardware Chart

Scale 1:1

60mmPosi-drive screw

(A0035) x71

80mm Posi-drive screw

(A0036) x24

08

Before you start

Things to check before you start:

GB

IE

Ensure your base is ready– See page 3

Check all parts as listed in the parts lists

Read the instructions fully before starting work

Follow all the health and safety guidelines

When you see the drill icon

Only ever drill through the first

piece of framework which will be a

6mm

pilot hole for the screw to attach the

second piece of framework

The required drill bit size is

You will need:

Hammer

Spirit level

Ladder

1mm,3mm 6mm & 8mm

drill bit

Drill

Tape measure & Ruler

Sand paper

shown with the icon.

Gloves

Saw

Pencil

Goggles

A helper for some

tasks

 Screwdriver

 Sharp knife

In more detail…..

09

GB

IE

STH A0013

A0055

70FC-A0018

A0044

A0046

A0037

In more detail…..

A0038

A0014 & A0052

A0049

A0016

A0053

A0039

28R-1698 A0051

TEE TEE

A0056

A0050

A0006

A0019

A0065

34S-309 A0043

34S-309 A0011

A0007

A0004

A0046

44C-

A0016

10

DR1

A0048

A0006

TEE

TEE A0049

A0001