Homewerks Worldwide 7130 13 BT User Manual

HomewerksWW.com

BATH FAN WITH BLUETOOTH®

SPEAKER, LED LIGHT,

AND NIGHT LIGHT

MODEL 7130-13-BT

Español p. 14

U.S. Pat. No. 9,398,357
The BLUETOOTH® word mark and logos are registered trademarks owned by BLUETOOTH SIG, Inc. and any use of the said

mark by Homewerks Worldwide is under license. Other trademark and trade names are those of their respective owners.

Questions, problems, missing parts? Before returning to the store, call our customer
service department at 1-877-319-3757, 7:30 a.m. - 4:30 p.m., CST, Monday - Friday.

READ AND SAVE THESE INSTRUCTIONS

06-17-2019

HomewerksWW.com

TABLE OF CONTENTS

Product Specications

FCC Compliance
Package Contents
Hardware Included
Safety Information
Preparation

......................................................................................................................................... 4

........................................................................................................................ 2

................................................................................................................................2

..............................................................................................................................3

.............................................................................................................................3

..............................................................................................................................4

New Construction Installation Instructions..........................................................................................6

Existing Construction Installation Instructions
BLUETOOTH
Pairing BLUETOOTH
BLUETOOTH

®

Speaker Fan Grille Installation ................................................................................... 9

®

Device to Speaker .......................................................................................10

®

Speaker and Fan Operation .....................................................................................10

....................................................................................7

Care and Cleaning............................................................................................................................ 11

Troubleshooting
Warranty

...........................................................................................................................................13

................................................................................................................................ 12

PRODUCT SPECIFICATIONS

SPECIFICATIONS SPECIFICATIONS

Airow: 110 CFM LED light power consumption: 15W
120V, 60Hz LED light brightness: 800 lumens
Duct diameter: 4 in. LED light color (CCT): 4000K Cool White
Sound output: 1.5 sones Night light color: Blue and 2200K Warm White
Motor power consumption: 30W Weight: 9.5 lbs.
Exhaust fan speed: 1050 RPM

FCC COMPLIANCE

NOTICE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged totry to correct the interference by one or more
of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modications made to this equipment not expressly approved

by the party responsible for compliance could void the user's authority
to operate the equipment.

FCC ID:SYJ7130-13-BT

2

HomewerksWW.com

PACKAGE CONTENTS

A

B

C

D

E

PART DESCRIPTION QTY

A Fan Housing 1

®

B

Grille with BLUETOOTH

Speaker and Light

C Suspension Bracket 2

HARDWARE INCLUDED (not actual size)

AA BB

Wood Screw

M4 x 30

Machine Screw

M4 x 12

Qty. 8 Qty. 4

PART DESCRIPTION QTY

D Suspension Bracket 2

1

E LED Wall Switch 1

3

HomewerksWW.com

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install
the product.

• Always disconnect the power supply prior to servicing
the fan, motor or junction box.

• Follow all local building, safety and electrical codes
as well as NEC (National Electrical Code) and OSHA
(Occupational Safety and Health Act).

• Electric Service supply must be 120 volts, 60 hertz.

• This product must properly connect to the grounding
conductor of the supply circuit.

• Do not bend or kink the power wires.

• Do not use this fan with any solid state control device,
such as a remote control, dimmer switch, or certain
timers. Mechanical timers are not solid state devices.

• Do not install in a ceiling with insulation greater than
R42.

• Duct work should be installed in a straight line with
minimal bends.

• Duct work size must be the same size as the discharge
and should not be reduced. Reducing the duct size
may increase fan noise.

CAUTION

• For general ventilating use only. Do not use to
exhaust hazardous or explosive materials and
vapors.

• Not for use in cooking areas.

• To reduce the risk of injury to persons, install

the fan at least 7 feet (2.1m) above the oor.

WARNING: To reduce the risk of re, electric shock,

or injury to persons, observe the following:

1. Use this unit in the manner intended by the manufac­turer. If you have any questions, please call customer
service.

2. Before servicing or cleaning unit, switch power off at
service panel and lock the service disconnecting means
to prevent power from being switched on accidentally.
When the service disconnecting means cannot be
locked, securely fasten a prominent warning device,
such as a tag, to the service panel.

3. Installation work and electrical wiring must be done by

a qualied person(s) in accordance with all applicable
codes and standards, including re-rated construction.

4. Sufcient air is needed for proper combustion and
exhausting of gases through the ue (chimney) of fuel

burning equipment to prevent backdrafting.Follow the
heating equipment manufacturer´s guideline and safety
standards such as those published by the National Fire
Protection Association (NFPA), and the American Society
for Heating, Refrigeration and Air Conditioning Engineers
(ASHRAE) and local code authorities.

5. When cutting or drilling into the wall or ceiling, do not
damage electrical wiring and other hidden utilities.

6. Ducted fans must always be vented to the outdoors.

7. If this unit is to be installed over a tub or shower, it must
be marked as appropriate for the application and be
connected to a GFCI (Ground Fault Circuit Interrupter) –
protected branch circuit.

8. This ventilation fan is intended to be installed at least

3.28 ft. (1 m) from the showerhead when installing over
a bathtub or shower. Installation within a shower stall
is not recommended for this unit, unless the 3.28 ft.
(1 m) distance can be met.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents. If any part is missing or damaged, do not attempt to assemble, install or operate
the product. Contact customer service for replacement parts at 1-877-319-3757, 7:30 a.m. - 4:30 p.m., CST,
Monday - Friday.

Tools Required for Assembly (not included): Hammer, Flathead Screwdriver, Wire Connectors, Nails, Duct
Tape, Phillips Head Screwdriver, and Utility Knife or Drywall Saw.

Helpful Tools (not included): Electric Drill, Drill Bits

WARNING: Warning: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are
working on is shut off. Either remove the fuse or turn off the circuit breaker before removing
the existing bath fan or installing the new one

Carefully remove unit from carton.

4