![](/html/2e/2e81/2e81bb5c4e5be8cf7a24c2b33a0ffbbcf3fbccc37a01d9b30f70abd816a85efd/bg1.png)
VENTILATING BATH FAN
WITH BLUETOOTH
®
Home
SIMPLE SOLUTIONS FOR A SMARTER HOME
NetWerks
SPEAKER
MODEL #7130-04-BT
Español p. 13
The BLUETOOTH® word mark and logos are registered trademarks owned by BLUETOOTH SIG, Inc. and any use of the said
mark by Homewerks Worldwide is under license. Other trademark and trade names are those of their respective owners.
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-319-3757, 8 a.m. - 5 p.m., CST, Monday - Friday.
READ AND SAVE THESE INSTRUCTIONS
Jan. 11, 2016www.homewerksww.com
![](/html/2e/2e81/2e81bb5c4e5be8cf7a24c2b33a0ffbbcf3fbccc37a01d9b30f70abd816a85efd/bg2.png)
TABLE OF CONTENTS
Product Specications ........................................................................................................................ 2
Package Contents ..............................................................................................................................3
Safety Information ..............................................................................................................................4
Preparation ......................................................................................................................................... 5
New Construction Assembly Instructions ...........................................................................................6
Existing Construction Assembly Instructions ......................................................................................8
®
Pairing BLUETOOTH
Device to Speaker .......................................................................................10
Care and Maintenance .....................................................................................................................10
Troubleshooting ................................................................................................................................12
Warranty ...........................................................................................................................................12
PRODUCT SPECIFICATIONS
SPECIFICATIONS SPECIFICATIONS
Airow: 70 CFM Power consumption: 10.05 W
120 V, 60 Hz Exhaust fan speed: 1150 RPM
Duct diameter: 4 in. Weight: 4.608 lbs.
Sound output: 1.5 Sones
FCC COMPLIANCE
This equipment complies with FCC RF radiation exposure limits
set forth for an uncontrolled environment.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modications or changes
to this equipment. Such modications or changes could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
2
www.homewerksww.com
![](/html/2e/2e81/2e81bb5c4e5be8cf7a24c2b33a0ffbbcf3fbccc37a01d9b30f70abd816a85efd/bg3.png)
PACKAGE CONTENTS
A
PART DESCRIPTION QUANTITY
A Fan body 1
B Grille with speaker 1
B
HARDWARE CONTENTS (shown actual size)
AA
Long Wood
Screw
Qty. 2
www.homewerksww.com
3
![](/html/2e/2e81/2e81bb5c4e5be8cf7a24c2b33a0ffbbcf3fbccc37a01d9b30f70abd816a85efd/bg4.png)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
1. Always disconnect the power supply prior to servicing the fan, motor or junction box.
2. Installation work must be carried out by a qualied person(s) in accordance to all local and safety
codes including the rules for re-rated construction.
3. Follow all local building, safety and electrical codes as well as NEC (National Electrical Code)
and OSHA (Occupational Safety and Health Act).
4. Electric service supply must be 120 volts, 60 hertz.
5. This unit must be properly grounded.
6. Do not bend or kink the power wires.
7. Exercise care to not damage existing wiring when cutting or drilling into walls or ceilings.
8. Sufcient air supply is required for proper combustion and the exhaustion of gases through the
chimney (ue) of fuel burning equipment to prevent back-drafting. See the standards of NFPA
(National Fire Protection Association) and ASHRAE (American Society for Heating Refrigeration
and Air Conditioning Engineers) and the local building code authorities.
9. Do not use this fan with any solid state control device, such as a remote control, dimmer switch, or
certain timers. Mechanical timers are not solid state devices.
10. This ventilation fan is approved for use over a bathtub or shower when installed in a GFCI protected
circuit. Do not use fans over a bathtub or shower that are not approved for that application and
marked accordingly.
11. Do not install in a cooking area.
12. Do not use to exhaust hazardous or explosive vapors.
13. Fans should always be vented to the exterior and in compliance with local codes.
14. Do not install in a ceiling with insulation greater than R42.
15. Duct work should be installed in a straight line with minimal bends.
16. Duct work size must be the same size as the discharge and should not be reduced. Reducing
the duct size may increase fan noise.
17. Prior to service or cleaning this unit, shut off power supply at the panel and lock to prevent the
power from being turned on. If the panel cannot be locked, clearly mark the panel with a warning
tag to prevent the power from being turned on.
18. Use this unit in the manner intended by the manufacturer. If you have any questions, please call
customer service.
19. The fan is intended to be mounted at least 7.6 ft. above the oor.
4
www.homewerksww.com