Home Styles Modern Craftsman Bar Stool User Manual
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5050 89
Modern Craftsman
Bar Stool
Part List
Hardware List
C.
Side Piece
1 pc.
D.
Side Piece
1 pc.
E.
Stretcher
1 pc.
A.
Seat
1 pc.
B.
Back Frame
1 pc.
G.
Front Frame
1 pc.
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
F.
Stretcher
1 pc.
Wood Screw
4 Pcs. (+1 extra)
Tools required for assembly : Phillips screwdriver
Head Cap Bolt
12 Pcs. (+1 extra)
Spring Washer
12 Pcs. (+1 extra)
Flat Washer
12 Pcs. (+1 extra)
Assembly Instruction 2/2
G
D
F
B
E
C
Head Cap Bolt
Spring Washer
Flat Washer
Wood Screw
STEP 1
Attach Side Pieces (C) and (D)
and Stretchers (E) and (F) to
Back Frame (B) with
Head Cap Bolts, Spring Washers
and Flat Washers.
Attach Front Frame (G) to unit
with Head Cap Bolts, Spring
Washers and Flat Washers.
A
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
STEP 2
Turn Seat (A) upside down.
Attach unit to Seat (A) with Wood Screws.
Turn the unit to its’ upright position.
Loading...