88 9001 006C
Cuisine Cart
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
C.
Base
1 Pc.
F.
Back Stretcher
1 Pc.
A.
Side Panel
1 Pc.
B.
Side Panel
1 Pc.
H.
Side Rack
1 Pc.
I.
Side Rack
1 Pc.
Hardware List
J.
Brush Chrome Pipes
3 Pcs.
K.
Base Rack
1 Pc.
L.
Side Tower Bar
1 Pc.
D.
Back Upright
1 Pc.
N.
Door
1 Pc.
E.
Back Panel
2 Pcs.
M.
Shelf
1 Pc.
O.
Door
1 Pc.
G.
Front Rail
1 Pc.
P.
Drawer
1 Pc.
(Please refer to the last page of these
instruction for drawer assembly steps)
Head Cap Bolt(Middle)
for T op
4 Pcs. (+1 extra)
Head Cap Bolt(long)
12 Pcs. (+1 extra)
Caster
two lock
two non-lock
4 Pcs.
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Head Cap Bolt
for Side Tower Bar
2 Pcs. (+1 extra)
Machine Screw
for Knob
2 Pcs.
Wood Screw
for Caster
16 Pcs. (+1 extra)
Adjustable Pin
4 Pcs. (+1 extra)
Knob
2 Pcs.
Wood Plug
8 Pcs. (+1 extra)
Assembly Instructions
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
Wood Screw for Caster
2
/5
STEP 1
Attach Casters to Base (C) with
Wood Screws for Caster.
(See fi gure 1)
Head Cap Bolt
A
Non-Locking Caster
C
Locking Caster
F
G
D
E
E
C
Locking Caster
STEP 2
Attach Side Panel (A) to Base (C) with Head Cap Bolts.
Attach Back Upright (D) to Base (C).
Slide Back Panels (E) into place.
Figure 1
B
Figure 2
Attach Back Stretcher (F) and Front Rail (G) to Side Panel (A) with Head Cap Bolts.
Attach Side Panel (B) to the unit with Head Cap Bolts.
Tighten all Bolts with Hex Wrench. (See fi gure 2)
STEP 3
Attach Side Rack (H) to Side Panel (A)
with Head Cap Bolts.
Attach Brush Chrome Pipes (J) and Base
Rack (K) to Side Rack (H).
Attach Side Rack (I) to Side Panel (A)
with Head Cap Bolts.
J
Assembly Instructions
Head Cap Bolt
H
A
K
I
3
/5
Head Cap Bolt
for Side Tower Bar
B
L
STEP 4
Attach Side Tower Bar (L) to Side Panel (B)
with Head Cap Bolts for Side Tower Bar.
STEP 5
Now, you’ll be able to create your own
kitchen cart. Make your own choice the ‘Top’,
wood or stainless steel or granite.
Place the Top onto the unit with
Head Cap Bolts for Top.
Insert Adjustable Pins into the Side Panels
at the desired level.
Place Shelf (M) into position.
Adjustable Pin
Assembly Instructions
Head Cap Bolt
for Top
M
4
/5
A
N
B
P
O
STEP 6
Attach Knobs to Door (N) and (O)
with Machine Screws.
(See fi gure 3)
Attach Door (N) and (O) to Side
Panel (A) and (B) by sliding the door
lift hinges into the side panel lift
hinges
(See fi gure 4)
Slide Drawer (P) into position.
Cover up all holes with Wood Plugs.
(See fi gure 5)
Figure 3
Figure 4
Figure 5
Drawer (P)
Assembly Instructions
5
/5
Figure 1
P1
P4
P2
P3
MAKE SURE ROLLER
IS ON THE BACK
STEP 2
Slide P5 into grooves in P3 and P4.
Be sure to push P5 all the way forward so it
meets P1
(See fi gure 2)
Figure 3
P1
P4
P5
STEP 1
Attach P1, P2 and P3 using a Phillips Screwdriver
and long Wood Screws (4X), tighten halfway.
Attach P1, P2 and P4 using long Wood Screws
(4X), tighten halfway.
(See fi gure 1)
P1
P3
P5
P4
Figure 2
STEP 3
Insert short Wood Screws (6X) into the pre-drilled
holes in P5, tighten screws.
(See fi gure 3)
P3
P2
Figure 4
STEP 4
Attach Pull Handle with Machine Screws.
(See fi gure 4)
Tighten all screws used in drawer assembly.
Part List Hardware List
P1.
Front Part
1Pc.
P2.
Back Part
1 Pc.
P3.
Side Part
1 Pc.
P4.
Side Part
1 Pc.
P5.
Base Part
1 Pc.
Wood Screw(short)
for Base Drawer
6 Pcs. (+1 extra)
Wood Screw(long)
for Side Drawer
8 Pcs. (+1 extra)
Pull Handle
1 Pc.
Machine Screw
for Pull Handle
2 Pcs.
Loading...