Home Styles 88 9100 104C Assembly Instructions Manual

Page 1
88 9100 104C
.
Black Granite Top
IMPORTANT NOTE
Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the wood parts.
We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed.
Part List
9100 Series Top Assembly Instructions
W. Top
1 pc.
Hardware List
V.
V
Support Top
2 pcs.
M6x30 Head Cap Bolt
6 pcs. (+1 extra)
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Page 2
9100 Series Top Assembly Instructions
STEP 1
Put back end of Top Supports (V) into the pre-drilled holes in unit and attach with Head Cap Bolts.
Head Cap Bolt
W
V
V
STEP 2
Place Top (W) onto the unit and then tighten all Head Cap Bolts.
Head Cap Bolt
STEP 3
Attach Pull Handles to Doors (N) and (O) using Machine Screws. (See Figure 1)
Attach Doors (N) and (O) by sliding door lift hinges into the side panel lift hinges.(See Figure 2)
Slide Drawers (T) and (U) into place.
N
Figure 1
T
T
T
U
Figure 2
O
Page 3
88 9100 104C
Black Granite Top
IMPORTANT NOTE
Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts.
We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed.
Part List
9200 Series Top Assembly Instructions
W. Top
1 Pc.
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Page 4
B
W
9200 Series Top Assembly Instructions
Steel Plate Connector
Flat Washer
Spring Washer
Head Cap Bolt (short)
Figure 1
STEP 1
Remove the drawers from the unit.
Place Top (W) onto the unit and attach it to the body with the Steel Plate Connectors, Flat Washers, Spring Washers and Head Cap Bolts (short). (See Figure 1)
Slide the drawers into place.
Loading...