88 5170 89
Bar Stool
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
B.
Stretcher
1 pc.
A.
Seat
1 pc.
C.
Stretcher
1 pc.
D.
Stretcher
1 pc.
Hardware List
Hex Wrench
1 pc.
E.
Leg
1 pc.
M3.5x40
Wood Screw
6 pcs. (+1 extra)
F.
Leg
1 pc.
G.
Back Frame
1 pc.
M8x40
Head Cap Bolt (short)
3 pcs. (+1 extra)
Flat Washer
11 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
M8x76
Head Cap Bolt (long)
4 pcs. (+1 extra)
Tool(s) required for assembly: Phillips screwdriver
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
M8x50
Head Cap Bolt
4 pcs. (+1 extra)
888-680-7460, 877-831-0319
Spring Washer
11 pcs. (+1 extra)
Assembly Instructions 2/2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
Head Cap Bolt
(long)
Spring Washer
Flat Washer
Figure 1
Head Cap Bolt
Figure 2
STEP 2
(short)
Spring Washer
Flat Washer
Put end of Stretcher C into hole in()
Back Frame.
A
G
STEP 1
Attach Seat (A) to Back Frame (G) with
Flat Washers, Spring Washers, Head Cap
Bolts (long) and Head Cap Bolts (short).
(See Figures 1 and 2)
Flat Washer
Spring Washer
Head Cap Bolt
Figure 3
Slide Leg (E) into position on the unit with
other end of Stretcher C in hole in Leg (E).()
Attach Leg (E) to unit with Flat Washers,
Spring Washers and Head Cap Bolts.
(See Figure 3)
Attach Stretcher C to unit with Wood Screws.()
(See Figure 4)
Wood Screw
Head Cap Bolt
Spring Washer
D
Flat Washer
B
F
Figure 4
C
Wood Screw
E
STEP 3
Put end of Stretcher (D) into hole in Back Frame and
end of Stretcher (B) into hole in Leg (F).
Slide Leg (F) into position on the unit with other end of
Stretchers (B) and (D) in holes in Leg (F).
Attach Leg (F) to unit with Flat Washers, Spring Washers
and Head Cap Bolts.
Attach Stretchers (B) and (D) to unit with Wood Screws.
Tighten all Head Cap Bolts and Wood Screws.
CARE INSTRUCTIONS
NEVER
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
Do not write
directly on surface.
PREVENT
MARKING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
CLEAN
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is underno obligation to provide replacement parts. Parts are not available forfully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
888-680-7460, 877-831-0319
Loading...