Homestyles 88 5170 81 Assembly Instructions
88 5 8170 1
Chair
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
Part List
A.
Seat
1 pc.
B.
Stretcher
1 pc.
C.
Stretcher
1 pc.
Hardware List
D.
Leg
1 pc.
E.
Leg
1 pc.
F.
Back Frame
.1 pc
M3.5x40
Wood Screw
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Tools required for assembly : Phillips screwdriver
4 pcs.(+1 extra)
M8x76
Head Cap Bolt (long)
4 pcs.(+1 extra)
Home Styles Consumer Assistance : www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
M8x40
Head Cap Bolt (short)
3 pcs.(+1 extra)
M8x50
Head Cap Bolt
4 pcs.(+1 extra)
Flat Washer
11 pcs.(+1 extra)
Spring Washer
11 pcs.(+1 extra)
Assembly Instructions 2/2
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep the Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 1
Attach Seat (A) to Back Frame (F) with Flat Washers,
Spring Washers, Head Cap Bolts (long) and Head Cap
Bolts (short). (See Figures 1 and 2)
Head Cap Bolt
(short)
Spring Washer
Figure 1
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt
B
Arrow Sticker
Figure 2
STEP 2
Put end of Stretcher (B) into hole in Back Frame.
Slide Leg (D) into position on the unit with other end of Stretcher
(B) in hole in Leg (D).
Flat Washer
Spring Washer
Head Cap Bolt
(long)
Flat Washer
A
F
D
Attach Leg (D) to unit with Flat Washers, Spring Washers and
Head Cap Bolts. (See Figure 3)
Attach Stretcher (B) to unit with Wood Screws. (See Figure 4),
(See “Arrow” sticker indicating front side)
F
Figure 3
Figure 4
STEP 3
Put end of Stretcher (C) into hole in Back Frame.
Slide Leg (E) into position on the unit with other end of
Stretcher (C) in hole in Leg (E).
Attach Leg (E) to unit with Flat Washers, Spring Washers
and Head Cap Bolts.
Attach Stretcher (C) to unit with Wood Screws.
(See “Arrow” sticker indicating front side)
Wood Screw
C
E
Flat Washer
Spring Washer
Head Cap Bolt
Tighten up all Head Cap Bolts and Wood Screws.
Loading...