Page 1
88 5170 692
Pantry
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
J.
Front Rail
3 pcs.
Hardware List
D.
Side Panel
1 pc.
E.
Side Panel
1 pc.
K.
Stretcher
4 pcs.
F.
Upright
1 pc.
Door
2 pcs.
O.
G.
Upright
1 pc.
H.
Back Panel
2 pcs.
I.
Back Panel
2 pcs.
P.
Door
2 pcs.
M3x16
Wood Screw
for stretcher
4 pcs. (+1 extra)
Adjustable Pin
16 pcs. (+1 extra)
Magnet
2 pcs.
M3x15
Wood Screw
4 pcs. (+1 extra)
M3x30
Wood Screw (long)
6 pcs. (+1 extra)
Carton 88 5170 691 is also needed for assembly.
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
888-680-7460, 877-831-0319
M4x25
Machine Screw
7 pcs.
Knob
7 pcs.
Page 2
Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
The unit must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Attach Stretcher (K) to Side Panel (B),
then flip the lock. (See Figures 1 and 2)
J
K
Attach Back Panels (H), Upright (F) and
Stretcher (K) to unit, then flip the lock.
Attach Magnet to Front Rail (J) at
the pre-drilled holes with
Wood Screws. (See Figure 3)
Attach Front Rail (J) to unit
with Wood Screw (long).
Magnet
H
F
K
H
B
Wood Screw (long)
Figure 1 Figure 2
C
Wood Screw (long)
Wood Screw
Figure 3
STEP 2
Attach Side Panel (C) to unit with
Wood Screw (long) and flip the locks.
Page 3
Assembly Instructions 3/7
STEP 3
Turn unit to its’ upright position.
Attach Top (A) to unit, then flip the locks.
K
A
J
J
Magnet
G
Wood Screw (long)
D
I
I
Attach Front Rails (J) to unit with Wood Screws (long).
K
Attach Stretcher (K) to
Side Panel (D), then flip the lock.
Attach Back Panels (I), Upright (G)
and Stretcher (K) to unit,
then flip the lock.
Attach Magnet to Front Rail (J)
at the pre-drilled holes with Wood Screws.
E
STEP 4
STEP 5
Attach Side Panel (E) to unit with
Wood Screws (long) and flip the locks.
Wood Screw (long)
Page 4
L
Assembly Instructions 4/7
STEP 6
Attach unit to Base (M), then flip the locks.
Attach Top (L) to unit, then flip the locks.
M
STEP 7
Attach unit from Step 3 to unit from Step 6,
then flip the locks.
Insert Adjustable Pins into side panels at the
desired level. (See Figure 4)
Slide Shelves (N) into position.
Adjustable Pin
N
N
Figure 4
N
N
Page 5
Drawer (Q)
Assembly Instructions 5/7
Q4
Q2
Lock
Roller at back
STEP 9
Slide Drawer Bottom (Q5) into the
grooves in Drawer Sides (Q3) and (Q4).
Push Drawer Bottom (Q5) all the way
into Drawer Back (Q2).
Attach Drawer Front (Q1) to unit, then flip
the locks.
Q3
STEP 8
Attach Drawer Sides (Q3) and (Q4) to
Drawer Back (Q2), then flip the locks.
(See Figures 5 and 6)
Figure 5 Figure 6
Q1
Q4
Q5
Part List
Q1.
Drawer Front
1 pc.
Q2.
Drawer Back
1 pc.
Q3.
Drawer Side
1 pc.
Q3
Q2
STEP 10
Attach Knobs with Machine Screws.
Q4.
Drawer Side
1 pc.
Q5.
Drawer Bottom
1 pc.
Page 6
Assembly Instructions 6/7
STEP 11
Level unit by adjusting
the adjustable levelers
on the bottom of unit.
(See Figure 7)
Attach Knobs to Doors (O)
and (P) with Machine Screws.
(See Figure 8)
Attach Doors (O) and (P) to
unit by sliding the door lift hinges
into the side panel lift hinges.
(See Figure 9)
Slide Drawer (Q) into place.
O
O
Q
P
P
Figure 7
Figure 8
Wood Screw
for stretcher
Figure 9
STEP 12
Insert Wood Screws for stretcher
into the pre-drilled holes of stretchers.
Page 7
Assembly Instructions 7/7
IMPORTANT
To help reduce the risk of the unit tipping over, the Tip-over Restraint must be installed following these instructions exactly.
STEP 13
Place unit at desired location.
3/8” wall hole
Drill a 3/8” hole in wall in-line with
the pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Wood Screw.
Move unit back into place.
Slide Tip-over Restraint through
Bracket on wall and Bracket on unit.
(See Figure 10)
Put tie end of Tip-over Restraint into lock
end of Tip-over Restraint and pull until tight.
Anchor in wall
Tie end
Lock end
Bracket at
top of unit
Tip-over
Restraint
Bracket
on wall
Wall Screw
Figure 10
Pre-drilled hole
at top of unit
Wood Screw
Hardware List
Anchor
1 pc. (+1 extra)
Bracket
2 pcs. (+1 extra)
Tip-over Restraint
1 pc. (+1 extra)
Drill 3/8” hole in wall
M3.5x40
Wall Screw
1 pc. (+1 extra)
Top of unit
M3.5x16
Wood Screw
1 pc. (+1 extra)
Page 8
CARE INSTRUCTIONS
NEVER
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
Do not write
directly on surface.
PREVENT
MARKING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
CLEAN
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is underno obligation to provide replacement parts. Parts are not available forfully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
888-680-7460, 877-831-0319
Loading...