Home Styles 5661-25L User Manual
88 5661 25L
Montego Bay
Large Deck Box
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
PART LIST
A.
Seat
1 pc.
D.
Side Panel
1 pc.
E.
Side Panel
1 pc.
B.
Front Panel
1 Pc.
C.
Back Panel
1 Pc.
HARDWARE LIST
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Head Cap Bolt (short)
4 pcs. (+1 extra)
Head Cap Bolt (long)
8 pcs. (+1 extra)
Wood Screw
19 pcs. (+1 extra)
F.
Bottom Panel
1 Pc.
Support
2 pcs.
Steel Plate A
2 Pcs.
Steel Plate B
2 Pcs.
Tools Required For Assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Assembly Instructions
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
Head Cap Bolt (long)
STEP 1
Attach Front Panel (B) and
Back Panel (C) to Side Panel (D)
with Head Cap Bolts (long).
Attach Side Panel (E) to
unit with Head Cap Bolts (long).
Wood Screw
Figure 1
D
F
B
Head Cap Bolt (long)
C
E
A
STEP 2
Place Bottom Panel (F) into
unit with Head Cap Bolts(short).
Attach Seat (A) to unit with
Wood Screws. (See figure 1)
STEP 3
Attach Steel Plate A and B to unit with
Wood Screws into the pre-drilled holes.
(See figure 2 and 3)
Attach Supports to Steel Plate A and B.
Steel Plate A
Figure 2
Steel Plate B
Figure 3
Steel Plate B
Wood Screw
Support
Steel Plate A
Head Cap Bolt (short)
Loading...