Home Styles 5660-594 User Manual
88 5660 594
Bali Hai
Outdoor Glider Bench
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Back Frame
1 Pc.
B.
Seat
1 Pc.
E.
Base Frame
1 Pc.
Hardware List
Side Frame
F.
Base Frame
1 Pc.
C.
1 Pc.
D.
Side Frame
1 Pc.
G.
Stretcher
2 Pcs.
Hex Wrench
(5mm)
2 Pcs.
Hex Wrench
(4mm)
1 Pc.
Small Hex Wrench
(5mm)
1 Pc.
Sleeve Bolt
4 Set.(+1 extra)
Cross Dowel
4 Pcs. (+1 extra)
Small Hex Wrench
(4mm)
1 Pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Head Cap Bolt
(80mm)
2 Pcs.(+1 extra)
Nut
2 Pcs.(+1 extra)
Key Wrench
1 Pc.
Head Cap Bolt
(75mm)
4 Pcs.(+1 extra)
Glider Plate
4 Pcs.
Head Cap Bolt
(60mm)
4 Pcs.(+1 extra)
Plastic Washer
8 Pcs.(+1 extra)
Head Cap Bolt
(50mm)
4 Pcs.(+1 extra)
Metal Washer
24 Pcs.(+1 extra)
Hex Nut
8 Pcs.(+1 extra)
Assembly Instructions
2
/3
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up
the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
* After assembly, item must be level to work properly.
C
B
STEP 1
Attach Side Frames (C)
and (D) to Seat (B) with
Sleeve Bolts. (see Figure 1)
B
Head Cap Bolt
(80mm)
Hex Wrench (5mm)
Nut
B
A
Figure 2
Hex Wrench
(5mm)
Attach Back Frame (A) to unit with Head Cap Bolts (80mm)
and Nuts. (see Figure 2)
Figure 1
Hex Wrench (4mm)
B
E
Sleeve Bolt
Hex Wrench (5mm)
STEP 2
Attach Glider Plates to
Base Frames (E) and (F)
with Head Cap Bolts (60mm),
Metal Washers, Plastic Washers
and Hex Nuts.
(see Figure 3)
Key Wrench
Hex Nut
Metal Washer
B
F
B
D
Figure 3
Metal Washer
Head Cap Bolt
(60mm)
Metal Washer
Plastic Washer
Glider Plate
Hex Wrench
(4mm)
Loading...