Home Styles 5559-83 User Manual
88 5559 83
Floral Blossom
Chaise with Cushion
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Seat
1 pc.
E.
Support
1 pc.
F.
Axle
1 pc.
Hardware List
B.
Arm
1 pc.
G.
Wheel
2 pcs.
C.
Arm
1 pc.
D.
Back Frame
1 pc.
H.
Cushion
1 pc.
Large
Key Wrench
1 pc.
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Nut
6 pcs.(+1 extra)
Bolt
6 pcs.(+1 extra)
Spring Washer
8 pcs.(+1 extra)
Flat Washer (small)
2 pcs.(+1 extra)
Tools required for assembly : Slotted screwdriver
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Head Cap Bolt (large)
2 pcs.(+1 extra)
Flat Washer
6 pcs.(+1 extra)
Head Cap Bolt (long)
2 pcs.(+1 extra)
Flat Washer (large)
2 pcs.(+1 extra)
Head Cap Bolt (short)
2 pcs.(+1 extra)
Nut Cap
6 pcs.(+1 extra)
Wheel Cap
2 pcs.(+1 extra)
Assembly Instructions 2/4
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrenches and Hex Wrench in a safe place as you may need to tighten up the Nuts and Head Cap Bolts
in the future.
STEP 1
Insert all Bolts into the
pre-drilled holes of
Arm (B) and (C).
(See Figure 1)
B
C
Figure 1
STEP 2
Attach Arm (B) to Seat (A) with Flat Washers,
Spring Washers, Nuts and Nut Caps.
(See Figure 2)
B
Flat Washer
Spring
Washer
Nut
Nut Cap
A
Figure 2
Loading...