Home Styles 5559-35 User Manual
88 5559 35
Floral Blossom Bistro Table
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
B.
Leg
4 pcs.
Hardware List
A.
Top
1 pc.
C.
Stretcher
2 pcs.
Key Wrench
1 pc.
Bolt
4 pcs.(+1 extra)
Flat
Washer (small)
8 pcs.(+1 extra)
Flat
Washer(large)
4 pcs.(+1 extra)
Bolt
8 pcs.(+1 extra)
Spring
Washer
4 pcs.(+1 extra)
Bolt Cap
8 pcs.(+1 extra)
Nut
4 pcs.(+1 extra)
Cover
1 pc.
Nut Cap
4 pcs.(+1 extra)
Tools required for assembly : Tools recommended for assembly :Slotted screwdriver Level
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com Revised 17Mar2011
Assembly Instructions
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
B
Flat Washer (small)
B
C
C
Bolt
Bolt Cap
Attach Legs (B) to Stretchers (C)
with Flat Washers (small), Bolts
STEP 1
and Bolt Caps.
B
B
STEP 2
Place Top (A)
upside down on a soft cloth.
Insert all Bolts into the pre-drilled holes
of Top (A). (See figure 1)
Attach unit from Step 1 to Top (A)
with Flat Washers (large), Spring Washers,
Nuts and Nut Caps.
Nut Cap
Nut
Spring Washer
Flat Washer (large)
Bolt
A
STEP 3
Turn the table to its’ upright position.
Figure 1
Figure 2 Figure 3
Cover the umbrella hole with Cover.
(See figure 2)
To level the table, adjust the
adjustable levelers on
the bottom of legs.
(See figure 3)
Loading...