Home Styles 5559-32 User Manual
88 5559 32
Floral Blossom
Round Dining Table
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
B.
Leg
4 pcs.
Hardware List
A.
Top
1 pc.
C.
Side Frame
4 pcs.
Key Wrench
1 pc.
Bolt
4 pcs.(+1 extra)
Spring Washer
12 pcs.(+1 extra)
Flat Washer
12 pcs.(+1 extra)
Nut
12 pcs.(+1 extra)
Cover
1 pc.
Nut Cap
12 pcs.(+1 extra)
Tools required for assembly : Tools recommended for assembly :Slotted screwdriver Level
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Assembly Instructions
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
B
Nut Cap
Nut
Spring Washer
Flat Washer
Assemble Side Frames (C) and Legs (B)
with Flat Washers, Spring Washers, Nuts
and Nut Caps. (See figure 1)
Figure 1
C
B
Nut Cap
Nut
Spring Washer
Flat Washer
B
C
C
C
B
Figure 2
STEP 2
Insert Bolts into the pre-drilled
holes of Top (A) by using
Slotted Screwdriver.
(See Figure 2)
A
STEP 3
Turn the table to its’ upright position.
Cover the umbrella hole with Cover.
To level the table, adjust the adjustable
levelers on the bottom of legs.
(See Figure 3)
Figure 3
Bolt
Attach unit ot Top (A)
with Flat Washers,
Spring Washers, Nuts
and Nut Caps.
Loading...