Home Styles 5554-831 User Manual
88 5554 83
Biscayne Chaise
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Seat
1 pc.
Hardware List
Key Wrench (large)
1 pc.
E.
Support
1 pc.
B.
Arm
1 pc.
Nut (large)
2 pcs.(+1 extra)
C.
Arm
1 pc.
F.
Leg
2 pcs.
Spring Washer (large)
2pcs.(+1 extra)
D.
Back Frame
1 pc.
Flat Washer (large)
2 pcs.(+1 extra)
G.
Wheel
2 pcs.
Wheel Bolt
2 pcs.(+1 extra)
Large
Key Wrench
1 pc.
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc.
Nut (small)
2 pcs.(+1 extra)
Nut (middle)
6 pcs.(+1 extra)
Spring Washer (small)
2 pcs.(+1 extra)
Spring Washer (middle)
6 pcs.(+1 extra)
Tools required for assembly : Slotted screwdriver
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Flat Washer (small)
2 pcs.(+1 extra)
Flat Washer (middle)
6 pcs.(+1 extra)
Head Cap Bolt (round head)
2 pcs.(+1 extra)
Bolt
6 pcs.(+1 extra)
Nut Cap
6 pcs.(+1 extra)
Head Cap Bolt (large)
6 pcs.(+1 extra)
Assembly Instructions 2/3
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrenches and Hex Wrench in a safe place as you may need to tighten up the Nuts and Head Cap Bolts
in the future.
* Use a soft cloth between the parts and the floor.
STEP 1
Insert all Bolts into the
Washer (middle)
Washer (middle)
pre-drilled holes of Seat (A). (See Figure1)
Attach Legs (F) onto Seat (A) with
Flat Washers (middle), Spring Washers (middle),
Nuts (middle) and Nut Caps.
Nut Cap
Nut (middle)
Spring
Flat
F
F
Figure 1
G
A
Nut (large)
Spring Washer (large)
Flat Washer (large)
Plastic Ring is on
outside of wheel
Wheel Bolt
A
Large Key Wrench
Figure 2
Head Cap Bolt (large)
C
STEP 2
Attach Arms (B) and (C) to
unit with Head Cap Bolts (large).
Attach Wheels (F) to unit with
Flat Washers (large),
Spring Washers (large) and Nuts (large).
(See Figure 2)
Spring Washer (large)
Flat Washer (large)
Nut (large)
G
B
Wheel Bolt
Loading...