Home Styles 5552-30 User Manual
88 5554 30
Round Dining Table
42”
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 pc.
B.
Leg
4 pcs.
Hardware List
C.
Stretcher
1 pc.
Nut
16 pcs.(+1 extra)
Nut Cap
16 pcs.(+1 extra)
Key Wrench
1 pc.
Bolt
8 pcs.(+1 extra)
Spring
Washer
16 pcs.(+1 extra)
Flat
Washer
16 pcs.(+1 extra)
Tools required for assembly : Slotted screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
Revised 17Mar2011servicedesk@homestyles-furniture.com
Assembly Instructions
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Nut Cap
Nut
Spring Washer
Flat Washer
Bolt
B
B
C
Flat Washer
Spring Washer
Nut
Nut Cap
B
B
STEP 1
Place Top (A)
upside down on a soft cloth.
Insert all Bolts into
the pre-drilled holes of Top (A).
STEP 2
Attach 2 adjacent Legs
(B) to Top (A) with Bolts, Flat Washers,
Spring Washers, and Nuts.
(See figure 1)
Tighten all Nuts, only ,
with Key Wrench.
half way
STEP 3
Figure 1
Figure 2
A
Attach Stretcher (C) to unit with
Flat Washers, Spring Washers
and Nuts, tighten .
Attach 2X Legs (B) to unit with Flat Washers,
Spring Washers and Nuts.
Tighten all Nuts completely with Key Wrench.
half way
STEP 4
Cover all Nuts with Nut Caps.
Turn the table to its’ upright position.
To level the table, adjust the adjustable
levelers on the bottom of legs.
(See figure 2)
Loading...