88 5549 09
Crescent Hill
TV Stand
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 Pc.
B.
Base
1 Pc.
F.
Back Panel
2 Pcs.
Hardware List
Hex Wrench
1 Pc.
Cam Lock
12 Pcs. (+4 extra)
G.
Back Panel
1 Pc.
H.
Shelf
1 Pc.
Head Cap Bolt
4 Pcs. (+1 extra)
M6x25
C.
Side Panel
1 Pc.
D.
Side Panel
1 Pc.
Magnet
2 Pcs.
J.
Door
1 Pc.
E.
Middle Panel
1 Pc.
I.
Shelf
2 Pcs.
K.
Door
1 Pc.
Pull Handle
2 Pcs.
Small Hex Wrench
1 Pc.
Cam Lock Screw
12 Pcs. (+1 extra)
Adjustable Pin
8 Pcs.
M3x10 M3x15 M4x25
Tapered Wood Screw
4 Pcs. (+1 extra)
Wood Screw
12 Pcs. (+1 extra)
Machine Screw
4 Pcs.
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Assembly Instructions
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the fl oor.
* After assembly item must be level to work properly. Use the included adjustable levelers to level.
Cam Lock Screw
H
Magnet
2
/4
Figure 1
Cam Lock Screw
A
C
Tapered Wood Screw
Figure 2
D
B
STEP 1
Attach Magnets to Shelf (H) with Tapered Wood Screws. (See Figure 1)
Insert Cam Lock Screws into the pre-drilled holes of Top (A), Base (B), Side Panels (C) and (D)
and Shelf (H). (See Figure 2)
STEP 2
Attach Middle Panel (E) to Base (B) with Cam Locks.
(See Figure 3)
Figure 3
Assembly Instructions
B
E
Cam Lock
STEP 3
3
/4
C
F
Head Cap Bolt
F
Cam Lock
Attach Side Panel (C) to unit with
Head Cap Bolts. (See Figure 4)
Slide Back Panels (F) into position.
Figure 4
H
D
STEP 4
Attach Shelf (H) to unit with Cam Locks.
Attach Side Panel (D) to unit with
Cam Locks and Head Cap Bolts.
Head Cap Bolt
Assembly Instructions
STEP 5
4
/4
G
Turn the unit over to its’ upright position.
Slide Back Panel (G) into position.
Insert Adjustable Pins into side panels
and middle panel at the desired level.
Place Shelves (I) into position.
I
I
Adjustable Pin
STEP 6
Attach Pull Handles to Doors (J) and (K) with Machine Screws. (See Figure 5)
Attach Doors (J) and (K) to unit by sliding the door lift hinges into the side panel lift hinges.
(See Figure 6)
Attach Top (A) to the unit with Cam Locks.
Cam Lock
A
Level the unit by adjusting the adjustable
levelers on the bottom of the base legs.
(See Figure 7)
Insert Wood Screws into the
pre-drilled holes in the
back panel. (See Figure 8)
Note : Please make sure unit
is level before tightening
these screws.
Figure 5 Figure 6
J
K
Figure 7
Wood Screw
Figure 8
Loading...