88 5543 131
Bermuda
Pier Cabinet
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
B.
Side Panel
.1 pc
Hardware List
Cam Lock Screw
16 pcs.(+1 extra)
C.
Side Panel
1 pc.
Wood Screw
for Back Panel
and Drawer Bottom
15 pcs.(+1 extra)
D.
Back Panel
1 pc.
Pull Handle
1 pc.
Cam Lock
16 pcs.(+4 extra)
Adjustable Pin
12 pcs.(+1 extra)
Wood Screw (long)
for Drawer Sides
8 pcs. (+1 extra)
Machine Screw
1 pc.
For assembly see instructions in carton 88 5543 132
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Tools recommended for assembly :Level
88 5543 132
Bermuda
Pier Cabinet
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 pc.
G.
Base
1 pc.
I.
Shelf
3 pcs.
E.
Front Stretcher
1 pc.
H.
Plinth
1 pc.
J.
Leg
Fixed Shelf
(Knock-Down Construction, please refer to
.4 pcs
the last page of these instructions for steps
to complete assembling drawers)
F.
1 pc.
Drawer
Also need the following from carton 88 5543 131 :
Part List in carton 88 5543 131
Side Panel (B)
Side Panel (C)
Back Panel (D)
1 pc.
1 pc.
1 pc.
Hardware List in carton 88 5543 131
Cam Lock Screw
Cam Lock
Wood Screw for Back Panels
Adjustable Pin
Pull Handle
Machine Screw for Pull Handle
Wood Screw (long)
Wood Screw
16 pcs.
16 pcs.
9 pcs.
12 pcs.
1 pc.
1 pc.
8 pcs.
6 pcs.
K.
.1 pc
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Tools recommended for assembly :Level
Assembly Instructions 2/5
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
* Use a soft cloth between these parts and the floor.
STEP 1
Insert Cam Lock Screws into the pre-drilled holes of Top (A),
Base (E), Plinth (H).
Cam Lock Screw
B
Side Panel (B) and (C),
C
A
H
Cam Lock Screw
STEP 2
Attach Plinth (H) to Base (G)
with Cam Locks.
Assembly Instructions 3/5
Attach Front Piece (E),
Fixed Shelf (F),
and Base (G) to
Side Panel (B)
with Cam Locks.
(See figure 1)
Slide Back Panel (D)
into place.
Figure 1
Cam Lock
H
B
E
F
D
G
Cam Lock
J
J
G
J
J
C
STEP 3
Attach Side Panel (C)
to the unit with Cam Locks.
Attach Legs (J) into the
pre-drilled holes of Base (G),
Side Panel (C) and tighten.
Assembly Instructions 4/5
STEP 4
Turn the unit to its’
upright position.
Place Top (A) onto the unit
with Cam Locks.
Insert Adjustable Pins into
side panels at the desired level.
Place Shelves (I) into position.
Slide the Drawer (K) into place.
Wood Screw
A
Cam Lock
I
Adjustable Pin
I
Figure 2
K
I
STEP 5
To level the unit, adjust the adjustable
levelers on the bottom of legs.
(see Figure 2)
Insert 9X Wood Screws into the pre-drilled
holes of back panel.
Note: Please make sure unit is level
before tightening these screws.
Drawer (K)
Assembly Instructions 5/5
K3
K2
Figure 1
MAKE SURE ROLLER
IS ON THE BACK
STEP 2
Slide K5 into the grooves in K3
and K4. Be sure to push K5 all
the way forward so it meets K1.
(see Figure 2)
K1
K4
STEP 1
Figure 2
K5
Attach K1 to K3 and K4, using
a and
Phillips screwdriver
wood screws ,
long
tighten halfway.
Attach K2 to K3 and K4 using
wood screws ,
long
tighten halfway. (see Figure 1)
(4X)
(4X)
K1
K3
K4
K2
Figure 3
Part List
K1.
Front Part
1 pc.
K2
K3
K5
K4
K2.
Back Part
1 pc.
K1
K3.
Side Part
1 pc.
STEP 3
Insert wood screws (6X)
into the pre-drilled holes in K5,
tighten screws. (see Figure 3)
Tighten all screws used in
drawer assembly.
Side Part
K4.
1 pc.
short
K5.
Base Part
1 pc.
Loading...