
88 5543 101
Bermuda
Entertainment Credenza
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 pc.
F.
Shelf
4 pcs.
E.
Base
1 pc.
H.
Plinth
1 pc.
Hardware List
Cam Lock Screw
19 pcs.(+1 extra)
Wood Screw
for Back Panel
12 pcs.(+1 extra)
Magnet
2 pcs.
I.
Back Panel
2 pcs.
J.
Back Panel
1 pc.
Pull Handle
2 pcs.
Cam Lock
19 pcs.(+4 extra)
Adjustable Pin
24 pcs.(+1 extra)
Wood Screw
for Magnet
4 pcs.(+1 extra)
Machine Screw
2 pcs.
For assembly see instructions in carton 88 5543 102
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Tools recommended for assembly :Level

88 5543 102
Bermuda
Entertainment Credenza
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
D2.
Middle Panel
.1 pc
N.
Leg
1 pc.
B.
Side Panel
.1 pc
G.
Shelf
2 pcs.
C.
Side Panel
1 pc.
K.
Door
1 pc.
Middle Panel
L.
Door
1 pc.
D1.
.1 pc
M.
Leg
4 pcs.
Also need the following from carton 88 5543 101 :
Part List in carton 88 5543 101
Top (A)
Base (E)
Shelf (F)
Plinth (H)
Back Panel (I)
Back Panel (J)
1 pc.
1 pc.
4 pcs.
1 pc.
2 pcs.
1 pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Hardware List in carton 88 5543 101
Cam Lock Screw
Cam Lock
Wood Screw for Back Panels
Adjustable Pin
Pull Handle
Machine Screw for Pull Handle
Magnet
Wood Screw Magnet
Tools recommended for assembly :Level
19 pcs.
19 pcs.
12 pcs.
24 pcs.
2 pcs.
2 pcs.
2 pcs.
4 pcs.

Assembly Instructions 2/4
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
* Use a soft cloth between these parts and the floor.
STEP 1
Attach 2X Magnets to Top (A) by using Wood Screws in the pre-drilled holes.
Insert Cam Lock Screws into the pre-drilled holes of Top (A),
Base (E) and Plinth (H).
A
B
C
Side Panels (B), (C),
Wood Screw
Magnet
Cam Lock Screw
E
H

STEP 2
Assembly Instructions 3/4
Attach Middle Panel (D1) and (D2)
onto Base (E) with Cam Locks.
(see Figure 1)
B
E
H
D1
D2
Cam Lock
E
C
STEP 3
Attach Plinth (H) to Base (E)
with Cam Locks.
Attach Side Panel (B) and
(C) to unit with Cam Locks
(see Figure 1)
M
STEP 4
Attach Legs (M) and (N)
into the pre-drilled holes
of unit and tighten.
.
Cam Lock
Figure 1
M
M
N
M

STEP 5
Slide Back Panels (I) and (J)
into place.
Attach Doors (K) and (L)
by sliding the door lift hinges
into the side panels lift hinges.
(see Figure 2)
Assemble Pull Handles to
Doors (K) and (L) with Machine Screws.
(see Figure 3)
Cam Lock
K
Assembly Instructions 4/4
I
J
A
I
L
Figure 2
Figure 3
Figure 4
F
G
F
K
F
G
Adjustable Pin
F
STEP 6
Place Top (A) onto unit with Cam Locks.
Insert Adjustable Pins into
side panels and middle panels at the desired level (see Figure 4),
then place Shelves (K) and (L) into position.
To level the unit,
adjust the adjustable levelers on
the bottom of legs. (see Figure 5)
L
Figure 5
STEP 7
Insert 12X Wood Screws from
the back of the unit,
tighten up all the Wood Screws.
Note: Please make sure unit is level before tightening these screws.
Wood Screw