88 5541 101
Windsor
Entertainment Credenza
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 pc.
H.
Base
1 pc.
M.
Shelf
4 pcs.
Hardware List
N.
Shelf
1 pc.
I.
Leg
4 pcs.
G.
Back Panel
1 pc.
O.
Drawer
1 pc.
(Knock-Down Construction, please refer to the last page
of these instructions for drawer assembly steps)
K.
Back Panel
2 pcs.
Wood Screw
for Back Panel
12 pcs.(+1 extra)
Machine Screw
2 pcs.
Pull Handle
1 pc.
Hex Wrench
1 pc.
Head Cap Bolt
8 pcs. (+1extra)
Small
Hex Wrench
1 pc.
Cam Lock
20 pcs.(+6 extra)
Cam Lock Screw
20 pcs.(+2 extra)
Wood Screw
(long)
13 pcs.(+1 extra)
Wood Screw
(short)
6 pcs.(+1 extra)
Adjustable Pin
20 pcs.(+1 extra)
For assembly see instructions in carton 88 5541 102
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
88 5541 102
Windsor
Entertainment Credenza
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List (in this carton)
B.
Side Panel
.1 pc
L.
Back Panel
1 pc.
Middle Panel
C.
Side Panel
1 pc.
P.
Door
1 pc.
D.
E.
Middle Panel
.1 pc
.1 pc
F.
Fixed Shelf
1 pc.
Q.
Door
1 pc.
Also need the following from carton 88 5541 101 :
Part List in carton 88 5541 101
Top (A)
Back Panel (G)
Base (H)
Leg (I)
Back Panel (K)
Shelf (M)
Shelf (N)
Drawer (O)
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
1 pc.
1 pc.
1 pc.
4 pcs.
1 pc.
4 pcs.
1 pc.
1 pc.
servicedesk@homestyles-furniture.com
Hardware List in carton 88 5541 101
Hex Wrench
Small Hex Wrench
Head Cap Bolt
Cam Lock Screw
Cam Lock
Wood Screw for (long)
Wood Screw for (short)
Wood Screw for Back Panel
Adjustable Pin
Pull Handle
Machine Screw
9 pcs.
22 pcs.
27 pcs.
14 pcs.
7 pcs.
13 pcs.
13 pcs.
1 pcs.
2 pcs.
1 pc.
1 pc.
Assembly Instructions 2/5
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
A
STEP 1
Insert Cam Lock Screws
into the pre-drilled holes
of Top (A), Middle Panels (D), (E)
and Base (H).
B
D
E
Cam Lock Screw
STEP 2
Attach Fixed Shelf (F) to
Middle Panels (D) and (E)
with Cam Locks.
(See figure 1)
Slide Back Panel (G)
into position.
H
H
D
F
E
G
Figure 1
G
Cam Lock
Assembly Instructions 3/5
B
C
I
STEP 3
Attach Base (H) to
the unit with Cam Locks.
Attach Side Panel (B) and (C)
to the unit with Cam Locks.
B
I
H
I
Head Cap Bolt
Figure 2
Figure 3
Head Cap Bolt
Cam Lock
Adjustable Pin
M
K
I
with Head Cap Bolts. (see Figure 2)
Attach Legs (I) to the unit
A
L
K
STEP 4
Slide Back Panels
(K) and (L) into place.
N
M
Place Top (A) onto
the unit, using
Cam Locks.
Insert Adjustable Pins into
side panels and middle panels at the desired level (see Figure 3).
Place Shelves (M) and (N) into position.
M
M
Assembly Instructions 4/5
Guide
Figure 4
Guide
unlocked position
Figure 4
P
Guide
locked position
P
Q
O
Bottom roller
Figure 5
STEP 5
Before installing the doors, make sure the door Guides are in the unlocked position.
(See figure 4)
Place the bottom rollers of Door (P) in the bottom groove, then align top of the door with the
upper groove and push up the lock tabs of the Guides. (See figure 5)
Place the bottom rollers of Door (Q) in the bottom groove, then align top of the door with the
upper groove and push up the lock tabs of the Guides. (See figure 5)
Slide Drawer (O) into position.
Figure 6
Figure 7
STEP 6
To level the unit, adjust the adjustable levelers on the bottom of legs. (See figure 6)
Insert 12X Wood Screws from the back of the unit,
tighten up all the Wood Screws. (see Figure 7)
Note: Please make sure unit is level before tightening these screws.
Drawer (O)
Assembly Instructions 5/5
O5
Figure 1
STEP 2
Attach O3 and O4 to the unit
with wood screws (10X),
long
tighten halfway.
Attach O1 to O5 with
short
(see Figure 2)
wood screws (6X).
Tighten all screws used in
drawer assembly.
O2
O3
Figure 2
STEP 1
Attach O2 to O5, using a
and wood screws , tighten halfway.
(see Figure 1)
O2
O5
O1
Phillips screwdriver
(4X)long
O4
Figure 3
Part List
O1.
Front Part
1 pc.
O2.
Back Part
1 pc.
O3.
Side Part
1 pc.
STEP 3
Assemble Pull Handle with
machine screws. (see Figure 3)
O4.
Side Part
1 pc.
O5.
Base Part
1 pc.
Loading...