88 5540 121
Paris
Entertainment Stand
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 pc.
F.
Leg
4 pcs.
G.
Leg
1 pc.
E.
Base
1 pc.
L.
Shelf
1 pc.
Hardware List
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Cam Lock Screw
16 pcs.(+1 extra)
Head Cap Bolt
8 pcs. (+1 extra)
Cam Lock
16 pcs.(+4 extra)
Spring Washer
8 pcs. (+1 extra )
Wood Screw
Magnet
2 pcs.
for Magnet
4 pcs.(+1 extra)
Flat Washer
8 pcs. (+1 extra )
M.
Shelf
2 pcs.
Adjustable Pin
12 pcs.(+1 extra)
Wood Screw
for Back Panel
12 pcs.(+1 extra)
Machine Screw
4 pcs.
Pull Handle
2 pcs.
For assembly see instructions in carton 88 5540 122
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
88 5540 122
Paris
Entertainment Stand
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
C.
B.
Side Panel
.1 pc
Side Panel
1 pc.
D1.
Middle Panel
D2.
Middle Panel
.1 pc
.1 pc
H.
Back Panel
2 pcs.
I.
Back Panel
1 pc.
J.
Door
1 pc.
K.
Door
1 pc.
Also need the following from carton 88 5540 121 :
Part List in carton 88 5540 121
Top (A)
Base (E)
Leg (F)
Leg (G)
Shelf (L)
Shelf (M)
1 pc.
1 pc.
4 pcs.
1 pc.
1 pc.
2 pcs.
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
Hardware List in carton 88 5540 121
Hex Wrench
Small Hex Wrench
Head Cap Bolt
Spring Washer
Flat Washer
Magnet
Wood Screw for Magnet
1 pc.
1 pc.
9 pcs.
9 pcs.
9 pcs.
2 pcs.
5 pcs.
Cam Lock Screw
Cam Lock
Wood Screw for Back Panels
Adjustable Pin
Pull Handle
Machine Screw for Pull Handle
servicedesk@homestyles-furniture.com
17 pcs.
17 pcs.
13 pcs.
13 pcs.
2 pcs.
4 pcs.
Assembly Instructions 2/4
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Cam Lock Screw
Wood Screw
STEP 1
Attach 2X Magnets
to Top (A) by
using Wood Screws
in the pre-drilled
holes (see Figure 1).
Magnet
Figure 1
Insert Cam Lock Screws
into the pre-drilled holes of Top (A),
Base (E).Side Panel (B) and (C),
Cam Lock Screw
E
A
B
C
Figure 2
STEP 2
Attach Middle Panel (D1)
and (D2) onto Base (E)
with Cam Locks. (see Figure 2)
D1
D2
Cam Lock
Cam Lock
Screw
E
B
F
Cam Lock Screw
Cam Lock
Assembly Instructions 3/4
Flat Washer
Spring Washer
Head Cap Bolt
F
Figure 3
C
F
G
STEP 3
Attach Side Panel (B) and (C) to the unit with Cam Locks,
then attach Leg (F) to the unit with Flat Washers, Spring Washers
and Head Cap Bolts. (see Figure 3)
Attach Leg (G) to the pre-drilled hole of base and tighten.
H
Figure 4
J
F
I
H
K
Figure 5
STEP 4
Slide Back Panels (H) and (I) into place.
Attach Doors (J) and (K) by sliding the door lift hinges into the side panels lift hinges.
(see Figure 4)
Assemble Pull Handles to Doors (J) and (K) with Machine Screws. (see Figure 5)
Assembly Instructions 4/4
Cam Lock
Adjustable Pin
A
M
L
M
STEP 5
Place Top (A) onto the unit, using Cam Locks.
Insert Adjustable Pins into side panels and middle panels at the desired level.
Place Shelves (L) and (M) into position.
STEP 6
To level the unit, adjust the adjustable levelers on the bottom of legs.
(See figure 6)
Insert 12X Wood Screws from the back of the unit,
tighten up all the Wood Screws. (See figure 7)
Note: Please make sure unit is level before tightening these screws.
Figure 6
Figure 7
Loading...