88 5536 09
City Chic
Entertainment Stand
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Casual Attire For Today's Home
Door
1 pc.
E.
Base
1 pc.
J.
A.
To p
Side Panel
F.
Shelf
1 pc.
K.
Door
1 pc.
B.
C.
Side Panel
.1 pc
G.
Shelf
2 pcs.
1 pc.
Middle Panel
H.
Back Panel
2 pcs.
D1.
.1 pc
I.
Back Panel
1 pc.
D2.
Middle Panel
.1 pc
Hardware List
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Cam Lock Screw
12 pcs.(+1 extra)
Cam Lock
12 pcs.(+4 extra)
Magnet
2 pcs.
Wood Screw
for Magnet
4 pcs.(+1 extra)
Head Cap Bolt
6 pcs. (+1 extra)
Adjustable Pin
12 pcs.(+1 extra)
Assembly Instructions 2/4
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
Cam Lock Screw
Magnet
A
STEP1
Attach 2X Magnets to
Top (A) by using Wood Screws
in the pre-drilled holes (see Figure 1).
Figure 1
Insert Cam Lock Screws into
the pre-drilled holes of Top (A), Side Panel (B), (C) and Base (E).
B
E
C
Cam Lock Screw
STEP 3
Attach Middle Panel (D1)
and (D2) onto Base (E)
with Cam Locks
(see Figure 2).
Figure 2
Assembly Instructions 3/4
D1
D2
Cam Lock
Cam Lock Screw
E
B
Cam Lock
Cam Lock Screw
E
STEP4
Attach Side Panel (B) and (C) to the unit with Cam Locks.
C
Head Cap Bolt
Assembly Instructions 4/4
A
J
G
H
F
Adjustable Pin
I
Cam Lock
H
K
G
Figure 3
Figure 4
STEP 5
Slide Back Panels (H) and (I) into place.
Place Top (A) onto the unit using Head Cap Bolts and Cam Locks.
Insert Adjustable Pins into side panels and middle panels at the desired level (see Figure 3).
Place Shelves (G) and (F) into position.
Attach Doors (J) and (K) by sliding the door lift hinges into the side panels lift hinges.
(see Figure 4)
Note: The height of Top (A) can be adjusted slightly when tightening the Head Cap Bolts
so that Top (A) is flush with the Side Panels.
Loading...