88 5531 07
Bedford
Corner Entertainment
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 pc.
E.
Front Rail
1 pc.
Side Panel
G.
Back Panel
.1 pc
B.
.1 pc
F.
Base
.1 pc
I.
Back Panel
.1 pc
C.
Side Panel
1 pc.
J.
Back Panel
Middle Panel
.1 pc
D1.
.1 pc
K.
Plinth
1 pc.
D2.
Middle Panel
.1 pc
H.
Back Panel
.1 pc
L.
Shelf
2 pcs.
Hardware List
Cam Lock Screw
31 pcs.(+2 extra)
Hex Wrench
1 pc.
Tools required for assembly : Phillips screwdriver
Cam Lock
31 pcs.(+6 extra)
M.
Shelf
4 pcs.
Wood Screw
for Base and
Back Panel
13 pcs.(+1 extra)
Flat Washer
for Wood Screw
13 pcs. (+1 extra )
N.
Door
1 pc.
Machine Screw
2 pcs.
Adjustable Pin
24 pcs.(+1 extra)
O.
Door
1 pc.
Pull Handle
2 pcs.
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
IMPORTANT
Do not tighten screws until each part is properly assembled.
STEP 1
Insert Cam Lock Screws into the pre-drilled holes
of Top (A), Side Panel (B) and (C),
Back Panel (I) and (J),
Plinth (K), then tighten.
Assembly Instructions 2/4
Cam Lock Screw
A
B
C
K
I
J
STEP 2
Attach Middle Panels (D1) and (D2)
to Base (F) using Flat Washers
and Wood Screws.
Assembly Instructions 3/4
D1
D2
F
Flat Washer
Wood Screw
B
F
I
STEP 3
Attach Plinth (K) to Base (F) with Cam Locks.
K
E
Figure 1
C
J
Attach Back Panels (I) and (J) to unit with Cam Locks.
Attach Side Panels (B), Front Rail (E) and Side Panel (C)
to unit with Cam Locks. (see Figure 1)
STEP 4
Attach Back Panel (G) and (H)
to the unit with Flat Washers
and Wood Screws.
Flat Washer
Wood Screw
Adjustable Pin
Figure 2
Assembly Instructions 4/4
G
H
Figure 3
Figure 4
STEP 5
Place Top (A) onto unit
with Cam Locks.
N
M
M
L
L
A
Adjustable
Pin
M
O
M
Insert Adjustable Pins into side panels and middle panels at the desired level
(see Figure 2), then place Shelves (L) and (M) into position.
Assemble Pull Handles to Door (N) and (O) with Machine Screws. (see Figure 3)
Attach Door (N) and (O) to the side panels, by sliding the door lift hinges into the side panels
lift hinges. (see Figure 4)
Loading...