Page 1
88 5530 101
Naples
Entertainment Credenza
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 pc.
H.
Plinth
1 pc.
I.
Base
1 pc.
R.
Back Support
1 pc.
Hardware List
Cam Lock Screw
28 pcs.(+2 extra)
Magnet
4 pcs.
J.
Back Panel
1 pc.
K.
Back Panel
2 pcs.
Adjustable Pin
20 pcs.(+1 extra)
Pull Handle
4 pcs.
Cam Lock
28 pcs.(+6 extra)
Wood Screw
for Magnet
8 pcs.(+1 extra)
Wood Screw
for Wood Block
12 pcs.(+1 extra)
Wood Screw
for Back Panel
12 pcs.(+1 extra)
For assembly see instructions in carton 88 5530 102
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Machine Screw
4 pcs.
Page 2
88 5530 102
Naples
Entertainment Credenza
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List (in this carton)
B.
Side Panel
L.
Shelf
1 pc.
M.
Shelf
4 pcs.
D.
Middle Panel
.1 pc
C.
Side Panel
.1 pc
1 pc.
Door
1 pc.
P.
Q.
Door
1 pc.
E.
Middle Panel
.1 pc
F.
Fixed Shelf
1 pc.
G.
Back Panel
1 pc.
N.
Door
1 pc.
O.
Door
1 pc.
S.
Leg
1 pc.
Also need the Parts and Hardware from carton 88 5530 101
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
T.
Wood Block
4 pcs.
Page 3
Assembly Instructions 2/4
STEP 1
Attach 2X Magnets to
Top (A) by using Wood Screws
into the pre-drilled holes
(See figure 1).
Attach 2X Wood Blocks (T) to Top (A)
by using Wood Screws for Wood Block into
the pre-drilled holes.
Insert Cam Lock Screws into
the pre-drilled holes of Top (A).
(Figure 1)
Wood Screw for Wood Block
STEP 2
Attach 2X Wood Blocks (T) to Base (I)
by using Wood Screws for
Wood Block into
the pre-drilled holes.
Insert Cam Lock Screws
into the pre-drilled holes
of Side Panel (B) and (C),
Middle Panel (D) and (E),
Plinth (H) and Base (I).
T
B
H
T
Wood Block
C
I
Cam Lock Screw
Wood Screw
Magnet
A
T
D
E
Wood Screw
for Wood Block
Wood Block
T
(Figure 2)
Magnet
D
F
E
Cam Lock Screw
Cam Lock
G
STEP 3
Attach 2X Magnets to Fixed Shelf (F)
by using Wood Screws in the pre-drilled holes.
Attach Fixed Shelf (F) to Middle Panel (D) with Cam Locks (See figure 2), then slide
Back Panel (G) into position.
Attach Middle Panel (E) to the unit with Cam Locks.
Page 4
Assembly Instructions 3/4
Cam Lock
H
I
B
S
R
Attach Base (I) to the unit with Cam Locks.
Put 3X Cam Lock Screws into the pre-drelled holes of Base (I) as shown, then attach
Back Support (R) to Base (I) with Cam Locks and attach Side Panel (B) and (C), Plinth (H)
C
Cam Lock Screws
STEP 4
to the unit with Cam Locks.
Adjustable Pin
(Figure 3)
STEP 5
Slide Back Panels
(J) and (K) into place.
Place Top (A) onto
the unit, using
Cam Locks.
Cam Lock
M
M
Tighten up Leg (S) in the pre-drilled hole of unit as shown.
A
K
J
K
M
L
M
Insert Adjustable Pins into
side panels and middle panels at the desired level. (See figure 3)
Place Shelves (L) and (M) into position.
Page 5
P
Assembly Instructions 4/4
(Figure 4)
N
(Figure 5)
O
STEP 6
Attach Doors (N), (O), (P) and (Q) by sliding
the door lift hinges into the side panels lift hinges. (See figure 4)
Assemble Pull Handles to Doors with Machine Screws. (See figure 5)
Q
(Figure 6)
STEP 7
Insert 12X Wood Screws from the back of the unit,
tighten up all the Wood Screws. (See figure 6)
Note: Please make sure unit is level before tightening these screws.
Loading...