Home Styles 5530-09 User Manual

88 5530 09
Naples
Entertainment Stand
IMPORTANT NOTE
Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed.
Part List
A. Top
1 pc.
E. Base
1 pc.
H. Back Panel
2 pcs.
L. Shelf
1 pc.
M. Shelf
2 pcs.
B.
Side Panel
.1 pc
F. Back Support
1 pc.
I. Back Panel
1 pc.
J. Door
1 pc.
N. Front Rail
1 pc.
C. Side Panel
1 pc.
Middle Panel
G. Plinth
1 pc.
D1.
.1 pc
K. Door
1 pc.
D2.
Middle Panel
.1 pc
O. Wood Block
4 pcs.
Hardware List
Cam Lock Screw
29 pcs.(+2 extra)
Cam Lock
29 pcs.(+6 extra)
Adjustable Pin
12 pcs.(+1 extra)
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Wood Screw for Wood Block
12 pcs.(+1 extra)
Wood Screw for Plinth
2 pcs.(+1 extra)
Wood Screw for Back Panel
8 pcs.(+1 extra)
Pull Handle
2 pcs.
Machine Screw
2 pcs.
Assembly Instructions 2/5
IMPORTANT *Do not tighten up all the screws until each part is properly assembled. *Use a soft cloth between these parts and floor.
STEP 1
Attach 2X Wood Blocks (O) to Top (A) and Base (E) by using Wood Screws for Wood Block into the pre-drilled holes.
Insert Cam Lock Screws into the pre-drilled holes of Top (A), Side Panel (B) and (C), Base (E), Plinth (G).
O
B
Wood Screw for Wood Block
Wood Block
A
O
Cam Lock Screw
O
Wood Screw
for Wood Block
Wood Block
E
C
O
G
D1
Assembly Instructions 3/5
D2
Figure 1
STEP 2
Attach Middle Panel (D1) and (D2) onto Base (E) with Cam Locks. (see Figure 1)
Cam Lock
Cam Lock
Screw
E
Cam Lock Screw
Cam Lock
F
STEP 3
Put the Cam Lock Screws into the pre-drilled holes at the underside of Base (E).
Attach Back Support (F) to the unit with Cam Locks.
E
G
Assembly Instructions 4/5
Magnet
N
B
G
STEP 4
Attach Plinth (G) to the unit with Cam Locks.
Attach Side Panel (B) and Front Rail (N) to the unit with Cam Locks, then attach Side Panel (C) to the unit with Cam Locks.
Tighten up 2X Wood Screws for Plinth
Cam Lock Screw
Cam Lock
C
Wood Screw (for Plinth)
I
J
Figure 2
Figure 3
H
H
STEP 5
Slide Back Panels (H) and (I) into place.
Attach Doors (J) and (K) by sliding the door lift hinges into the side panels lift hinges. (see Figure 2)
Assemble Pull Handles to Doors (J) and (K) with Machine Screws. (see Figure 3)
K
STEP 6
Assembly Instructions 5/5
A
Cam Lock
Adjustable Pin
M
L
M
Place Top (A) onto the unit, using Cam Locks.
Insert Adjustable Pins into side panels and middle panels at the desired level.
Place Shelves (L) and (M) into position.
STEP 7
Insert 8X Wood Screws from the back of the unit, tighten up all the Wood Screws. (See figure 4)
Note: Please make sure unit is level before tightening these screws.
Figure 4
Loading...