Page 1
88 5527 09
Homestead
Entertainment Stand
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
Top
1 pc.
Side Panel
B.
.1 pc
C.
Side Panel
1 pc.
E.
Base
1 pc.
F.
Plinth
1 pc.
J.
Door
1 pc.
Hardware List
K.
Door
1 pc.
G.
Leg
4 pcs.
L.
Shelf
1 pc.
H.
Back Panel
2 pcs.
Middle Panel
M.
Shelf
2 pcs.
D1.
Middle Panel
.1 pc
D2.
.1 pc
I.
Back Panel
1 pc.
Cam Lock Screw
19 pcs.(+1 extra)
Cam Lock
19 pcs.(+4 extra)
Magnet
2 pcs.
Wood Screw
for Magnet
4 pcs.(+1 extra)
Adjustable Pin
12 pcs.(+1 extra)
Machine Screw
2 pcs.(+1 extra)
Pull Handle
2 pcs.
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
servicedesk@homestyles-furniture.com
Page 2
Assembly Instructions 2/4
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Attach 2X Magnets
to front rail of Top (A) with Wood Screws.
Insert Cam Lock Screws into the pre-drilled holes
of Top (A),
Base (E), Plinth (F).
Side Panel (B) and (C),
Magnet
Wood Screw
A
B
C
Cam Lock Screw
E
F
Page 3
Figure 1
Assembly Instructions 3/4
D1
D2
Cam Lock
Cam Lock
Screw
STEP 2
Attach Middle Panel (D1)
and (D2) onto Base (E)
with Cam Locks (see Figure 1).
B
G
G
E
E
F
C
Cam Lock
STEP 3
Attach Plinth (F) to the unit with Cam Locks.
Attach Side Panel (B) and (C) to the unit with Cam Locks.
Attach Legs (G) into the pre-drilled holes of Base (E) and tighten.
G
G
Page 4
Figure 2
Assembly Instructions 4/4
A
Cam Lock
I
H
Figure 3
J
H
STEP 4
Slide Back Panels (H) and (I) into place.
Place Top (A) onto the unit, using Cam Locks.
Attach Doors (J) and (K) by sliding the door lift hinges into the side panels lift hinges
(See figure 2)
Assemble Pull Handles to Doors (J) and (K) with Machine Screws. (See figure 3)
Adjustable Pin
K
STEP 5
Insert Adjustable Pins into
side panels and middle panels at the desired level.
Place Shelves (L) and (M) into position.
To level the unit, adjust the adjustable levelers on the bottom of legs.
(See figure 4)
Figure 4
Loading...