Home Styles 5516-88 User Manual
88 5516 88
.
Barnside Counter
Stool
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A.
A
Seat
1 pc.
B.
Side Stretcher
1 pc.
D.
Front Stretcher
1 pc.
Hardware List
Small
Key Wrench
1 pc.
Key Wrench
1 pc.
C.
Side Stretcher
1 pc.
Wood Screw
6 pcs. (+1 extra)
E.
Leg
1 pc.
Head Cap Bolt
(short)
2 pcs. (+1 extra)
F.
Leg
1 pc.
Head Cap Bolt
4 pcs. (+1 extra)
Head Cap Bolt
(long)
4 pcs. (+1 extra)
G.
Back Frame
1 pc.
Spring Washer
10 pcs. (+1 extra)
Flat Washer
10 pcs. (+1 extra)
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319
Assembly Instruction 2 / 2
A
G
E
C
D
F
B
E
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 1
Attach Seat (A) to Back Frame (G) with Flat Washers,
Spring Washers, Head Cap Bolts (long) and Head Cap Bolts
(short). (see Figure 1), (see Figure 2)
Head Cap Bolt (long)
Spring Washer
Figure 1
Flat Washer
Spring Washer
Head Cap Bolt
Figure 2
Flat Washer
Wood Screw
STEP 2
B
Put end of Stretcher (B) into hole in Back Frame.
Slide Leg (E) into position on the unit with other end of Stretcher (B) in
hole in Leg (E).
Spring Washer
Flat Washer
Head Cap Bolt (short)
A
G
Attach Leg (E ) to unit with Flat Washers, Spring Washers and Head Cap
Bolts. (see Figure 3)
E
Figure 3
Figure 4
Attach Stretcher (B) to unit with Wood Screws. (see Figure 4)
STEP 3
Put end of Stretcher (C) into hole in Back Frame and end of
Stretcher (D) in hole in Leg (E).
Slide Leg (F) into position on the unit with the other end of
Stretcher (C) and Stretcher (D) in holes in Leg (F).
Attach Leg F) to unit with Flat Washers, Spring Washers and
Head Cap Bolts.
F
D
Wood Screw
C
E
Attach Stretchers (C), (D) to unit with Wood Screws.
Tighten up all Head Cap Bolts and Wood Screws.
Flat Washer
Spring Washer
Head Cap Bolt
Loading...